SIST EN ISO 4126-5:2013/A1:2016
(Amendment)Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013/Amd 1:2016)
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013/Amd 1:2016)
Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 5: Gesteuerte Sicherheitsventile (CSPRS) (ISO 4126-5:2013/Amd 1:2016)
Dispositifs de sécurité pour protection contre les pressions excessives - Partie 5: Dispositifs de sécurité asservis (CSPRS) (ISO 4126-5:2013/Amd 1:2016)
Naprave za varovanje pred visokim tlakom - 5. del: Krmiljeni varnostni sistemi za sproščanje tlaka (CSPRS) - Dopolnilo A1 (ISO 4126-5:2013/Amd 1:2016)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4126-5:2013/A1:2016
01-september-2016
1DSUDYH]DYDURYDQMHSUHGYLVRNLPWODNRPGHO.UPLOMHQLYDUQRVWQLVLVWHPL]D
VSURãþDQMHWODND&6356'RSROQLOR$,62$PG
Safety devices for protection against excessive pressure - Part 5: Controlled safety
pressure relief systems (CSPRS) (ISO 4126-5:2013/Amd 1:2016)
Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 5: Gesteuerte
Sicherheitsventile (CSPRS) (ISO 4126-5:2013/Amd 1:2016)
Dispositifs de sécurité pour protection contre les pressions excessives - Partie 5:
Dispositifs de sécurité asservis (CSPRS) (ISO 4126-5:2013/Amd 1:2016)
Ta slovenski standard je istoveten z: EN ISO 4126-5:2013/A1:2016
ICS:
13.240 Varstvo pred previsokim Protection against excessive
tlakom pressure
SIST EN ISO 4126-5:2013/A1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4126-5:2013/A1:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 4126-5:2013/A1:2016
EN ISO 4126-5:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2016
EUROPÄISCHE NORM
ICS 13.240
English Version
Safety devices for protection against excessive pressure -
Part 5: Controlled safety pressure relief systems (CSPRS) -
Amendment 1 (ISO 4126-5:2013/Amd 1:2016)
Dispositifs de sécurité pour protection contre les Sicherheitseinrichtungen gegen unzulässigen
pressions excessives - Partie 5: Dispositifs de sécurité Überdruck - Teil 5: Gesteuerte Sicherheitsventile
asservis (CSPRS) - Amendement 1 (ISO 4126- (CSPRS) - Änderung 1 (ISO 4126-5:2013/Amd 1:2016)
5:2013/Amd 1:2016)
This amendment A1 modifies the European Standard EN ISO 4126-5:2013; it was approved by CEN on 19 May 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4126-5:2013/A1:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4126-5:2013/A1:2016
EN ISO 4126-5:2013/A1:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4126-5:2013/A1:2016
EN ISO 4126-5:2013/A1:2016 (E)
European foreword
This document (EN ISO 4126-5:2013/A1:2016) has been prepared by Technical Committee ISO/TC 185
"Safety devices for protection against excessive pressure" in collaboration with Technical Committee
CEN/TC 69 “Industrial valves” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 4126-5:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2016,
and conflicting national standards shall be withdrawn at the latest by December 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive, see informative Annex ZA, which is an integral part of
EN ISO 4126-5:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.