Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery

This part of EN 1715 specifies the general drawing stock characteristics to be satisfied by unalloyed aluminium and aluminium alloy drawing stock delivered in the form of coils with a unit weight ranging between 1 t and 3 t and obtained by common industrial processes.  It also specifies the technical conditions for inspection and delivery of these products.  These general characteristics and conditions apply to drawing stock intended for the following three main fields of application:  - electrical conductors of aluminium and aluminium alloys;  - wires for general mechanical uses;  - wires for brazing and welding.  The specific requirements to drawing stock for these applications are specified in parts 2, 3 and 4 of EN 1715.  It does not apply to wires which are drawn, but only to drawing stock which is produced by hot-working.  NOTE 1 : Manufacture of drawing stock:  two main methods exist for the manufacture of drawing stock:  - continuously Cast Rod - (CCR):  a section is cast continuously in the groove of a wheel, the groove being closed by an endless strip;  the solid and still hot section is rolled in a multistand rolling mill to the required diameter;  the drawing stock rod thus produced is wound continuously to form coils 1 t to 3 t in  weight;  - hot rolled Rod - (HRR):  a wirebar of diameter 100 mm to 150 mm is heated and rolled to the required diameter;  the coils produced, weighing up to about 100 kg are butt welded together and wound to form coils with unit weight of 1 t to 3 t.  NOTE 2 : It is also possible to obtain drawing stock by extrusion.

Aluminium und Aluminiumlegierungen - Vordraht - Teil 1: Allgemeine Anforderungen und technische Lieferbedingungen

Dieser Teil von prEN 1715 legt die allgemeinen Anforderungen für Vordraht aus unlegiertem Aluminium und aus Aluminiumlegierungen fest, welcher in Ringen (coils) mit einem Gewicht von 1t bis 3t geliefert und mit Hilfe üblicher Herstellungsverfahren gefertigt wird. Er legt auch die technischen Lieferbedingungen für diese Erzeugnisse fest.

Aluminium et alliages d'aluminium - Fil machine - Partie 1: Exigences générales et conditions techniques de contrôle et de livraison

Cette partie de la norme EN 1715 a pour objet de définir les caractéristiques générales auxquelles doivent satisfaire les fils machine en aluminium non allié ou en alliages d'aluminium livrés sous forme de bobines de poids compris entre 1 et 3 tonnes et obtenus par les procédés industriels courants. Elle spécifie également les conditions techniques de contrôle et de livraison de ces produits.

Aluminij in aluminijeve zlitine - Debela žica - 1. del: Splošne zahteve in tehnični pogoji za prevzem in dobavo

General Information

Status
Withdrawn
Publication Date
31-Mar-1998
Withdrawal Date
26-May-2008
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-May-2008
Due Date
30-May-2008
Completion Date
27-May-2008

Relations

Buy Standard

Standard
EN 1715-1:1998
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1715-1:1998
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH'HEHODåLFDGHO6SORãQH]DKWHYHLQWHKQLþQL
SRJRML]DSUHY]HPLQGREDYR
Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and
technical conditions for inspection and delivery
Aluminium und Aluminiumlegierungen - Vordraht - Teil 1: Allgemeine Anforderungen und
technische Lieferbedingungen
Aluminiu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.