SIST EN 1846-2:2002/A1:2005/AC:2007 - Firefighting and rescue service vehicles

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

TC - Modification to Table 6

Feuerwehrfahrzeuge - Teil 2: Allgemeine Anforderungen - Sicherheit und Leistung

Véhicules des services de secours et de lutte contre l'incendie - Partie 2 : Spécifications communes - Sécurité et performances

Gasilska in reševalna vozila - 2. del: Splošne zahteve - Varnost in obnašanje pri uporabi - Dopolnilo A1 - Popravek AC

General Information

Status

Withdrawn

Publication Date

03-Jul-2007

Withdrawal Date

27-Apr-2009

ICS

13.220.10 - Fire-fighting

43.160 - Special purpose vehicles

Technical Committee

POZ - Požarna varnost

Current Stage

9900 - Withdrawal (Adopted Project)

Start Date

24-Apr-2009

Due Date

17-May-2009

Completion Date

28-Apr-2009

Directive

98/37/EC - Machinery

Mandate

M/079 - Mandate to CEN and CENELEC for standardization in the field of machines

Ref Project

EN 1846-2:2001/A1:2004/AC:2007 - Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

Relations

Corrects

SIST EN 1846-2:2002/A1:2005 - Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

Effective Date

01-Jul-2007

Buy Standard

Corrigendum

EN 1846-2:2002/A1:2005/AC:2007

English, French and German language

2 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN 1846-2:2002/A1:2005/AC:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gasilska in reševalna vozila - 2. del: Splošne zahteve - Varnost in obnašanje pri uporabi - Dopolnilo A1 - Popravek ACFeuerwehrfahrzeuge - Teil 2: Allgemeine Anforderungen - Sicherheit und LeistungVéhicules des services de secours et de lutte contre l'incendie - Partie 2 : Spécifications communes - Sécurité et performancesFirefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance43.160Vozila za posebne nameneSpecial purpose vehicles13.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 1846-2:2001/A1:2004/AC:2007SIST EN 1846-2:2002/A1:2005/AC:2007en,fr,de01-julij-2007SIST EN 1846-2:2002/A1:2005/AC:2007SLOVENSKI
STANDARD

SIST EN 1846-2:2002/A1:2005/AC:2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1846-2:2001/A1:2004/ACJanuary 2007Janvier 2007Januar 2007ICS 13.220.10English versionVersion FrançaiseDeutsche FassungFirefighting and rescue service vehicles - Part 2: Common requirements -Safety and performanceVéhicules des services de secours et delutte contre l'incendie - Partie 2 :Spécifications communes - Sécurité etperformancesFeuerwehrfahrzeuge - Teil 2: AllgemeineAnforderungen - Sicherheit und LeistungThis corrigendum becomes effective on 24 January 2007 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 24 janvier 2007 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 24.Januar 2007 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST

SIST-TS CEN/TS 15989:2015(Main)

Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings

CEN/TS 15989:2015

This Technical Specification is applicable to graphical symbols for control elements and displays and for markings for fire fighting and rescue service vehicles and equipment.

Technical specification
55 pages
English language
sale 10% off
e-Library read for
1 day

29-Dec-2014
17-Jun-2015
01.080.20
13.220.10
43.160
POZ

SIST

SIST EN 1846-3:2013(Main)

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance

EN 1846-3:2013

This part of this European Standard specifies the minimum requirements for safety and performance of some optional specific permanently installed equipment on firefighting and rescue service vehicles, operated by trained persons, as designated in EN 1846-1 and specified in EN 1846-2. The permanently installed equipment covered by this Part of this European Standard is given below: - water installation; - liquid additive installation; - monitor; - equipment gantries; - demountable systems using a hydraulic hook arm. This part of this European Standard should be read in conjunction with any national regulations in force for vehicles using the public roads and with any EU Directives and associated EFTA regulations in force relevant to vehicles and their equipment. For the purposes of this European Standard, the normal ambient temperature range is - 15 °C to + 35 °C. For equipment to be used at temperature outside this temperature range, the particular temperature range should be specified by the user and the manufacturer should determine by a risk assessment any need for additional precautions.

Standard
51 pages
English language
sale 10% off
e-Library read for
1 day

29-Sep-2011
30-Sep-2013
13.220.10
43.160
2006/42/EC
M/396
POZ

SIST

SIST EN 1846-2:2010+A1:2013(Main)

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

EN 1846-2:2009+A1:2013

This European Standard specifies the common requirements for safety and the (minimum) common performance requirements of firefighting and rescue service vehicles as designated in EN 1846-1. When drafting this European Standard it has been assumed that the finished standard automotive chassis (or the chassis designed in accordance with the same principles) that is the basis for the firefighting or rescue vehicle, offers an acceptable safety level for its basic transport functions within the limits specified by the manufacturer. Therefore, this European Standard does not formulate requirements for this chassis. This European Standard deals with all significant hazards, hazardous situations and events relevant to firefighting and rescue service vehicles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Complementary specific requirements for aerial appliances are the subject of the following European Standards: - EN 1777: Hydraulic platforms (HPs) for fire fighting and rescue services, - EN 14043: Turntable ladders with combined movements, - EN 14044: Turntable ladders with sequential movements. These specific requirements may supplement or modify the requirements of this document and they take precedence over the corresponding requirements of this document.

Standard
58 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN 1846-1:2011(Main)

Fire fighting and rescue service vehicles - Part 1: Nomenclature and designation

EN 1846-1:2011

This part of EN 1846 applies to firefighting and rescue service vehicles.
It establishes classes and defines categories which are functions of the use and mass of the vehicles.
A designation system gives the various criteria used for characterizing the vehicles.

Standard
10 pages
English language
sale 10% off
e-Library read for
1 day

19-Dec-2009
18-Sep-2011
01.040.13
13.220.10
43.160
POZ

SIST

SIST EN 1846-2:2010/kFprA1:2012(Amendment)

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

EN 1846-2:2009/FprA1

European Standard specifies the common requirements for safety and the (minimum) common performance requirements of firefighting and rescue service vehicles as designated in EN 1846-1. The amendment add requirements to take into account the temperature of the exhaust system designed in accordance with Euro6

Draft
7 pages
English language
sale 10% off
e-Library read for
1 day

SIST

oSIST prEN 1846-2:2022(Main)

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

prEN 1846-2

1.1   This document specifies the common requirements for safety and the (minimum) common performance requirements of firefighting and rescue service vehicles as designated in EN 1846 1.
NOTE 1   Categories and mass classes of these vehicles are given in EN 1846 1.
When drafting this document, it has been assumed that the finished standard automotive chassis (or the chassis designed in accordance with the same principles) that is the basis for the firefighting or rescue vehicle offers an acceptable safety level for its basic transport functions within the limits specified by the manufacturer. Therefore, this document does not formulate requirements for this chassis.
This document deals with all significant hazards, hazardous situations and events relevant to firefighting and rescue service vehicles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
Complementary specific requirements for aerial appliances are the subject of the following European Standards:
-   EN 1777: Hydraulic platforms (HPs) for firefighting and rescue services,
-   EN 14043: Turntable ladders with combined movements,
-   EN 14044: Turntable ladders with sequential movements.
These specific requirements can supplement or modify the requirements of this document and they take precedence over the corresponding requirements of this document.
NOTE 2   Additional regulations, not dealt with in this document, can apply in relation with the use of the vehicles on public roads.
This document deals with firefighting and rescue vehicles intended for use in a temperature range from -15 °C to +40 °C.
NOTE 3   In the case of utilization outside this temperature range, additional measures might be necessary as agreed between the manufacturer and the user. Such requirements are outside the scope of this document.
1.2   This document does not deal with the following types of firefighting or rescue vehicles or equipment:
-   vehicles designed exclusively for carrying personnel;
-   vehicles with a gross laden mass not exceeding 3 t;
-   boats;
-   aircraft;
-   railway vehicles;
-   ambulances (see EN 1789);
-   provisions for non-firefighting removable equipment driven by PTO;
-   airport vehicles in the scope of the recommendations of the International Civil Aviation Organization (ICAO).
1.3   This document deals with the technical requirements to minimize the hazards listed in Annex K which can arise during operational use, routine checking and maintenance of firefighting and rescue service vehicles when carried out in accordance with the specifications given by the manufacturer or his authorized representative.
It does not cover the hazards generated by:
-   non-permanently installed equipment i.e. portable equipment carried on the vehicle;
-   use in potentially explosive atmospheres;
-   commissioning and decommissioning;
-   electromagnetic compatibility.
Additional measures not dealt with in this document might be necessary for specific use (e.g. fire in natural environment, flooding, etc.).
1.4   This document is not applicable to machines that are manufactured before its date of publication as a European Standard.

Draft
76 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST-TS CEN/TS 15989:2015(Main)

Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings

CEN/TS 15989:2015

This Technical Specification is applicable to graphical symbols for control elements and displays and for markings for fire fighting and rescue service vehicles and equipment.