SIST EN 13300:2002

Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification

This European Standard specifies a general system for the classification of water-borne coating materials and coating systems for the decoration and protection of interior walls and ceilings comprised of new and old, coated and uncoated surfaces.

Beschichtungsstoffe - Wasserhaltige Beschichtungsstoffe und Beschichtungssysteme für Wände und Decken im Innenbereich - Einteilung

In dieser Europäischen Norm werden wasserhaltige Beschichtungsstoffe und Beschichtungssysteme für die Gestaltung und den Schutz von neuen und alten, beschichteten und unbeschichteten Wänden und Decken im Innenbereich eingeteilt.

Peintures et vernis - Produits de peinture et systemes de peinture en phase aqueuse pour murs et plafonds intérieurs - Classification

Cette Norme européenne définit un systeme général de classification des produits de peinture et des systemes de revetement en phase aqueuse pour la décoration et la protection, a l'intérieur, des murs et plafonds neufs ou anciens, nus ou déja revetus.

Barve in laki – Premazna sredstva in premazni sistemi na vodni osnovi za notranje zidove in stropove – Klasifikacija

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2002
• Withdrawal Date: 21-Dec-2022
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 16-Dec-2022
• Due Date: 08-Jan-2023
• Completion Date: 22-Dec-2022
• Ref Project: EN 13300:2001 - Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification

Relations

• Replaced By: SIST EN 13300:2023 - Paints and varnishes - Paints and varnishes for interior walls and ceilings - Classification
• Effective Date: 01-Feb-2023
• Corrected By: SIST EN 13300:2002/AC:2002 - Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13300:2002
01-april-2002
Barve in laki – Premazna sredstva in premazni sistemi na vodni osnovi za notranje
zidove in stropove – Klasifikacija
Paints and varnishes - Water-borne coating materials and coating systems for interior
walls and ceilings - Classification
Beschichtungsstoffe - Wasserhaltige Beschichtungsstoffe und Beschichtungssysteme für
Wände und Decken im Innenbereich - Einteilung
Peintures et vernis - Produits de peinture et systemes de peinture en phase aqueuse
pour murs et plafonds intérieurs - Classification
Ta slovenski standard je istoveten z: EN 13300:2001
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN 13300:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13300
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2001
ICS 87.040
English version
Paints and varnishes - Water-borne coating materials and
coating systems for interior walls and ceilings - Classification
Peintures et vernis - Produits de peinture et systèmes de Beschichtungsstoffe - Wasserhaltige Beschichtungsstoffe
peinture en phase aqueuse pour murs et plafonds intérieurs und Beschichtungssysteme für Wände und Decken im
- Classification Innenbereich - Einteilung
This European Standard was approved by CEN on 19 February 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13300:2001 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

Page 2
EN 13300 : 2001
Contents
Page
Foreword . 2
Introduction. 2
1 Scope . 2
2 Normative references . 2
3 Terms and definitions . 3
4 General classification . 3
5 Additional classification . 3
Annex A (informative) Other criteria . 6
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawn at the latest
by October 2001.
Annex A is informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
Introduction
The names used today to describe coating materials and coating systems pay little regard to technical, functional
and end use categories. This makes it difficult to devise an unequivocal simple terminology applicable to all product
types. This European Standard attempts to address this problem by separately defining categories of appearance
and end use, but with no assumptions as to whether or not a given product, by its appearance alone, will be suitable
for a particular use. The objective is to avoid misuse of coating systems by the misunderstanding or over-statement
of performance claims. The possibilities for future technical advances are recognized.
The treatment of interior surfaces has aesthetic and/or protective functions. The results of such treatments include
the following:
– decoration of surfaces by changing or restoring their appearance;
– protection of the substrate against aesthetic and/or functional deterioration.
This European Standard identifies criteria that need to be considered when assessing the suitability of a coating
system for a particular end use and provides a framework for communicating this information between manufacturer
and user. This should assist in the removal of technical barriers to trade. It is in the responsibility of the manufacturer
of a coating system to designate the appropriate categories for end use and appearance.
1 Scope
This European Standard specifies a general system for the classification of water-borne coating materials and
coating systems for the decoration and protection of interior walls and ceilings comprised of new and old, coated and
uncoated surfaces.
2 Normative references
This European Standard incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the last edition of the
publication referred to applies (including amendments).

---------------------- Page: 3 ----------------------

Page 3
EN 13300 : 2001
EN 971-1 1996 Paints and varnishes – Terms and definitions for coating materials – Part 1: General
terms
EN 1062-1 1996 Paints and varnishes – Coating materials and coating systems for exterior masonry and
concrete – Part 1: Classification
EN 21524 Paints and varnishes – Determination of fineness of grind (ISO 1524:1983)
EN ISO 787-18 General methods of test for pigments and extenders – Part 18: Determination of residue
on sieve; Mechanical flushing procedure (ISO 787-18:1983)
EN ISO 2813 Paints and varnishes – Determination of specular gloss of non-metallic paint films at 20°,
60° and 85° (ISO 2813:1994, including Technical Corrigendum 1:1997)
ISO 787-7 General methods of test for pigments and extenders – Part 7: Determination of residue
on sieve; Water method; Manual procedure
ISO 6504-3 Paints and varnishes – Determination of hiding power – Part 3: Determination of contrast
ratio (opacity) of light-coloured paints at a fixed spreading rate
ISO 11998 Paints a
...