Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges

This document specifies the dimensions of polymeric O-Ring gaskets for use with grooved flanges complying with EN 1092 for PN 10, PN 16, PN 25, PN 40.
NOTE 1   Dimensions of other types of gaskets for use with flanges to EN 1092 1, EN 1092 2, EN 1092 3 and EN 1092 4 are given in EN 1514 1, EN 1514 2, EN 1514 3, EN 1514 4, EN 1514-6 and EN 1514-7
NOTE 2   Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

Flansche und ihre Verbindungen - Maße für Dichtungen für Flansche mit PN-Bezeichnung - Teil 8: Runddichtringe aus Gummi für Nutflansche

Diese Europäische Norm legt die Maße von Runddichtringe aus Gummi für Nutflansche nach EN 1092 für PN 10, PN 16, PN 25 und PN 40 fest.
ANMERKUNG 1      Die Maße für andere Dichtungsformen für Flansche nach EN 1092-1, EN 1092-2, EN 1092-3 und EN 1092 4 sind in EN 1514-1, EN 1514-2, EN 1514-3, EN 1514-4, prEN 1514-6 und prEN 1514-7 enthalten.
ANMERKUNG 2      Anhang A enthält Angaben, die der Anwender bei der Bestellung von Dichtungen machen sollte, wenn die Auswahl der für den Anwendungsfall geeigneten Dichtungswerkstoffe dem Lieferer überlassen bleibt.

Brides et leurs assemblages - Dimensions des joints pour les brides désignées PN - Partie 8 : Joints d'étanchéité toriques en caoutchouc pour brides a rainures

Le présent document prescrit les dimensions des joints d'étanchéité toriques en caoutchouc pour utilisation avec des brides a rainures conformes a l'EN 1092 pour PN 10, PN 16, PN 25 et PN 40.
NOTE 1   Les dimensions des autres types de joints utilisés avec des brides conformes aux EN 1092-1, EN 1092-2, EN 1092 3 et EN 1092-4 sont données dans les EN 1514-1, EN 1514-2, EN 1514-3, EN 1514-4, EN 1514-6 et EN 1514-7.
NOTE  2   L'Annexe A liste les informations que l'acheteur peut fournir lors de sa commande de joints lorsque le choix des matériaux de joint appropriés a l'utilisation est laissé au fournisseur.

Prirobnice in prirobnični spoji - Mere tesnil za prirobnice z oznako PN - 8. del: Polimerna O-tesnila za prirobnice z utorom

General Information

Status
Published
Publication Date
31-Dec-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2005
Due Date
01-Jan-2005
Completion Date
01-Jan-2005

Buy Standard

Standard
SIST EN 1514-8:2005
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flansche und ihre Verbindungen - Maße für Dichtungen für Flansche mit PN-Bezeichnung - Teil 8: Runddichtringe aus Gummi für NutflanscheBrides et leurs assemblages - Dimensions des joints pour les brides désignées PN - Partie 8 : Joints d'étanchéité toriques en caoutchouc pour brides a rainuresFlanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges23.040.80Tesnila za cevne zvezeSeals for pipe and hose assemblies23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 1514-8:2004SIST EN 1514-8:2005en01-januar-2005SIST EN 1514-8:2005SLOVENSKI

STANDARD
SIST EN 1514-8:2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1514-8November 2004ICS 23.040.80English versionFlanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets forgrooved flangesBrides et leurs assemblages - Dimensions des joints pourles brides désignées PN - Partie 8 : Joints d'étanchéitétoriques en caoutchouc pour brides à rainuresFlansche und ihre Verbindungen - Maße für Dichtungen fürFlansche mit PN-Bezeichnung - Teil 8: Runddichtringe ausGummi für NutflanscheThis European Standard was approved by CEN on 23 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1514-8:2004: ESIST EN 1514-8:2005

EN 1514-8:2004 (E) 2 Contents Page Foreword......................................................................................................................................................................3 1 Scope..............................................................................................................................................................4 2 Normative references....................................................................................................................................4 3 Terms and definitions...................................................................................................................................4 4 Designations..................................................................................................................................................5 5 Dimensions.....................................................................................................................................................6 6 Packaging.......................................................................................................................................................6 Annex A (informative)

Information to be supplied by the purchaser...................................................................7

SIST EN 1514-8:2005

EN 1514-8:2004 (E) 3 Foreword This document (EN 1514-8:2004) has been prepared by Technical Committee CEN/TC 74 “Flanges and their joints”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. EN 1514 "Flanges and their joints – Dimensions of gaskets for PN designated flanges", consists of the following parts:  Part 1: Non-metallic flat gaskets with or without inserts;  Part 2: Spiral wound gaskets for use with steel flanges;  Part 3: Non-metallic PTFE envelope gaskets;  Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges;  Part 6: Covered Serrated Metal gaskets for use with steel flanges;  Part 7: Covered metal jacketed gaskets for use with steel flanges;  Part 8: Polymeric O-Ring gaskets for grooved flanges. According to the CEN/CENELEC Internal Regulations, the natio

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.