SIST EN 1373:2015
(Main)Adhesives - Test method for adhesives for floor and wall coverings - Shear test
Adhesives - Test method for adhesives for floor and wall coverings - Shear test
This European Standard specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under shear forces. The term "wall covering" does not include any type of wallpaper.
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Scherversuch
Diese Europäische Norm legt ein Prüfverfahren für die Messung der Haftung eines mit einem vorgegebenen Substrat geklebten flexiblen oder textilen Boden oder Wandbelags unter der Einwirkung von Scherkräften fest. Die Benennung „Wandbelag“ umfasst keine Art von Papier Wandtapeten.
Adhésifs - Méthodes d'essais d'adhésifs pour revêtements de sol et muraux - Essai de cisaillement
Cette norme spécifie une méthode d'essai pour mesurer l'adhésion d'un revêtement de sol ou d'un revêtement mural, textile ou résilient, collé sur un support donné et soumis à des forces de cisaillement. Le terme « revêtement de mur » (ou « revêtement mural ») n’inclut aucun type de papier peint.
Lepila - Preskusna metoda za lepila za talne in stenske obloge - Strižni preskus
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepila - Preskusna metoda za lepila za talne in stenske obloge - Strižni preskusKlebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - ScherversuchAdhésifs - Méthodes d'essais d'adhésifs pour revêtements de sol et muraux - Essai de cisaillementAdhesives - Test method for adhesives for floor and wall coverings - Shear test83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1373:2015SIST EN 1373:2015en,fr,de01-julij-2015SIST EN 1373:2015SLOVENSKI
STANDARDSIST EN 1373:20001DGRPHãþD
SIST EN 1373:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1373
April 2015 ICS 83.180 Supersedes EN 1373:1999English Version
Adhesives - Test method for adhesives for floor and wall coverings - Shear test
Adhésifs - Méthodes d'essais d'adhésifs pour revêtements de sol et muraux - Essai de cisaillement
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Scherversuch This European Standard was approved by CEN on 16 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1373:2015 ESIST EN 1373:2015
EN 1373:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Apparatus and materials .5 6 Preparation of the test specimens .6 6.1 Cleaning .6 6.2 Sampling of adhesive .6 6.3 Conditioning of materials .6 6.3.1 Adhesive and floor and wall coverings .6 6.3.2 Fibre cement substrate .6 6.3.3 Plywood substrates .7 6.4 Application of adhesive .7 6.5 Bonding of the test covering .7 7 Conditioning of the test specimens .8 8 Test procedure .8 9 Evaluation and expression of results .9 10 Test report .9
SIST EN 1373:2015
EN 1373:2015 (E) 3 Foreword This document (EN 1373:2015) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015 and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1373:1999. The main changes in respect to EN 1373:1999 are the addition of a plywood substrate and the change of the roller dimensions. SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1373:2015
EN 1373:2015 (E) 4 1 Scope This European Standard specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under shear forces. The term “wall covering” does not include any type of wallpaper. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives - Terms and definitions EN 1067, Adhesives - Examination and preparation of samples for testing EN ISO 7500-1, Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1) EN ISO 9142, Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142) EN ISO 10365, Adhesives - Designation of main failure patterns (ISO 10365) EN ISO 15605, Adhesives - Sampling (ISO 15605) ISO 554, Standard atmospheres for conditioning and/or testing - Specifications ISO 3205, Preferred test temperatures 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 and the following apply
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.