oSIST prEN IEC 62841-3-17:2025/oprAA:2025

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-17: Particular requirements for transportable table masonry saws

Outils électroportatifs à moteur, outils portables et machines pour jardin et pelouses - Sécurité - Partie 3-17: Exigences particulières pour les scies circulaires à table de maçonnerie transportables

Električna motorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-17. del: Posebne zahteve za premične namizne zidarske žage - Dopolnilo AA

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Dec-2025
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 23-Oct-2025
• Due Date: 12-Mar-2026
• Directive: 2023/1230 - Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery and repealing Directive 2006/42/EC of the European Parliament and of the Council and Council Directive 73/361/EEC (Text with EEA relevance)
• Mandate: M/605 - COMMISSION IMPLEMENTING DECISION of 20.1.2025 on a standardisation request to the European Committee for Standardization and to the European Committee for Electrotechnical Standardization as regards machinery and related products in support of Regulation (EU) 2023/1230 of the European Parliament and of the Council
• Ref Project: prEN IEC 62841-3-17:2025/prAA:2025 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-17: Particular requirements for transportable table masonry saws

Relations

• Amends: oSIST prEN IEC 62841-3-17:2025 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-17: Particular requirements for transportable table masonry saws
• Effective Date: 27-May-2025

Overview

prEN IEC 62841-3-17:2025/prAA:2025 is a CLC draft amendment addressing safety requirements for transportable table masonry saws. Published as a prAA (draft amendment) to prEN IEC 62841-3-17:2025 by CLC/TC 116, it updates the Part 3-17 document that supplements EN 62841-1:2015 (general requirements for electric motor‑operated tools). This draft amendment, if approved, will be incorporated into the European standard series for electric hand‑held, transportable tools and lawn & garden machinery, providing a harmonized approach to machine safety, noise/vibration measurement and regulatory alignment with EU machinery rules.

Key Topics and Requirements

• Transportable table masonry saws - particular safety rules: Part 3-17 supplements EN 62841-1:2015 to address hazards unique to portable table saws used for masonry.
• Supply connection and flexible cables: Modification to Clause 24 clarifies cable classes. For most table masonry saws the supply cord shall be at least heavy polychloroprene (H07RN-F / H07BQ-F); for type 4 table masonry saws ordinary polychloroprene (H05RN-F / H05BQ-F) is permitted. Compliance is checked by inspection.
• Noise and vibration measurement: Annex I title and normative status updated - measurement of noise and vibration emissions is treated normatively.
• Normative cross‑references: Addition of Annex ZA lists international publications and corresponding European standards that are normative for this amendment.
• Regulatory relationship: Informative Annex ZZB maps this amendment to essential requirements of Regulation (EU) 2023/1230 (machinery) and explains the presumption of conformity when cited in the Official Journal.
• Risk areas explicitly referenced: ergonomics, control systems, starting/stopping, stability, breaking up during operation, ejected objects, moving parts, electrical supply, extreme temperatures, external radiation, and instructions for use (as listed in Annex ZZB correspondence).

Applications and Who Uses It

• Manufacturers of transportable table masonry saws and power tool OEMs - to design and certify products that meet EU safety expectations.
• Test laboratories and conformity assessment bodies - to perform inspections, noise/vibration testing and cable compliance checks.
• Product safety engineers and compliance officers - to prepare technical files, instructions for use and risk assessments aligned with EN IEC 62841 series.
• Importers, distributors and notified bodies - for market surveillance and demonstrating conformity with Regulation (EU) 2023/1230.

Related Standards

• EN 62841-1:2015 (General requirements for electric motor‑operated tools)
• IEC 62841 series (international equivalents)
• IEC 60335-2-41 / EN IEC 60335-2-41 (referenced in Annex ZA)
• EN 1339 (concrete paving flags - referenced)

This draft amendment refines safety, testing and regulatory alignment specifically for transportable table masonry saws, helping stakeholders ensure safer designs and smoother conformity with EU machinery legislation.

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2025
Električna motorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost
- 3-17. del: Posebne zahteve za premične namizne zidarske žage - Dopolnilo AA
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-17: Particular requirements for transportable table masonry
saws
Outils électroportatifs à moteur, outils portables et machines pour jardin et pelouses -
Sécurité - Partie 3-17: Exigences particulières pour les scies circulaires à table de
maçonnerie transportables
Ta slovenski standard je istoveten z: prEN IEC 62841-3-17:2025/prAA:2025
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 Električna orodja Electric tools
oSIST prEN IEC 62841-3- en
17:2025/oprAA:2025
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 62841-3-17:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2025
ICS  -
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-17: Particular
requirements for transportable table masonry saws
Outils électroportatifs à moteur, outils portables et machines To be completed
pour jardin et pelouses - Sécurité - Partie 3-17: Exigences
particulières pour les scies circulaires à table de
maçonnerie transportables
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 62841-3-17:2025; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-01-09.

It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 82031 Ref. No. prEN IEC 62841-3-17:2025/prAA:2025 E

1 Contents Page
2 European foreword . 3
3 1 Modification to Clause 24, “Supply connection and external flexible cables and cords” . 5
4 2 Modification to Annex I, “Measurement of noise and vibration emissions” . 5
5 3 Addition of Annex ZA, “Normative references to international publications with their
6 corresponding European publications” . 5
7 4 Addition of Annex ZZB, “Relationship between this European Standard and the essential
8 requirements of Regulation (EU) 2023/1230 aimed to be covered” . 6
9 Annex ZZB (informative) Relationship between this European Standard and the essential
10 requirements of Regulation (EU) 2023/1230 to be covered . 7
11 European foreword
12 This document (prEN IEC 62841-3-17:2025/prAA:2025) has been prepared by CLC/TC 116 “Safety and
13 environmental aspects of motor-operated electric tools”.
14 This document is currently submitted to the Enquiry.
15 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 48 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
16 This document modifies by common modifications prEN IEC 62841-3-17:2025, which consists of the text of
17 116/896/CDV (future IEC 62841-3-17, Ed. 1) prepared by IEC/TC 116 “Safety of motor-operated electric tools”.
18 If approved, this draft amendment will be published as EN IEC 62841-3-17:202x/A11:202x.
19 This series is divided into four parts.
20 Part 1: General requirements which are common to most hand-held electric motor operated tools (for the
21 purpose of this document referred to simply as tools) which could come within the scope of this document;
22 Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements
23 given in Part 1 to account for the particular hazards and characteristics of these specific tools.
24 The Part 3-17 is used in conjunction with EN 62841-1:2015 and all of its amendments and corrigenda (if any).
25 Part 3-17 supplements or modifies the corresponding clauses in EN 62841-1:2015 and all of its amendments
26 and corrigenda (if any), so as to convert it into the European Standard: Particular requirements for transportable
27 table masonry saws.
28 Where a particular subclause of Part 1 is not mentioned in the Part 3-17, that subclause applies. When this
29 document states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted
30 accordingly.
31 The following print types are used:
32 — requirements; in roman type;
33 — test specifications: in italic type;
34 — notes: in smaller roman type.
35 The terms defined in Clause 3 are printed in bold typeface.
36 Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101.
...