SIST-TS CEN/TS 16157-6:2022
(Main)Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 6: Parking publications
Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 6: Parking publications
This new work item will revise and extend the sixth part of the DATEX II Technical Specifications which defines three DATEX II parking-related publications and a truck parking profile and that supports the exchange of static as well as dynamic information about parking facilities and areas, including intelligent truck parking as defined by the Directive 2010/40/EU priority action e as well as urban parking as specified in action a.
The formerly used Level B extension will be replaced by a new namespace in the context of version 3.0 of DATEX II.
The publications are intended to support the exchange of informational content from the organisation performing measurements and collecting/eliciting basic data to other organisations providing ITS services or onward information exchange. It is the ambition to harmonise existing information models from different sources such as EasyWay deployment guidelines and truck parking initiatives, and to liaise with the stakeholders involved, especially with the Alliance for Parking Data Standards and CEN/TC 278 working group 3.
Intelligente Verkehrssysteme - Datex II Datenaustauschspezifikationen für Verkehrsmanagement und Verkehrsinformationen - Teil 6: Publikation von Parkinformationen
Systèmes de transport intelligents - Spécifications DATEX II d'échange de données pour la gestion du trafic et l'information routière - Partie 6: Publication de parking
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri upravljanju prometa in informiranju - 6. del: Objave parkirišč
Na podlagi te nove delovne postavke bo izdelan šesti del tehničnih specifikacij DATEX II, ki določa tri publikacije DATEX II v zvezi s parkirišči in profil parkirišč za tovornjake ter podpira izmenjavo statičnih in dinamičnih informacij o parkiriščih in območjih, vključno s pametnim parkiranjem tovornjakov, kot določa prednostni ukrep e direktive 2010/40/EU, in parkiranjem v mestih, kot določa ukrep a.
Prej uporabljena razširitev ravni B bo nadomeščena z novim imenskim prostorom v okviru različice 3.0 specifikacij DATEX II.
Publikacije so namenjene podpori posredovanja informacijskih vsebin od organizacije, ki izvaja meritve in zbira/pridobiva osnovne podatke, k drugim organizacijam, ki zagotavljajo storitve inteligentnih transportnih sistemov ali nadaljnjo izmenjavo informacij. Cilj je uskladitev obstoječih informacijskih modelov iz različnih virov, npr. smernice za uvajanje storitve EasyWay in iniciative Truck Parking, ter povezava z vpletenimi deležniki, zlasti z Združenjem za standarde podatkov o parkiranju in delovno skupino 3 v skladu z določili CEN/TC 278.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16157-6:2022
01-september-2022
Nadomešča:
SIST-TS CEN/TS 16157-6:2016
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri
upravljanju prometa in informiranju - 6. del: Objave parkirišč
Intelligent transport systems - DATEX II data exchange specifications for traffic
management and information - Part 6: Parking publications
Intelligente Verkehrssysteme - Datex II Datenaustauschspezifikationen für
Verkehrsmanagement und Verkehrsinformationen - Teil 6: Publikation von
Parkinformationen
Systèmes de transport intelligents - Spécifications DATEX II d'échange de données pour
la gestion du trafic et l'information routière - Partie 6: Publication de parking
Ta slovenski standard je istoveten z: CEN/TS 16157-6:2022
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST-TS CEN/TS 16157-6:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16157-6:2022
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
August 2022
TECHNISCHE SPEZIFIKATION
ICS 35.240.60 Supersedes CEN/TS 16157-6:2015
English Version
Intelligent transport systems - DATEX II data exchange
specifications for traffic management and information -
Part 6: Parking publications
Systèmes de transport intelligents - Spécifications Intelligente Verkehrssysteme - DATEX II-
DATEX II d'échange de données pour la gestion du Datenaustauschspezifikationen für
trafic et l'information routière - Partie 6: Publication de Verkehrsmanagement und Verkehrsinformationen -
parking Teil 6: Publikation von Parkinformationen
This Technical Specification (CEN/TS) was approved by CEN on 10 July 2022 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16157-6:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 8
4 Symbols and abbreviations . 9
5 Conformance . 9
6 UML notation . 10
7 «D2Namespace» Parking . 10
7.1 Overview . 10
7.2 The Parking Table Publication model . 11
7.2.1 General structure of the model . 11
7.2.2 «D2Package» ParkingTablePublication . 15
7.2.3 «D2Package» PlaceHierarchy . 17
7.2.4 «D2Package» Place . 17
7.2.5 «D2Package» SubplaceElement . 18
7.2.6 «D2Package» IdentifiedArea . 19
7.2.7 «D2Package» Space . 20
7.2.8 «D2Package» OrganisationRole . 21
7.2.9 «D2Package» CommonComponents . 22
7.2.10 «D2Package» OperatingPattern . 25
7.2.11 «D2Package» Assignment . 26
7.2.12 «D2Package» Access . 28
7.2.13 «D2Package» ParkingRoute . 30
7.2.14 «D2Package» ThresholdConfiguration . 31
7.2.15 «D2Package» JunctionAndRoad . 33
7.3 The Parking Status Publication model . 35
7.3.1 Overview . 35
7.3.2 «D2Package» ParkingStatusPublication. 35
7.3.3 «D2Package» SupplyAndDemand . 36
7.3.4 «D2Package» ParkingStatus . 39
7.3.5 «D2Package» VehicleCountAndRate . 42
Annex A (normative) Data Dictionary for «D2Namespace» Parking . 44
A.1 Overview . 44
A.2 Data Dictionary for "Parking Publications" . 45
A.2.1 "Access" package . 45
A.2.2 "Assignment" package . 48
A.2.3 "CommonComponents" package . 50
A.2.4 "IdentifiedArea" package . 56
A.2.5 "JunctionAndRoad" package . 58
A.2.6 "OperatingPattern" package . 60
A.2.7 "OrganisationRole" package . 63
A.2.8 "ParkingRoute" package . 65
A.2.9 "ParkingStatus" package . 67
A.2.10 "ParkingStatusPublication" package . 74
2
---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
A.2.11 "ParkingTablePublication" package . 75
A.2.12 "Place" package . 77
A.2.13 "PlaceHierarchy" package . 78
A.2.14 "Space" package . 80
A.2.15 "SubplaceElement" package . 81
A.2.16 "SupplyAndDemand" package . 82
A.2.17 "ThresholdConfiguration" package . 86
A.2.18 "VehicleCountAndRate" package . 88
A.3 Data Dictionary of <> for "Parking Publications" . 92
A.4 Data Dictionary of <> for "Parking Publications" . 92
A.4.1 Introduction. 92
A.4.2 The <> "AccessEquipmentEnum" . 92
A.4.3 The <> "AccessLaneTypeEnum" . 92
A.4.4 The <> "AccessTypeEnum" . 93
A.4.5 The <> "ActivityEnum" . 93
A.4.6 The <> "CalculationTypeEnum" . 93
A.4.7 The <> "CampusStatusEnum" . 94
A.4.8 The <> "ContactTypeEnum" . 94
A.4.9 The <> "CoveredEnum" . 95
A.4.10 The <> "DirectionEnum" . 95
A.4.11 The <> "ElementDescriptorEnum" . 96
A.4.12 The <> "EsporgStandardLevelEnum" . 97
A.4.13 The <> "HierarchyElementTypeEnum" . 97
A.4.14 The <> "JunctionClassificationEnum" . 98
A.4.15 The <> "LayoutEnum" . 99
A.4.16 The <> "OperatingRestrictionsEnum" . 99
A.4.17 The <> "OperationStatusEnum" . 100
A.4.18 The <> "ParkingConditionsEnum" . 100
A.4.19 The <> "ParkingFaultEnum" . 101
A.4.20 The <> "ParkingModeEnum" . 101
A.4.21 The <> "ParkingOccupancyEnum" . 102
A.4.22 The <> "ParkingOccupancyTrendEnum" . 102
A.4.23 The <> "ParkingPlaceStatusEnum" . 103
A.4.24 The <> "ParkingRouteOrientationEnum" . 103
A.4.25 The <> "ParkingRouteTypeEnum" . 103
A.4.26 The <> "ParkingSafetyEnum" . 104
A.4.27 The <> "ParkingSecurityEnum" . 104
A.4.28 The <> "ParkingSpaceConvenienceEnum" . 105
A.4.29 The <> "ParkingSpaceOccupancyDetectionEnum" . 105
A.4.30 The <> "ParkingStructuralCharacteristicsEnum" . 106
A.4.31 The <> "ParkingSupervisionEnum" . 107
A.4.32 The <> "ParkingUsageScenarioEnum". 107
A.4.33 The <> "ParkingVacantSpacesEnum" . 109
A.4.34 The <> "PedestrianAccessTypeEnum" . 109
A.4.35 The <> "PermitTypeEnum" . 110
A.4.36 The <> "PublicTransportTypeEnum" . 110
A.4.37 The <> "PublicTransportVehicleType". 111
A.4.38 The <> "RegulationEnum" . 111
A.4.39 The <> "ReservationTypeEnum" . 112
A.4.40 The <> "RoadTypeEnum" . 112
A.4.41 The <> "SessionActivationModeEnum" . 113
A.4.42 The <> "SpecialLocationEnum" . 114
A.4.43 The <> "StaffEnum" . 115
3
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
A.4.44 The <> "StructureGradeEnum" . 115
A.4.45 The <> "StructureTypeEnum" . 115
A.4.46 The <> "SupplyViewTypeEnum" . 115
A.4.47 The <> "TruckParkingDynamicManagementEnum" . 116
Annex B (normative) Referenced XML Schema for «D2Namespace» Parking . 117
B.1 Overview . 117
B.2 Schema for PayloadPublication . 117
B.3 Schema for «D2Namespace» Parking . 119
Annex C (informative) Namespace dependencies . 190
Annex D (informative) Overcrowding and Thresholds . 192
Annex E (informative) Specifying Electric charging and Rates/Tariffs . 194
E.1 Overview . 194
E.2 Electric charging . 194
E.3 Rates / Tariffs . 195
Bibliography . 197
4
---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
European foreword
This document (CEN/TS 16157-6:2022) has been prepared by Technical Committee CEN/TC 278
“Intelligent transport systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 16157-6:2015.
EN 16157 series consists several parts under the general title “Intelligent transport systems — DATEX II
data exchange specifications for traffic management and information”. Other parts may be developed in
the future.
In comparison with this previous edition, the specified data model changed significantly due to the
following major modifications:
— Update of the data model to support EN 16157-1:2018 (known as DATEX II, Version 3)
— Integrating the formerly published Level B-Approved extension approach into the core model,
specified by a new namespace "Parking" (see Clause 7).
— Using the core model elements of [4], also known as Alliance for Parking Data Standards (APDS)
model, as base for the new model approach.
EN 16157 series consists of several parts under the general title “Intelligent transport systems — DATEX
II data exchange specifications for traffic management and information”. Other parts may be developed
in the future.
As a user of this document, attention is drawn to the resources of www.datex2.eu. This web site contains
related software tools and software resources that aid the implementation of EN 16157 DATEX II.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
5
---------------------- Page: 7 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
Introduction
This document defines a common set of data exchange specifications to support the vision of a seamless
interoperable exchange of traffic and travel information across boundaries, including national, urban,
interurban, road administrations, infrastructure providers and service providers. Standardisation in this
context is a vital constituent to ensure interoperability, reduction of risk, reduction of the cost base,
promotion of open marketplaces and many social, economic and community benefits to be gained from
more informed travellers, network managers and transport operators.
Delivering European Transport Policy in line with the White Paper issued by the European Commission
requires co-ordination of traffic management and development of seamless pan European services. With
the aim to support sustainable mobility in Europe, the European Commission has been supporting the
development of information exchange mainly between the actors of the road traffic management domain
for a number of years. In the road sector, DATEX II has been long in fruition, with the European
Commission being fundamental to its development through an initial contract and subsequent co-funding
through the Euro-Regional projects. With this standardisation of DATEX II, there is a real basis for
common exchange between the actors of the traffic and travel information sector.
This document includes the framework and context for exchanges, the modelling approach, data content,
data structure and relationships.
This document supports a methodology that is extensible.
The sixth part of the CEN/TS 16157- EN 16157 series (this document) deals with the publication of
parking information. It specifies the structures and definitions of information that may be exchanged to
convey urban parking information or truck parking information.
In normative Annex A, the data dictionary for the «D2Namespace» "Parking" is specified.
In normative Annex B, the referenced XML schema for the «D2Namespace» Parking is specified.
The European Committee for Standardisation (CEN) draws attention to the fact that it is claimed that
compliance with this document may involve the use of a patent concerning procedures, methods and/or
formats given in this document.
CEN takes no position concerning the evidence, validity and scope of patent rights.
6
---------------------- Page: 8 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
1 Scope
This document specifies a publication sub-model supporting the exchange and shared use of data and
information in the field of traffic and travel. It includes the framework and context for exchanges, the
modelling approach, data content, data structure and relationships.
This document is applicable to:
— Traffic and travel information which is of relevance to road networks (non-urban and urban),
— Public transport information that is of direct relevance to the use of a road network (e.g. road link via
train or ferry service),
— Traffic and travel information in the case of Cooperative intelligent transport systems (C-ITS).
This document establishes specifications for data exchange between any two instances of the following
actors:
— Traffic Information Centres (TICs),
— Traffic Control Centres (TCCs),
— Service Providers (SPs),
— Use of this document may be applicable for use by other actors.
This document series covers, at least, the following types of informational content:
— Road traffic event information – planned and unplanned occurrences both on the road network and
in the surrounding environment,
— Operator initiated actions,
— Road traffic measurement data, status data, and travel time data,
— Travel information relevant to road users, including weather and environmental information,
— Road traffic management information and instructions relating to use of the road network.
This part of the CEN/TS 16157 specifies the informational structures, relationships, roles, attributes and
associated data types required for publishing parking information including static content (description
and attribution of parking places and spaces as well as campus information) and dynamic content
(occupancy and vehicle measurement information). It covers urban parking information as well as truck
parking information.
This document specifies a DATEX II Parking namespace, which is part of the DATEX II platform
independent model following EN 16157-1 (published as DATEX II, Version 3.x).
This Part excludes elements that are specified in other parts of the standard series, such as EN 16157-2
(Location referencing), EN 16157-7 (Common data elements) or CEN/TS 16157-12 (Facilities
publications).
7
---------------------- Page: 9 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 16157-1:2018, Intelligent transport systems — DATEX II data exchange specifications for traffic
management and information – Part 1: Context and framework
EN 16157-2:2019, Intelligent transport systems — DATEX II data exchange specifications for traffic
management and information – Part 2: Location referencing
EN 16157-7:2018, Intelligent transport systems — DATEX II data exchange specifications for traffic
management and information – Part 7: Common data elements
CEN/TS 16157-12:2022, Intelligent transport systems — DATEX II data exchange specifications for traffic
management and information – Part 12: Facilities publications
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 16157-1, EN 16157-2,
EN 16157-7 and the following apply.
3.1
campus
large facility (such as a university campus, or an airport), or a large geographic zone (such as a city or a
town), which can contain numerous places that can be logically reported together
3.2
dynamic part [of the parking publications model]
Parking Status Publication model based on a ParkingStatusPublication class
3.3
EU truck parking regulation
short form for the “COMMISSION DELEGATED REGULATION (EU) No 885/2013 of 15 May 2013
supplementing ITS Directive 2010/40/EU of the European Parliament and of the Council with regard to
the provision of information services for safe and secure parking places for trucks and commercial
vehicles” [1]
3.4
hierarchy element general
generalised component of a place hierarchy that forms one element in the tree-like hierarchy
3.5
identifiedArea
identifiable discrete bounded geographic zone that shares common characteristics and is used for
parking and mobility related operations or other purposes
3.6
parking publications model
entirety of the Parking Table Publication model and the Parking Status Publication model
8
---------------------- Page: 10 ----------------------
SIST-TS CEN/TS 16157-6:2022
CEN/TS 16157-6:2022 (E)
3.7
place
place or location used for parking, loading, unloading, standing, or some other mobility or transport
related activity
3.8
place hierarchy
method to build a hierarchy of place records, in on-street, off-street, and zone environments
Note 1 to entry: Zone environments as specified in this document.
3.9
space
single space for parking or other mobility related purposes, usually designed for one vehicle, which may,
but not necessarily, be denoted by painted or other road surface marker
3.10
static part [of the parking publications model]
Parking Table Publication model based on
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.