iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 9300-003:2024

(Main)

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts

This document specifies the fundamentals and concepts for the long-term preservation of digital product and technical data. EN 9300 is a series of separate standard parts that elucidate various regulatory and business requirements, applicable domain specific methodologies and are extensible for future long-term archiving formats and data management practices.
EN 9300-003 will focus on the fundamentals and concepts of long-term archival and retrieval of digital product and technical data.

Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten - Teil 003: Grundlagen and Konzepte

Série aérospatiale - LOTAR - Archivage long terme et récupération des données techniques produits numériques telles que CAO, 3D et PDM - Partie 003 : Fondamentaux et concepts

Aeronavtika - LOTAR - Dolgotrajno arhiviranje in iskanje digitalne tehnične dokumentacije o izdelkih, kot so podatki o 3D, CAD in PDM - 003. del: Osnove in pojmi

General Information

Status
Not Published
Public Enquiry End Date
29-Jun-2024
ICS
01.110 - Technical product documentation
35.240.30 - IT applications in information, documentation and publishing
49.020 - Aircraft and space vehicles in general
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
07-May-2024
Due Date
24-Sep-2024
Ref Project
prEN 9300-003 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts

Relations

Revises
SIST EN 9300-003:2014 - Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts
Effective Date
17-Jan-2024

Buy Standard

prEN 9300-003:2024 - BARVEprEN 9300-003:2024 - BARVE
PreviousNext
Draft
prEN 9300-003:2024 - BARVE
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 9300-003:2024
01-junij-2024
Aeronavtika - LOTAR - Dolgotrajno arhiviranje in iskanje digitalne tehnične
dokumentacije o izdelkih, kot so podatki o 3D, CAD in PDM - 003. del: Osnove in
pojmi
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and
concepts
Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler
technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten -
Teil 003: Grundlagen and Konzepte
Série aérospatiale - LOTAR - Archivage long terme et récupération des données
techniques produits numériques telles que CAO, 3D et PDM - Partie 003 :
Fondamentaux et concepts
Ta slovenski standard je istoveten z: prEN 9300-003
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
oSIST prEN 9300-003:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 9300-003:2024

---------------------- Page: 2 ----------------------
oSIST prEN 9300-003:2024


DRAFT
EUROPEAN STANDARD
prEN 9300-003
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2024
ICS 01.110; 35.240.30; 49.020 Will supersede EN 9300-003:2012
English Version

Aerospace series - LOTAR - LOng Term Archiving and
Retrieval of digital technical product documentation such
as 3D, CAD and PDM data - Part 003: Fundamentals and
concepts
Série aérospatiale - LOTAR - Archivage long terme et Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung
récupération des données techniques produits und -Bereitstellung digitaler technischer
numériques telles que CAO, 3D et PDM - Partie 003 : Produktdokumentationen, wie zum Beispiel von 3D-,
Fondamentaux et concepts CAD- und PDM-Daten - Teil 003: Grundlagen and
Konzepte
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 9300-003:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 9300-003:2024
prEN 9300-003:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Applicability .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 9300-120:2024(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 120: CAD 3D explicit geometry with graphic product and manufacturing information
EN 9300-120:2023

1.1 Introduction
This document defines the requirements for the long term digital preservation of the presentation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of single CAD parts. The goal is to preserve this 3D information with respect to the geometry and related PMI produced by the original CAD system, following the principles laid down in EN 9300 003 “Fundamentals and Concepts”.
The requirements of EN 9300 110 “CAD mechanical 3D explicit geometry information” about the preservation of the 3D explicit shape shall apply within this document.
The meaning of terms "Presentation" and "Representation", defined in the EN 9300 100 “Common concepts for Long term archiving and retrieval of CAD 3D mechanical information” is required to understand this EN 9300 document.
1.2 In scope
The following outlines the total scope of this document:
- the Presentation of 3D geometrical dimension and tolerance, and 3D annotation attributes;
- their possible semantic links with 3D Geometric shape;
- User Defined Attributes: that are assigned to 3D geometric entities or at the part level.
For the purpose of this document, the semantic definition is at the level that supports associative “Cross-highlighting”, to illustrate the portion of the geometry to which a PMI element applies.
In this version, the technology used to preserve this 3D information is based on polyline and tessellated presentation. Polyline presentation is a conversion to lines and curves of all 3D annotations by the STEP interfaces of the CAD system, including validation properties.  Tessellated presentation is a conversion to tessellated curves and tessellated faces. The main use cases are the Certification and Product Liability of static information, however, re-use is also possible after the deletion of previous PMI and creation of new PMI (refer to clause 3 for definition).
1.3 Out of scope
The following is outside the scope:
- machine-interpretable PMI “Representation”;
- how to preserve additional information:
- - property rights;
- -form features;
- -machining features;
- CAD Assemblies.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-121:2024(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 121: Semantic representation of CAD 3D Explicit Geometry with Product and Manufacturing Information
EN 9300-121:2023

1.1 Introduction
This document defines the requirements for the long term digital preservation of the Semantic Representation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of single CAD parts. The goal is to preserve this 3D information, without loss, with respect to the geometry produced by the original CAD system, following the principles laid down in EN 9300 003 “Fundamentals and Concepts”.
The requirements of EN 9300 110 concerning the preservation of the 3D explicit shape shall apply within this Part.
The term “semantic representation” is defined in Clause 3 “Terms, definitions and abbreviations”.
1.2 In scope
The following outlines the total scope of EN 9300 121:
- machine-interpretable PMI “Semantic Representation” (Refer to clause 3 for definition);
- the association of the above with 3D geometric shapes;
- the possible association of the above with Presentation of 3D Product and Manufacturing Information (PMI), and 3D annotations as defined in EN 9300 120.
In EN 9300 121, the technology used to preserve this 3D information is based on semantic representation. The main use cases are Certification, Product Liability and Design re-use.
For the purpose of this document, the semantic definition is at the level that supports associative “Cross-highlighting” for the purpose of human readability.
1.3 Out of scope
The following is outside the scope:
- PMI presentation (defined in EN 9300 120);
- User defined attributes that are assigned to 3D geometric entities or at the part level. The archiving of the UDA is defined in EN 9300 120.
- How to preserve additional information:
- - property rights;
- - form features;
- - CAD Assemblies.
- The semantics of special Notes outside the scope of PMI: ITAR/EAR, proprietary, and title block information, etc.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-125:2024(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 125: Explicit CAD assembly structure with Graphic Product and Manufacturing Information (PMI)
EN 9300-125:2023

1.1 Introduction
This document defines the requirements for the long-term digital preservation of the presentation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of CAD assembly structure. The goal is to preserve this 3D information, without loss, with respect to the geometry produced by the original CAD system, following the principles laid down in EN 9300 003 “Fundamentals and Concepts”.
This will allow the retrieval of the assembly structure including the placement information.
This standard extends EN 9300-115 “Explicit CAD Assembly Structure” by including assembly level PMI.
PMI for the assembly structure can be recorded in the same file as the geometry, can be in a nested assembly structure or the PMI will be contained in its own separate file (Side-Car).
The PMI elements shall be presented on the graphic level only (i.e. polyline, tessellated).
1.2 Out of scope
The following is outside the scope:
- The archiving of assembly Form Features.
- Semantic PMI representation is out of scope for this document.
- The geometry defined at assembly level is out of scope for this document.
(This document covers PMI at the assembly level only.)

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-100:2018(Main)
Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical information
EN 9300-100:2018

This European Standard defines common fundamental concepts for Long Term Archiving and Retrieval
of CAD mechanical information for elementary parts and assemblies. It details the “fundamentals and
concepts” of EN 9300-003 in the specific context of Long Term Archiving of CAD mechanical models.
CAD mechanical information is divided into assembly structure and geometrical information, both
including explicit and implicit geometrical representation, Geometric Dimensioning and Tolerancing
with Form Features.
The EN 9300-1XX family is organized as a sequence of parts, each building on the previous in a
consistent way, each adding a level of complexity in the CAD data model. This includes the detailing of
relationships between the essential information for the different types of CAD information covered by the
EN 9300-1XX family.
As technology matures additional parts will be released in order to support new requirements within
the aerospace community.
The present part describes:
— the fundamentals and concepts for Long Term Archiving and Retrieval of CAD 3D mechanical
information;
— the document structure of the EN 9300-1XX family, and the links between all these parts;
— the qualification methods for long term preservation of archived CAD mechanical information;
more specially, principles for the CAD validation properties and for verification of the quality of the
CAD archived file;
— specifications for the preservation planning of archived CAD information;
— specific functions for administration and monitoring of CAD archived mechanical models;
— the definition of Archive Information Packages for CAD data.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-115:2018(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 115: Explicit CAD assembly structure
EN 9300-115:2018

EN 9300-010 provides an overview description for the recommended processes for archiving of 3D product data, e.g. 3D CAD and PDM data. The processes are described in EN 9300-011 to EN 9300-016.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-002:2018(Main)
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 002: Requirements
EN 9300-002:2018

This document is a part of the EN 9300 Series. This document addresses requirements for the long term
archiving of digital product information, applicable to the international aerospace industry.
Data shall be available to meet regulatory, legal, contractual and business requirements.
Initially, this document sums up the main business requirements for long term archiving of digital
product data. Although these requirements are not in themselves normative, when making data
available over an extended period, it is a fundamental principle that the contextual data needed to
interpret the data is also available.
This document uses the OAIS reference model to provide comparability with other approaches to
keeping information available. However, OAIS is a standard reference model for comparison, not a
standard for implementation. Consequently, this document defines requirements for processes (and
associated technologies) intended to make data available for the life of a product, and does so in terms
of the OAIS model.
In dealing with traditional media, the differences between substantial change and unimportant
“surface” change are generally self-evident. For example, the yellowing of paper over time, or the
encrustation of a gravestone with lichen do not lose the information contained, whereas the loss of
pages of a document, or the erosion of the stone do so, and archiving focusses on the preservation of the
medium. For digital product data, the medium is unimportant, but the content can be corrupted. The
subject of the (many) remaining parts of this standard is the identification of the information that shall
be uncorrupted if digital product data is to be usable in the future, and the consequent refinement of
processes and procedures to insure this.
This document addresses, archiving of digital product data required for product definition, such as in
three-dimensional representations a tolerances, material properties, manufacturing data, etc.
specification call-outs, product structure and configuration control data, etc. Other parts of the EN 9300
standards will cover more specifically the long term archiving of, for example, composites, electrical
systems, product analyses and product simulation information.
This document also addresses managing the evolution of technologies required to ensure the
availability and usability of the data for the required archiving period.
This document is not intended to incorporate company specific requirements and does not dictate
specific organizational structures within a company. This document does not specify a design or an
implementation of an archive system. Actual implementations may distribute responsibilities or break
out functionality differently.
This document assumes that all requirements for configuration management of the product data are in
place and therefore are not specifically described in this document.
If an organization chooses to implement requirements beyond those outlined in this requirements
document, those additional requirements shall not conflict or negatively impact the requirements
contained in this document.
Purpose:
This document establishes legal and other business requirements for processes intended to preserve
digital data. Data needs to be stored and maintained so that data is retrievable and usable for the
required archiving period. In addition, for some business requirements, data needs to be authentically
preserved and accessed.
This standard is intended to allow for different implementations based on a company’s specific business
environment.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-110:2018(Main)
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 110: CAD mechanical 3D Explicit geometry information
EN 9300-110:2018

This document defines the requirements on a digital archive to preserve for the long term the 3D
explicit geometry of single CAD parts. The goal is to preserve the 3D information without loss with
respect to the geometry produced by the original CAD system, following the principles laid down in
EN 9300-003 “Fundamentals and Concepts”, including the use of an open data format.
1.2 In scope
The following is in scope of this part of EN 9300:
— business specification for long term archiving and retrieval of CAD 3D explicit geometry
(see Clause 5);
— essential information of CAD 3D explicit geometry (solids, curves, surfaces, and points) to be
preserved (see Clause 6);
— data structures detailing the main fundamentals and concepts of CAD 3D explicit geometry
(see Clause 7);
— verification rules to check CAD 3D explicit geometry for consistency and data quality (see Clause 8);
— validation rules to be stored with the CAD 3D explicit geometry in the archive to check essential
characteristics after retrieval (see Clause 9).
NOTE This includes the geometrical external shape resulting from CAD disciplines 3D entities (e.g., 3D
Structural components, 3D Tubing, 3D electrical harness, 3D composite, etc.).

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-010:2018(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 010: Overview Data Flow
EN 9300-010:2018

EN 9300-010 provides an overview description for the recommended processes for archiving of 3D product data, e.g. 3D CAD and PDM data. The processes are described in EN 9300-011 to EN 9300-016.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-200:2018(Main)
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 200: Common Concepts for Long term Archiving and Retrieval of Product Structure Information
EN 9300-200:2018

In most modern industrial environments, product data is maintained and managed using product data
management (PDM) systems. In general, these systems:
— Manage the use of the primary technical data contained, for example, in CAD models and
documents;
— Allow organization of primary technical data into structures to represent the relevant products;
— Support definition and maintenance processes for products.
Within the EN 9300 context, several domain specific parts address LTA&R for the primary technical
data (e.g. CAD, CAx, Documents) as generated by the relevant technical “authoring” systems. The
EN 9300-2xx series provides information for LTA&R of product management data for the relevant
documents, structures and processes.
NOTE The terms “PDM data” and “product management data” are synonymous.
This is illustrated in the Figure below.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-007:2017(Main)
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References
EN 9300-007:2017

This document defines the common terms, abbreviations and references used through the EN 9300
series of standard parts.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day