iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 14638-3:2006

(Main)

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel made to a design justified by finite element and/or experimental methods

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel made to a design justified by finite element and/or experimental methods

Premične plinske jeklenke - Ponovno polnljivi varjeni vsebniki s prostornino, ne večjo kot 150 litrov - 3. del: Varjene jeklenke iz ogljičnega jekla, izdelane po konstrukciji, potrjeni s preskušanjem

General Information

Status
Not Published
ICS
23.020.35 - Gas cylinders
Technical Committee
TLP - Pressure vessels
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
08-Sep-2010
Due Date
13-Sep-2010
Completion Date
08-Sep-2010
Directive
94/55/EC - Transport of dangerous goods by road
96/49/EC - Transport of dangerous goods by rail
96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
Mandate
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
prEN 14638-3 - Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel made to a design justified by finite element and/or experimental methods

Buy Standard

prEN ISO 14638-3:2006prEN ISO 14638-3:2006
PreviousNext
Draft
prEN ISO 14638-3:2006
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI oSIST prEN 14638-3:2006

PREDSTANDARD
marec 2006
Premične plinske jeklenke – Ponovno polnljivi varjeni vsebniki s prostornino,
ne večjo kot 150 litrov – 3. del: Varjene jeklenke iz ogljičnega jekla, izdelane
po metodi, ki je eksperimentalno potrjena
Transportable gas cylinders – Refillable welded receptacles of a capacity not
exceeding 150 li
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 407:2023(Main)
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2023)
EN ISO 407:2023

This document is applicable to pin-index yoke-type valve connections for medical gas cylinders, with a working pressure up to a maximum of 200 bar or test pressure up to a maximum of 300 bar, or both.
NOTE 1    This type of connection is primarily used for small cylinders (5 l or below).
NOTE 2    In this document the unit bar is used, due to its universal use in the field of technical gases. It should, however, be noted that bar is not an SI unit, and that the corresponding SI unit for pressure is Pa (1 bar = 105 Pa = 105 N/m2).
This document specifies:
—    basic dimensions;
—    requirements for alternative designs of the yoke-type valve connections;
—    dimensions and positions for the holes and pins for the outlet connections.
It also specifies the dimensions and positions for the holes and pins for the outlet connections for gases and gas mixtures.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9809-4:2023(Main)
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021)
EN ISO 9809-4:2022

This document specifies the minimum requirements for the materials, design, construction and workmanship, manufacturing processes, examinations and testing at time of manufacture for refillable, seamless, stainless steel gas cylinders with water capacities up to and including 150 l.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE   If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13110:2023(Main)
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
EN 13110:2022

This European Standard specifies minimum requirements for material, design, construction and workmanship, testing and examination during the manufacture of transportable refillable welded aluminium liquefied petroleum gas (LPG) cylinders, having a water capacity from 0,5 litres up to and including 150 litres, exposed to ambient temperature.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10298:2020/A1:2022(Amendment)
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
EN ISO 10298:2020/A1:2022

This document lists the best available acute-toxicity data of gases taken from a search of the current literature to allow the classification of gases and gas mixtures for toxicity by inhalation.
Scope of amendment
Changes to formula in clause 4.3

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11114-6:2022(Main)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022)
EN ISO 11114-6:2022

This document specifies requirements for the test apparatus and test procedure in order to apply oxygen pressure surges consistently to devices being tested for resistance to adiabatic compression and to materials for oxygen compatibility.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13338:2022(Main)
Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
EN ISO 13338:2022

This document specifies the following, in order to determine the corrosiveness of gases and gas
mixtures so that a suitable outlet connection can be assigned to each of them:
— for pure gases and some liquids, a complete list indicating their corrosiveness;
— for gas mixtures, a calculation method, in the absence of experimental data, relating to the
corrosiveness of each of their components.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22434:2022(Main)
Gas cylinders - Inspection and maintenance of valves (ISO 22434:2022)
EN ISO 22434:2022

This document specifies requirements for the inspection and maintenance of valves [including ball
valves and valves with integrated pressure regulator (VIPRs)] for:
a) refillable transportable gas cylinders;
b) cylinder bundles;
c) pressure drums and tubes;
which convey compressed, liquefied or dissolved gases.
This document does not apply to valves for liquefied petroleum gas (LPG).
NOTE Where there is no risk of ambiguity, gas cylinders, cylinder bundles, pressure drums and tubes are
addressed with the collective term “gas cylinders” within this document.
This document is applicable to valves reused at the time of the periodic inspection of gas cylinders,
cylinder bundles, pressure drums and tubes, and can be applied at any other time, e.g. at a change of gas
service (see ISO 11621).
This document does not apply to the routine inspection of valves, e.g. carried out at the time of a gas
cylinder filling.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12245:2022(Main)
Transportable gas cylinders - Fully wrapped composite cylinders
EN 12245:2022

This document specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of fully wrapped composite gas cylinders for compressed, liquefied and dissolved gases.
NOTE 1   For the purposes of this document, the word "cylinder" includes tubes (seamless transportable pressure receptacles of a water capacity exceeding 150 litres and of not more than 3 000 litres).
This document is applicable to cylinders that comprise a liner of metallic material (welded or seamless) or non-metallic material (or a mixture thereof), reinforced by a wound composite consisting of fibres of glass, carbon or aramid (or a mixture thereof) embedded in a matrix.
This document is also applicable to composite cylinders without liners.
This document is not applicable to gas cylinders which are partially covered with fibres and commonly called "hoop wrapped" cylinders. For hoop wrapped composite cylinders, see EN 12257.
NOTE 2   This document does not address the design, fitting and performance of removable protective sleeves. Where these are fitted, they are considered separately.
This document is primarily for compressed, liquefied and dissolved gases other than LPG.
NOTE 3   For dedicated LPG cylinders, see EN 14427.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14427:2022(Main)
LPG equipment and accessories - Transportable refillable composite cylinders for LPG - Design and construction
EN 14427:2022

This European Standard
-   specifies minimum requirements for materials, design, construction, prototype testing and routine manufacturing inspections of fully wrapped composite cylinders with a water capacity from 0,5 litre up to and including 150 litres for liquefied petroleum gases (LPG) exposed to ambient temperatures, with a test pressure of at least 30 bar;
-   is only applicable to cylinders which are fitted with a pressure relief valve (see 4.1.3);
-   is applicable to cylinders with a liner of metallic material (welded or seamless) or non-metallic material (or a mixture thereof), reinforced by fibres of glass, carbon or aramid (or a mixture thereof);
-   is also applicable to composite cylinders without liners.
Cylinders manufactured to this European Standard are suitable for temperatures down to −40 °C.
This European Standard does not address the design, fitting and performance of removable protective sleeves. Where these are fitted, the choice of material and sleeve performance should be considered separately.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14912:2022(Main)
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
EN 14912:2022

This European Standard specifies the requirements for inspection and maintenance of LPG cylinder valves, either manually operated or self-closing, for reuse. It applies when the valve is either inspected or refurbished at the time of periodic inspection of the cylinder.
This European Standard may also be applied at any other time, for example, when maintenance of the valve is necessary.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day