SIST EN 12962:2011
(Main)Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)
Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)
This European Standard specifies a test method to determine the elastic behaviour of and elastomeric monocomponent liquid adhesive under specified conditions.
This method is particularly suitable for production control.
Klebstoffe - Bestimmung des elastischen Verhaltens flüssiger Klebstoffe (Elastizitätsindex)
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung des elastischen Verhaltens eines flüssigen elastomeren Einkomponenten-Klebstoffs unter festgelegten Bedingungen fest. Dieses Verfahren ist besonders zur Fertigungsüberwachung geeignet.
Adhésifs - Détermination du comportement élastique des adhésifs liquides (indice d'élasticité)
La présente Norme européenne spécifie une méthode d’essai de détermination du comportement élastique d’un adhésif liquide monocomposant à base d’élastomère dans des conditions spécifiées.
Cette méthode est particulièrement adaptée à la maîtrise de la production.
Lepila - Določevanje elastičnih lastnosti tekočih lepil ("indeks elastičnosti")
Ta evropski standard določa preskusno metodo za določevanje elastičnih lastnosti in elastomerne monokomponente tekočih lepil pod določenimi pogoji.
Ta metoda je zlasti primerna za kontrolo proizvodnje.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HODVWLþQRVWLKlebstoffe - Bestimmung des elastischen Verhaltens flüssiger Klebstoffe (Elastizitätsindex)Adhésifs - Détermination du comportement élastique des adhésifs liquides (indice d'élasticité)Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12962:2011SIST EN 12962:2011en,fr,de01-julij-2011SIST EN 12962:2011SLOVENSKI
STANDARDSIST EN 12962:20021DGRPHãþD
SIST EN 12962:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12962
April 2011 ICS 83.180 Supersedes EN 12962:2001English Version
Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)
Adhésifs - Détermination du comportement élastique des adhésifs liquides (indice d'élasticité)
Klebstoffe - Bestimmung des elastischen Verhaltens flüssiger Klebstoffe (Elastizitätsindex) This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12962:2011: ESIST EN 12962:2011
EN 12962:2011 (E)
2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Principle .55 Apparatus .56 Procedure .57 Expression of results .78 Test report .7Bibliography .8 SIST EN 12962:2011
EN 12962:2011 (E)
3 Foreword This document (EN 12962:2011) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12962:2001. The main modifications regarding the previous version are in Figure 1 and 6.10. SAFETY STATEMENT — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HODVWLþQRVWLKlebstoffe - Bestimmung des elastischen Verhaltens flüssiger Klebstoffe (Elastizitätsindex)Adhésifs - Détermination du comportement élastique des adhésifs liquides (indice d'élasticité)Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:FprEN 12962kSIST FprEN 12962:2010en,fr,de01-december-2010kSIST FprEN 12962:2010SLOVENSKI
STANDARD
kSIST FprEN 12962:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 12962
September 2010 ICS 83.180 Will supersede EN 12962:2001English Version
Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)
Adhésifs - Détermination du comportement élastique des adhésifs liquides (indice d'élasticité)
Klebstoffe - Bestimmung des elastischen Verhaltens flüssiger Klebstoffe (Elastizitätsindex) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 193.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 12962:2010: EkSIST FprEN 12962:2010
FprEN 12962:2010 (E)
2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Principle .55 Apparatus .56 Procedure .57 Expression of results .78 Test report .7Bibliography .8 kSIST FprEN 12962:2010
FprEN 12962:2010 (E)
3 Foreword This document (FprEN 12962:2010) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12962:2001. The main modifications regarding the previous version are in Figure 1 and 6.10. SAFETY STATEMENT — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation. kSIST FprEN 12962:2010
FprEN 12962:2010 (E)
4 Introduction Many liquid elastomeric adhesives show, depending on the nature of basi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.