Metallic industrial piping - Part 1: General

This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation.
This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure.
This European Standard is not applicable to:
-   Pipelines and their accessories;
-   Stream waterways such as penstocks, pressure tunnels, pressure shaft for hydro-electric-installations and their related specific accessories;
-   Piping for vehicles covered by the EEC type approval procedures as laid down in Directives 70/156/EEC [1], 74/150/EEC [2] and 92/61/EEC [3];
-   Items specifically designed for nuclear use, failure of which may cause an emission of radioactivity;
-   Well-control equipment used in the petroleum, gas or geothermal exploration and extraction industry and in underground storage which is intended to contain and/or control well pressure, including the piping;
-   Piping of blast furnaces including the furnace cooling, hot blast recuperators, dust extractors and blast furnace exhaust gas scrubbers and direct reducing cupolas including the furnace cooling, gas converters and vacuum furnaces and pans for melting, re-melting de-gassing and casting of steel and non ferrous metals;
-   Enclosures for high voltage electrical equipment such as switchgear, control gear and transformers;
-   Pressurized pipes for the containment of transmission systems such as for electrical power and telephone cables;
-   Permanently fixed piping for ships, rockets, aircraft and mobile offshore units;
-   Internal piping in medical devices as defined in the Directive 93/142/EEC [4] concerning medical devices;
-   Internal piping of boilers and piping integral to pressure vessels.

Metallische industrielle Rohrleitungen - Teil 1: Allgemeines

Diese Europäische Norm legt die Anforderungen fest für industrielle Rohrleitungssysteme und deren Halterungen, einschließlich Sicherheitseinrichtungen, aus metallischen Werkstoffen, mit dem Ziel, sichere Betriebsbedingungen zu erreichen.
Diese Europäische Norm gilt für oberirdische oder in Kanälen verlegte oder erdgedeckte Rohrleitungen aus metallischen Werkstoffen, unabhängig vom Druck.
Diese Europäische Norm gilt nicht für:
-   Rohrfernleitungen und deren Zubehörteile;
-   Triebwasserwege in Wasserkraftanlagen wie Druckrohre, Druckstollen und -schächte sowie die entsprechenden Ausrüstungsteile;
-   Rohrleitungen für Geräte oder Fahrzeuge, die den Betriebserlaubnisbestimmungen entsprechend den Richt¬linien 70/156/EWG [1], 74/150/EWG [2] und 92/61/EWG [3] unterliegen;
-   Geräte, die speziell zur Verwendung in kerntechnischen Anlagen entwickelt wurden und deren Ausfall zu einer Freisetzung von Radioaktivität führen kann;
-   Bohrlochkontrollgeräte, die für die industrielle Exploration und Gewinnung von Erdöl, Erdgas und Erdwärme sowie für Untertagespeicher verwendet werden und dazu bestimmt sind, den Bohrlochdruck zu halten und/oder zu regeln. Hierzu zählt die Rohrleitung;
-   Rohrleitungen von Hochöfen mit Ofenkühlung, Rekuperativ-Winderhitzern, Staubabscheidern und Gichtgasreinigungsanlagen, Direktreduktionsschachtöfen mit Ofenkühlung, Gasumsetzung und Vakuum¬öfen, Pfannen zum Schmelzen, Umschmelzen, Entgasen und Vergießen von Stahl und Nichteisen¬metallen;
-   Gehäuse für elektrische Hochspannungsbetriebsmittel wie Schaltgeräte, Steuer- und Regelgeräte sowie Transformatoren;
-   unter Druck stehende Rohre für die Ummantelung von Komponenten von Übertragungssystemen wie z. B. Elektro- und Telefonkabel;
-   fest eingebaute Rohrleitungen in Schiffen, Raketen, Luftfahrzeugen oder beweglichen Offshore-Anlagen;
-   Rohrleitungen in Medizinprodukten gemäß der Richtlinie 93/42/EWG über Medizinprodukte;
-   innenliegende Rohrleitungen von Kesseln und Rohrleitungen, die Bestandteil von Druckbehältern sind.

Tuyauteries industrielles métalliques - Partie 1: Généralités

La présente Norme européenne définit les exigences relatives aux réseaux de tuyauteries industrielles et aux supports, systèmes de sécurité inclus, en matériaux métalliques dans le but d’assurer une exploitation sûre.
La présente Norme européenne est applicable aux tuyauteries métalliques aériennes, en caniveaux ou enterrées, indépendamment de la pression.
La présente Norme européenne ne s’applique pas :
-   aux canalisations de transport ni à leurs accessoires ;
-   aux réseaux d'eau tels que les conduites forcées, les galeries sous pression, les cheminées d'équilibrage des installations hydroélectriques et aux accessoires spécifiques connexes ;
-   aux tuyauteries pour véhicules visés par les procédures de réception CEE telles que définies dans les directives 70/156/CEE [1], 74/150/CEE [2] et 92/61/CEE [3] ;
-   aux équipements spécialement conçus pour les applications nucléaires, dont la défaillance peut donner lieu à des émissions radioactives ;
-   aux équipements de contrôle de puits utilisés dans l'industrie de prospection et d'exploitation pétrolière, gazière ou géothermique ainsi que dans le stockage souterrain et prévus pour contenir et/ou contrôler la pression du puits, y compris la tuyauterie ;
-   aux tuyauteries dans les hauts-fourneaux, y compris leurs systèmes de refroidissement, leurs récupérateurs de vent chaud, leurs extracteurs de poussières et leurs épurateurs de gaz de hauts-fourneaux, dans les fours à réduction directe, y compris leurs systèmes de refroidissement, leurs convertisseurs à gaz, dans les fours sous vide ainsi que dans les cuves destinées à la fusion, à la refusion, au dégazage et à la coulée de l’acier et des métaux non ferreux ;
-   aux enveloppes des équipements électriques à haute tension tels que les appareillages de connexion et de commande, les transformateurs et les machines tournantes ;
-   aux tuyaux sous pression entourant les éléments de réseaux de transmission, tels que les câbles électriques ou les câbles téléphoniques ;
-   aux tuyauteries fixées de manière permanente sur les bateaux, fusées, aéronefs et unités mobiles off-shore ;
-   aux tuyauteries internes des dispositifs médicaux tels que définis dans la directive 93/142/CEE [4] relative aux dispositifs médicaux ;
-   aux tuyauteries internes des chaudières et aux tuyauteries faisant partie intégrante des récipients sous pression.

Kovinski industrijski cevovodi - 1. del: Splošno

Ta evropski standard določa zahteve za industrijske cevne sisteme in nosilce, vključno z varnostnimi sistemi, iz kovinskih materialov za zagotavljanje varnega obratovanja.
Ta evropski standard se uporablja za nadzemne kovinske cevi, cevi v kanalih ali vkopane cevi, ne glede na tlak.
Ta evropski standard se ne uporablja za:
–   cevovode in njihov pribor;
–   visokopretočne vodne poti, kot so dovodni kanali, tlačni predori, tlačni jaški za hidroelektrične napeljave in z njimi povezane posebne armature;
–   cevovode za vozila, ki so zajeti v postopkih EGS-homologacije, kot jih določajo direktive 70/156/EGS [1], 74/150/EGS [2] in 92/61/EGS [3];
–   opremo, posebej načrtovano za jedrsko uporabo, pri kateri lahko napaka povzroči oddajanje radioaktivnosti;
–   opremo za nadziranje vrtin, ki se uporablja v naftni, plinski ali geotermični raziskovalni in črpalni panogi ter v podzemnih skladiščih, namenjenih zadrževanju in/ali nadziranju tlaka vrtin, vključno s cevovodi;
–   cevovode plavžev, vključno s sistemom za hlajenje peči, rekuperatorje vročega zraka, izločevalnike prahu in izparilnike izpušnih plinov plavža ter kupolke za direktno redukcijo, vključno s hlajenjem peči, plinskimi izmenjevalci, vakuumskimi pečmi in lonci za taljenje, pretaljevanje, razplinjevanje ter ulivanje jekla in barvnih kovin;
–   ogrodje za visokonapetostno električno opremo, kot so stikalne in kontrolne naprave ter transformatorji;
–   tlačne cevovode za vsebovanje sistemov za prenašanje, na primer električne energije, in telefonske kable;
–   stalno fiksne cevovode za ladje, rakete, zrakoplove in premične enote na vodi;
–   notranje cevovode v medicinskih pripomočkih iz Direktive 93/142/EGS [4] o medicinskih pripomočkih;
–   notranje cevovode kotlov za gretje in cevi, ki so sestavni del tlačnih posod.

General Information

Status
Published
Publication Date
12-Dec-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Nov-2017
Due Date
29-Jan-2018
Completion Date
13-Dec-2017

Relations

Buy Standard

Standard
EN 13480-1:2018
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 1. del: SplošnoMetallische industrielle Rohrleitungen - Teil 1: AllgemeinesTuyauteries industrielles métalliques - Partie 1: GénéralitésMetallic industrial piping - Part 1: General77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 13480-1:2017SIST EN 13480-1:2018en,fr,de01-januar-2018SIST EN 13480-1:2018SLOVENSKI
STANDARDSIST EN 13480-1:20121DGRPHãþD



SIST EN 13480-1:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13480-1
June
t r s y ICS
t uä r v rä r u Supersedes EN
s u v z ræ sã t r s tEnglish Version
Metallic industrial piping æ Part
sã General Tuyauteries industrielles métalliques æ Partie
s ã Généralité
Metallische industrielle Rohrleitungen æ Teil
sã Allgemeines This European Standard was approved by CEN on
t s June
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u v z ræ sã t r s y ESIST EN 13480-1:2018



EN13480æ1:2017(E)Issue1(2017æ06)2ContentsFPageFEuropeanforeword.3 1Scope.5 2Normativereferences.5 3Terms,definitions,symbolsandunits.6 3.1Termsanddefinitions.6 3.2Symbolsandunits.9 4Interdependencyofthepartsoftheseries.9 5Classificationofpiping.10 5.1General.10 5.2Pipingofcategory0.12 5.3Pipingoperating0,5bar.12 5.4Specialcases.12 6RequirementsforPipingsystems.12 AnnexA(informative)MaintenanceofEN13480.13 A.1Introduction.13 A.2ScopeandcompositionoftheWorkingGroup.13 A.3MethodsofMaintenance.13 A.3.1Administrationtools.13 A.3.2Submissionofqueriesandconsultationoftheexperts.14 A.4Resultsoftheconsultation.14 A.4.1Practicalprovisionsforinterpretations.14 A.4.2Practicalprovisionsforcorrections.15 AnnexY(informative)HistoryofEN13480æ1.16 Y.1DifferencesbetweenEN13480æ1:2012andEN13480æ1:2017.16 AnnexZA(informative)RelationshipbetweenthisEuropeanStandardandtheEssentialRequirementsofEUDirective2014/68/EUaimedtobecovered.17 Bibliography.18 FFFSIST EN 13480-1:2018



EN13480æ1:2017(E)Issue1(2017æ06)3EuropeanforewordpipingFandFpipelinesóáFtheFsecretariatFofFwhichFisFheldFbyFAFNORäFThisFEuropeanFStandardFshallFbeFgivenFtheFstatusFofFaFnationalFstandardáFeitherFbyFpublicationFofFanFidenticalFtextForFbyFendorsementáFatFtheFlatestFbyFDecemberFFtFrFsFyáFandFconflictingFnationalFstandardsFshallFbeFwithdrawnFatFtheFlatestFbyFDecemberFFtFrFsFyäFAttentionFisFdrawnFtoFtheFpossibilityFthatFsomeFofFtheFelementsFofFthisFdocumentFmayFbeFtheFsubjectFofFleFforFidentifyingFanyForFallFsuchFpatentFrightsäFThisFdocumentFhasFbeenFpreparedFunderFaFmandateFgivenFtoFCENFbyFtheFEuropeanFCommissionFandFtheFEuropeanFFreeFTradeFAssociationáFandFsupportsFessentialFrequireForFrelationshipFwithFEUFDirectiáFwhichFisFanFintegralFpartFofFthisFdocumentäFThisFEuropeanFStandardFENFFsFuFvFzFrFforFmetallicFindustrialFpipingFconsistsFofFeightFinterdependentFandFnotFdissociableFPartsFwhichFareãF Part1:General; Part2:Materials; Part3:Designandcalculation; Part4:Fabricationandinstallation; Part5:Inspectionandtesting; Part6:Additionalrequirementsforburiedpiping; CEN/TR13480æ7,Guidanceontheuseofconformityassessmentprocedures; Part8:Additionalrequirementsforaluminiumandaluminiumalloypiping.AlthoughFtheseFPartsFmayFbeFobtainedFseparatelyáFitFshouldFbeFrecognisedFthatFtheFPartsFareFinterædependantäFAsFsuchFtheFmanufactureFofFmetallicFindustrialFpipingFrequiresFtheFapplicationFofFallFtheFrelevantFPartsFinForderFforFtheFrequirementsFofFtheFStandardFtoFbeFsatisfactorilyFfulfilledäFThisFEuropeanFStandardFwillFbeFmaintainedFbyFaFMaintenanceFMHDFworkingFgroupFwhoseFscopeFofFworkingFisFlimitedFtoFcorrectionsFandFinterpretationsFrelatedFtoFENFFsFuFvFzFräFSIST EN 13480-1:2018



EN13480æ1:2017(E)Issue1(2017æ06)4submittingFquestionsFcanFbeFdownloadedFfromFtheFlinkFtoFtheFMHDFwebsiteäFAfterFsubjectFexpertsFhaveFagreedFanFansweráFtheFanswerFwillFbeFcommunicatedFtoFtheFquestioneräFCorrectedFpagesFwillFbeFgivenFspecificFissueFnumberFandFissuedFbyFCENFaccordingFtoFCENFRulesäFInterpretationFsheetsFwillFbeFpostedFonFtheFwebsiteFofFtheFMHDäFThisFdocumentFsupersedesFENFFsFuFvFzFræFsãFtFrFsFtäFThisFnewFeditionFincorporatesFtheFAmendmentsFwhichFhaveFbeenFapprovedFpreviouslyFbyFCENFmembersáFandFtheFcorrectedFpagesFupFtoFIssueFFvFwithoutFanyFfurtherFtechnicalFchangeäFAnnexFYFprovidesFdetailsFofFsignificantFtechnicalFchangesFbetweenFthisFEuropeanFStandardFandFtheFpreviousFeditionäFAmendmentsFtoFthisFnewFeditionFmayFbeFissuedFfromFtimeFtoFtimeFandFthenFusedFimmediatelyFasFalternativesFtoFrulesFcontainedFhereinäFAccordingFtoFtheFCENæCENELECFInternalFRegulationsáFtheFnationalFstandardsForganizationsFofFtheFfollowingFcountriesFareFboundFtoFimplementFthisFEuropeanFStandardãFAustriaáFBelgiumáFBulgariaáFCroatiaáFCyprusáFCzechFRepublicáFDenmarkáFEstoniaáFFinlandáFFormerFYugoslavFRepublicFofFMacedoniaáFFranceáFGermanyáFGreeceáFHungaryáFIcelandáFIrelandáFItalyáFLatviaáFLithuaniaáFLuxembourgáFMaltaáFNetherlandsáFNorwayáFPolandáFPortugaláFRomaniaáFSerbiaáFSlovakiaáFSloveniaáFSpaináFSwedenáFSwitzerlandáFTurkeyFandFtheFUnitedFKingdomäFFFFFFFFFFFFFFFFFFSIST EN 13480-1:2018



EN13480æ1:2017(E)Issue1(2017æ06)51 ScopeThisFEuropeanFStandardFspecifiesFtheFrequirementsFforFindustrialFpipingFsystemsFandFsupportsáFincludingFsafetyFsystemsáFmadeFofFmetallicFmaterialsFwithFaFviewFtoFensureFsafeFoperationäFThisFEuropeanFStandardFisFapplicableFtoFmetallicFpipingFaboveFgroundáFductedForFburiedáFirrespectiveFofFpressureäFThisFEuropeanFStandardFisFnotFapplicableFtoãF PipelinesFandFtheirFaccessoriesâF StreamFwaterwaysFsuchFasFpenstocksáFpressureFtunnelsáFpressureFshaftFforFhydroæelectricæinstallationsFandFtheirFrelatedFspecificFaccessoriesâF PipingFforFvehiclesFcoveredFbyFtheFEECFtypeFapprovalFproceduresFasFlaidFdownFinFDirectivesF ItemsFspecificallyFdesignedFforFnuclearFuseáFfailureFofFwhichFmayFcauseFanFemissionFofFradioactivityâF WellæcontrolFequipmentFusedFinFtheFpetroleumáFgasForFgeothermalFexplorationFandFextractionFindustryFandFinFundergroundFstorageFwhichFisFintendedFtoFcontaiincludingFtheFpipingâF PipingFofFblastFfurnacesFincludingFtheFfurnaceFcoolingáFhotFblastFrecuperatorsáFdustFextractorsFandFblastFfurnaceFexhaustFgasFscrubbersFandFdirectFreducingFcupolasFincludingFtheFfurnaceFcoolingáFgasFconvertersFandFvacuumFfurnacesFandFpansFforFmeltingáFreæmeltingFdeægassingFandFcastingFofFsteelFandFnonFferrousFmetalsâF EnclosuresFforFhighFvoltageFelectricalFequipmentFsuchFasFswitchgearáFcontrolFgearFandFtransformersâF PressurizedFpipesFforFtheFcontainmentFofFtransmissionFsystemsFsuchFasFforFelectricalFpowerFandFtelephoneFcablesâF PermanentlyFfixedFpipingFforFshipsáFrocketsáFaircraftFandFmobileFoffshoreFunitsâF InternalFpipingFinFmedicalFdevicesFasFdefinedFinFtheFDirectiveFdevicesâF InternalFpipingFofFboilersFandFpipingFintegralFtoFpressureFvesselsäF2 NormativereferencesTheFfollowingFdocumentsáFinFwholeForFinFpartáFareFnormativelyFreferencedFinFthisFdocumentFandFareFindispensableFforFitsFapplicationäFForFdatedFreferencesáFonlyFtheFeditionFcitedFappliesäFForFundatedFreferencesáFtheFlatestFFFSIST EN 13480-1:2018



EN13480æ1:2017(E)Issue1(2017æ06)6ENFFyFxFvæFtãFtFrFrFtáFPressureequipment—Part2:Quantities,symbolsandunitsFENFFyFxFvæFuãFtFrFrFtáFPressureequipment—Part3:DefinitionsandpartiesinvolvedFENFFsFuFvFzFræFtãFtFrFsFyáFMetallicindustrialpiping—Part2:MaterialsFENFFsFuFvFzFræFuãFtFrFsFyáFMetallicindustrialpiping—Part3:DesignandcalculationFENFFsFuFvFzFræFvãFtFrFsFyáFMetallicindustrialpiping—Part4:FabricationandinstallationFENFFsFuFvFzFræFwãFtFrFsFyáFMetallicindustrialpiping—Part5:InspectionandtestingFENFFsFuFvFzFræFxãFtFrFsFyáFMetallicindustrialpiping—Part6:AdditionalrequirementsforburiedpipingFMetallicindustrialpiping—Part7:GuidanceontheuseofconformityassessmentproceduresFENFFsFuFvFzFræFzãFtFrFsFyáFMetallicindustrialpiping—Part8:Additionalrequirementsforaluminiumandaluminiumalloypiping3 Terms,definitions,symbolsandunits3.1 TermsanddefinitionsForFtheFpurposesFofFthisFEuropeanFStandardáFtheFtermsFandFdefinitionsFgivenFinFENFFyFxFvæFuãFtFrFrFtFandFtheFfollowingFapplyäFFSpecificFdefinitionsFareFgivenFinFtheFrelevantFPartsFofFthisFEuropeanFStandardäF3.1.1ambienttemperaturetemperatureFofFtheFsurroundingFatmosphereFinFtheFimmediateFvicinityFofFtheFpipingFsystemF3.1.2pipingsystempipingpipeForFsystemFofFpipesFforFtheFconveyanceFofFfluidsFwithinFanFindustrialFsiteFFNoteFFsFtoFentryFFAFpipingFsystemFcanFbeFregardedFasFoneFsingleFsystemFprovidedFitFconveysFsubstancesFhavingFtheFsameFpropertiesFandFitFisFasFaFwholeFdesignedFforFtheFsameFallowableFpressureäFFNoteFFtFtoFentryFFInterruptionFbyFdifferentFcomponentsFsuchFasFpumpsáFmachinesáFvesselsFetcäFdoesFnotFprecludeFtheFintegrationFtoFoneFsingleFpipingäF3.1.3fluidgasesáFliquidsFandFvapoursFinFpureFphaseFasFwellFasFmixturesFthereofFFNoteFtoFentryFFAFfluidFmayFcontainFaFsuspensionFofFsolidsäFFSIST EN 13480-1:2018



EN13480æ1:2017(E)Issue1(2017æ06)73.1.4manufacturerpersonForForganizationFthatFtakesFfullFresponsibilityFforFtheFdesignFandFmanufactureFofFtheFpipingFsystemFandFitsFconformityFtoFENFFsFuFvFzFrFNoteFFsFtoFentryFFTheFmanufacturerFisFresponsibleFforFcarryingFoutFallFrelevantFproductionFprocessesFandFtestingFasFspecifiedFinFtheFapplicableFstandardsäFFNoteFFtFtoFentryFFIfFaFmanufacturerFemploysFsubcontractorsForFfaresponsibleFforFtheirFworkäFNoteFFuFtoFentryFFInFtheFECFMemberFStatesFaFmanufacturerForFhisFrepresentativeFisFresponsibleFforFtheFconformanceFofFaFpipingFsystemFheFputsFonFtheFmarketáFwithFtheFessentialFsafetyFrequirementsFofFtheFPEDäF3.1.5pipingfabricatorand/orinstallerindividualForForganizationFthatFtakesFresponsibilityFforFtheFfapipingFcomplyingFwithFtheFrequirementsFofFENFFsFuFvFzFrFNoteFtoFentryFFTheFpipingFfabricatorForFtheFinstallerFmayFbeFtheFmanufacturerF3.1.6designerindividualForForganizationFthatFtakesFresponsibilityFforFtheFdesignFofFindustrialFpipingFcomplyingFwithFtheFrequirementsFofFENFFsFuFvFzFrFNoteFtoFentryFFTheFdesignerFcanFalsoFbeFtheFmanufactureräF3.1.7categorycategoryFinFwhichFindustrialFpipingFisFclassifiedFNoteFtoFentryFFTheFcategoryFdependsFonFtheFfluidFcontainedáFtheFmaximumFallowableFpressureFPSFandFnominalFsizeFDNandFtheFphysicalFconditionFofFtheFfluidäF3.1.8testinFaccordanceFwithFaFdefinedFprocedureFwhichFprovidesFanFobjectiveFassessmentFofFaFcharacteristicFofFaFcomponentForFsystemFNoteFtoFentryFFSeeFFigureFFuäFsæFsäF3.1.9testingperfor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.