Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)

This International Standard specifies a method of measuring the total and diffuse luminous reflectance characteristics of aluminium surfaces, using integrating-sphere instruments. The method described is also applicable to the measurement of specular reflectance (principal gloss value), specularity and diffuseness. The method is unsuitable for use with lighting reflectors.

Anodisieren von Aluminium und Aluminiumlegierungen - Messung der Reflexionseigenschaften von Aluminiumoberflächen mit Hilfe Ulbrichtscher Kugeln (ISO 6719:2010)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Reflexionsvermögens von
Aluminiumoberflächen fest, indem der gesamte und diffuse Lichtreflexionsgrad mit Ulbrichtschen Kugeln
gemessen wird.
Das beschriebene Verfahren ist ebenso zur Messung des gerichteten Reflexionsgrades (Hauptglanzwert), der
gerichteten und der diffusen Reflexion anwendbar.
Das Verfahren ist auf Reflektoren nicht anwendbar.

Anodisation de l'aluminium et de ses alliages - Mesurage des caractéristiques de réflectivité des surfaces d'aluminium à l'aide d'instruments à sphère d'intégration (ISO 6719:2010)

L'ISO 6719:2010 spécifie une méthode de mesure des caractéristiques de réflectivité lumineuse totale et diffuse des surfaces d'aluminium à l'aide d'instruments à sphère d'intégration.
La méthode décrite est également applicable au mesurage de la réflectivité spéculaire (valeur de brillance principale), de la réflectivité totale et de la réflectivité diffuse.
La méthode n'est pas utilisable pour les réflecteurs lumineux.

Anodizacija aluminija in aluminijevih zlitin - Merjenje značilnic odbojnosti aluminijevih površin z napravami z integriranimi kroglicami (ISO 6719:2010)

Ta mednarodni standard določa metodo za merjenje skupnih in difuznih značilnic svetlobne odbojnosti aluminijevih površin z napravami z integriranimi kroglicami. Opisana metoda velja tudi za merjenje odbojnosti (glavne vrednosti sijaja), odsevnosti in difuznosti. Metoda ni primerna za uporabo z reflektorji za razsvetljavo.

General Information

Status
Published
Public Enquiry End Date
09-Nov-2009
Publication Date
30-Nov-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Nov-2011
Due Date
26-Jan-2012
Completion Date
01-Dec-2011

Relations

Buy Standard

Standard
SIST EN ISO 6719:2012
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6719:2012
01-januar-2012
1DGRPHãþD
SIST EN 12373-12:2002
$QRGL]DFLMDDOXPLQLMDLQDOXPLQLMHYLK]OLWLQ0HUMHQMH]QDþLOQLFRGERMQRVWL
DOXPLQLMHYLKSRYUãLQ]QDSUDYDPL]LQWHJULUDQLPLNURJOLFDPL ,62

Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of

aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
Anodisieren von Aluminium und Aluminiumlegierungen - Messung der

Reflexionseigenschaften von Aluminiumoberflächen mit Hilfe Ulbrichtscher Kugeln (ISO

6719:2010)
Anodisation de l'aluminium et de ses alliages - Mesurage des caractéristiques de

réflectivité des surfaces d'aluminium à l'aide d'instruments à sphère d'intégration (ISO

6719:2010)
Ta slovenski standard je istoveten z: EN ISO 6719:2010
ICS:
25.220.20 Površinska obdelava Surface treatment
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 6719:2012 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6719:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 6719:2012
EUROPEAN STANDARD
EN ISO 6719
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 25.220.20 Supersedes EN 12373-12:2000
English Version
Anodizing of aluminium and its alloys - Measurement of
reflectance characteristics of aluminium surfaces using
integrating-sphere instruments (ISO 6719:2010)

Anodisation de l'aluminium et de ses alliages - Mesurage Anodisieren von Aluminium und Aluminiumlegierungen -

des caractéristiques de réflectivité des surfaces Messung der Reflexionseigenschaften von

d'aluminium à l'aide d'instruments à sphère d'intégration Aluminiumoberflächen mit Hilfe Ulbrichtscher Kugeln (ISO

(ISO 6719:2010) 6719:2010)
This European Standard was approved by CEN on 14 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6719:2010: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6719:2012
EN ISO 6719:2010 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 6719:2012
EN ISO 6719:2010 (E)
Foreword

The text of ISO 6719:2010 has been prepared by Technical Committee ISO/TC 79 “Light metals and their

alloys” of the International Organization for Standardization (ISO) and has been taken over as

EN ISO 6719:2010 by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys” the secretariat of

which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the

latest by April 2011.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 12373-12:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
Endorsement notice

The text of ISO 6719:2010 has been approved by CEN as a EN ISO 6719:2010 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 6719:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 6719:2012
INTERNATIONAL ISO
STANDARD 6719
Second edition
2010-10-15
Anodizing of aluminium and its alloys —
Measurement of reflectance
characteristics of aluminium surfaces
using integrating-sphere instruments
Anodisation de l'aluminium et de ses alliages — Mesurage des
caractéristiques de réflectivité des surfaces d'aluminium à l'aide
d'instruments à sphère d'intégration
Reference number
ISO 6719:2010(E)
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 6719:2012
ISO 6719:2010(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

COPYRIGHT PROTECTED DOCUMENT
© ISO 2010

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6719:2012
ISO 6719:2010(E)
Contents Page

Foreword ............................................................................................................................................................iv

1 Scope......................................................................................................................................................1

2 Normative references............................................................................................................................1

3 Principle..................................................................................................................................................1

4 Apparatus...............................................................................................................................................1

4.1 General ...................................................................................................................................................1

4.2 Geometrical specifications of the apparatus......................................................................................2

4.3 Specular-included and specular-excluded determinations ..............................................................2

4.4 Irradiation beam.....................................................................................................................................2

4.5 Housing ..................................................................................................................................................3

5 Calibration and operation of the reflectometer ..................................................................................7

5.1 General ...................................................................................................................................................7

5.2 Reference standards .............................................................................................................................8

6 Measurement .........................................................................................................................................8

7 Expression of results............................................................................................................................8

7.1 Calculation of reflectance values ........................................................................................................8

8 Test report..............................................................................................................................................9

© ISO 2010 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 6719:2012
ISO 6719:2010(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such p
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.