SIST EN ISO 2884-2:2024

Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024)

ISO 2884-2:2003 specifies a general procedure for determining the viscosity of paints, varnishes and related products with a viscosity of up to 34 pascal seconds. It is applicable mainly during production and thinning.

Beschichtungsstoffe - Bestimmung der Viskosität mit Rotationsviskosimetern - Teil 2: Relative Viskositätsmessung mit Scheiben- oder Kugelspindeln bei festgelegten Drehzahlen (ISO 2884-2:2024)

Dieses Dokument legt ein allgemeines Verfahren zum Bestimmen der Viskosität von Beschichtungsstoffen, wie Lacke, Anstrichstoffe und verwandten Produkten sowie Bindemittel fest. Das Verfahren wird hauptsächlich angewendet, um die relative Viskosität eines Produktes zu bestimmen und diese beim Verdünnen während eines Fertigungsprozesses zu überwachen. Es beschreibt eine relative Messung der Viskosität mit Hilfe von Scheiben- oder Kugelspindeln bei bestimmten Geschwindigkeiten.
Das in diesem Dokument festgelegte Verfahren ist für alle Beschichtungsstoffe geeignet, unabhängig davon, ob sie newtonsches Verhalten zeigen oder nicht. Es kann auch bei Stoffen, die Dispersionen von Teilchen enthalten, angewendet werden.

Peintures et vernis - Détermination de la viscosité au moyen de viscosimètres rotatifs - Partie 2: Mesurage relatif de la viscosité avec des agitateurs à disque ou à bille à des vitesses spécifiées (ISO 2884-2:2024)

L'ISO 2884-2:2003 spécifie un mode opératoire général à suivre pour déterminer la viscosité des peintures, des vernis et des produits assimilés dans une gamme de viscosités allant jusqu'à 34 pascals seconde. Elle s'applique essentiellement à la production et à la dilution.

Barve in laki - Določanje viskoznosti z rotacijskimi viskozimetri - 2. del: Merjenje relativne vrednosti viskoznosti z diskom ali kroglico pri določeni hitrosti (ISO 2884-2:2024)

General Information

• Status: Published
• Public Enquiry End Date: 24-Nov-2023
• Publication Date: 13-Aug-2024
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Jul-2024
• Due Date: 28-Sep-2024
• Completion Date: 14-Aug-2024
• Ref Project: EN ISO 2884-2:2024 - Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024)

Relations

• Replaces: SIST EN ISO 2884-2:2006 - Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
• Effective Date: 01-Sep-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN ISO 2884-2:2006
Barve in laki - Določanje viskoznosti z rotacijskimi viskozimetri - 2. del: Merjenje
relativne vrednosti viskoznosti z diskom ali kroglico pri določeni hitrosti (ISO 2884
-2:2024)
Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2:
Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO
2884-2:2024)
Beschichtungsstoffe - Bestimmung der Viskosität mit Rotationsviskosimetern - Teil 2:
Relative Viskositätsmessung mit Scheiben- oder Kugelspindeln bei festgelegten
Drehzahlen (ISO 2884-2:2024)
Peintures et vernis - Détermination de la viscosité au moyen de viscosimètres rotatifs -
Partie 2: Mesurage relatif de la viscosité avec des agitateurs à disque ou à bille à des
vitesses spécifiées (ISO 2884-2:2024)
Ta slovenski standard je istoveten z: EN ISO 2884-2:2024
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 2884-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2884-2:2006
English Version
Paints and varnishes - Determination of viscosity using
rotational viscometers - Part 2: Relative measurement of
viscosity using disc or ball spindles at specified speeds
(ISO 2884-2:2024)
Peintures et vernis - Détermination de la viscosité au Beschichtungsstoffe - Bestimmung der Viskosität mit
moyen de viscosimètres rotatifs - Partie 2: Mesurage Rotationsviskosimetern - Teil 2: Relative
relatif de la viscosité avec des agitateurs à disque ou à Viskositätsmessung mit Scheiben- oder Kugelspindeln
bille à des vitesses spécifiées (ISO 2884-2:2024) bei festgelegten Drehzahlen (ISO 2884-2:2024)
This European Standard was approved by CEN on 28 December 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2884-2:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 2884-2:2024) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2884-2:2006.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 2884-2:2024 has been approved by CEN as EN ISO 2884-2:2024 without any
modification.
International
Standard
ISO 2884-2
Second edition
Paints and varnishes —
2024-07
Determination of viscosity using
rotational viscometers —
Part 2:
Relative measurement of viscosity
using disc or ball spindles at
specified speeds
Peintures et vernis — Détermination de la viscosité au moyen de
viscosimètres rotatifs —
Partie 2: Mesurage relatif de la viscosité avec des agitateurs à
disque ou à bille à des vitesses spécifiées
Reference number
ISO 2884-2:2024(en) © ISO 2024

ISO 2884-2:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 2884-2:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measuring assembly. 1
4.1 General .1
4.2 Spindles .2
4.3 Container .3
4.4 Temperature control device, .3
4.5 Reference fluids .3
5 Sampling . 3
6 Checking the measuring assembly . 3
7 Performance of the measurement . 4
7.1 General .4
7.2 With a reference fluid .4
7.3 With a sample .4
8 Repeatability and measuring error . 5
9 Test report . 5

iii
ISO 2884-2:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes, in collaboration with the European Committee for
Standardization (CEN) Technical Committee CEN/TC 139, Paints and varnishes, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 2884-2:2003), which has been technically
revised.
The main changes are as follows:
— terminology and symbols have been adapted to ISO 3219-1;
— a statement has been added that this document refers to a relative value for viscosity;
— description of the test procedure including the test report has been updated;
— the normative references have been updated.
A list of all parts in the ISO 2884 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
International Standard ISO 2884-2:2024(en)
Paints and varnishes — Determination of viscosity using
rotational viscometers —
Part 2:
Relative measurement of viscosity using disc or ball spindles
at specified speeds
1 Scope
This document specifies a general procedure for determining the viscosity of paints, varnishes and related
products, as well as binders. The method is primarily used to determine the relative viscosity of a product
and to monitor this while thinning during a manufacturing proce
...