SIST EN 12982:2009

Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves

This European Standard specifies the end to end and centre to end dimensions for steel butt welding end valves with connecting dimensions of welding ends in compliance with EN 12627, used in PN and Class designated piping systems.
The range of PN is:
   PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; PN 500.
The range of Class is:
   Class 150, Class 300, Class 600, Class 900, Class 1 500, Class 2 500.
The range of nominal size is:
DN 8; DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900, DN 1 000; DN 1 200.
NOTE 1   DN 750 is not applicable to PN designated valves.
NOTE 2   See Annex B (informative) for the relationship between nominal size (DN) and nominal pipe size (NPS).
NOTE 3   Valves having welding end profiles different from in EN 12627, may use the same dimensions specified in Table 1.

Industriearmaturen - Baulängen für Armaturen mit Anschweißenden

Diese Europäische Norm legt die Baulängen für Armaturen aus Stahl mit Anschweißenden und Anschluss¬maßen nach EN 12627 fest, die in nach PN und Class bezeichneten Rohrleitungssystemen verwendet werden.
Der PN-Bereich umfasst:
-   PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400.
Der Class-Bereich umfasst:
-   Class 150, Class 300, Class 600, Class 900, Class 1 500, Class 2 500.
Der Nennweitenbereich umfasst:
-   DN 8; DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 200.
ANMERKUNG 1   DN 750 gilt nicht für nach PN bezeichnete Armaturen.
ANMERKUNG 2   Siehe Anhang B zum Verhältnis zwischen Nennweite (DN) und Rohr-Nennweite (NPS).
ANMERKUNG 3   Für Armaturen mit Anschweißenden, die nicht in EN 12627 festgelegt sind, können die entsprechenden Maße nach Tabelle 1 verwendet werden.

Robinetterie industrielle - Dimensions entre extrémités et d'extrémité a axe des appareils de robinetterie a souder en bout

La présente Norme européenne spécifie les dimensions entre extrémités et d'extrémité à axe des appareils de robinetterie en acier à souder en bout dont les dimensions des extrémités à souder en bout sont conformes à l’EN 12627 et qui sont utilisés dans les systèmes de canalisation désignés par PN et Class.
La gamme des PN est la suivante :
-   PN 10 ; PN 16 ; PN 25 ; PN 40 ; PN 63 ; PN 100 ; PN 160 ; PN 250 ; PN 320 ; PN 400.
La gamme des "Class" est la suivante :
-   Class 150 ; Class 300 ; Class 600 ; Class 900 ; Class 1 500 ; Class 2 500.
La gamme des diamètres nominaux est la suivante :
-   DN 8 ; DN 10 ; DN 15 ; DN 20 ; DN 25 ; DN 32 ; DN 40 ; DN 50 ; DN 65 ; DN 80 ; DN 100 ; DN 125 ; DN 150 ; DN 200 ; DN 250 ; DN 300 ; DN 350 ; DN 400 ; DN 450 ; DN 500 ; DN 600 ; DN 700 ; DN 750 ; DN 800 ; DN 900 ; DN 1 000 ; DN 1 200.
NOTE 1   DN 750 n'est pas applicable aux appareils de robinetterie désignés PN.
NOTE 2   Voir l'Annexe B pour la relation entre le diamètre nominal (DN) et la dimension nominale de la tuyauterie (NPS).
NOTE 3   Les appareils de robinetterie avec des profils d’extrémités à souder différents de ceux spécifiés dans l’EN 12627, peuvent avoir les mêmes dimensions que celles spécifiées dans le Tableau 1.

Industrijski ventili - Vgradne dolžine za ventile z varjenim priključkom

General Information

• Status: Published
• Public Enquiry End Date: 24-Feb-2008
• Publication Date: 10-Sep-2009
• ICS: 23.060.01 - Valves in general
• Technical Committee: IHPV - Hydraulics and pneumatics
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Jul-2009
• Due Date: 12-Sep-2009
• Completion Date: 11-Sep-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 12982:2009 - Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves

Relations

• Replaces: SIST EN 12982:2001 - Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
• Effective Date: 01-Oct-2009
• Replaces: SIST EN 12982:2001 - Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OMXþNRPIndustriearmaturen - Baulängen für Armaturen mit AnschweißendenRobinetterie industrielle - Dimensions entre extrémités et d'extrémité a axe des appareils de robinetterie a souder en boutIndustrial valves - End-to-end and centre-to-end dimensions for butt welding end valves23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 12982:2009SIST EN 12982:2009en,fr,de01-oktober-2009SIST EN 12982:2009SLOVENSKI
STANDARDSIST EN 12982:20011DGRPHãþD



SIST EN 12982:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12982August 2009ICS 23.060.01Supersedes EN 12982:2000
English VersionIndustrial valves - End-to-end and centre-to-end dimensions forbutt welding end valvesRobinetterie industrielle - Dimensions entre extrémités etd'extrémité à axe des appareils de robinetterie à souder enboutIndustriearmaturen - Baulängen für Armaturen mitAnschweißendenThis European Standard was approved by CEN on 17 July 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12982:2009: ESIST EN 12982:2009



EN 12982:2009 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Dimensions and tolerances .64.1 Basic series .64.2 Tolerances .6Annex A (informative)
Origin of basic series . 18Annex B (informative)
Relationship between DN (nominal size) and nominal pipe size (NPS) . 20Bibliography . 21 SIST EN 12982:2009



EN 12982:2009 (E)
3 Foreword This document (EN 12982:2009) has been prepared by Technical Committee CEN/TC 69 “Industrial valves”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12982:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 12982:2009



EN 12982:2009 (E) 4 Introduction The basic series given in this European Standard are taken from the original series shown in Annex A. Changes made to the original series will not be automatically incorporated into this European Standard. The progress in work in the standardization of the different products may require a revision of this European Standard by adding or subtracting some basic series.
SIST EN 12982:2009



EN 12982:2009 (E)
5 1 Scope This European Standard specifies the end-to-end and centre-to-end dimensions for steel butt-welding end valves with connecting dimensions of welding ends in compliance with EN 12627, used in PN and Class designated piping systems. The range of PN is:  PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400. The range of Class is:  Class 150, Class 300, Class 600, Class 900, Class 1 500, Class 2 500. The range of nominal size is:  DN 8; DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900, DN 1 000; DN 1 200. NOTE 1 DN 750 is not applicable to PN designated valves. NOTE 2 See Annex B for the relationship between nominal size (DN) and nominal pipe size (NPS). NOTE 3 Valves having welding end profiles different from those specified in EN 12627, may use the same dimensions than those specified in Table 1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 736-1:1995, Valves — Terminology — Part 1: Definition of types of valves EN 736-2:1997, Valves — Terminology — Part 2: Definition of components of valves 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 736-1:1995 and EN 736-2:1997 and the following apply. 3.1 end-to end dimensions (ETE) distance expressed between the ends of the body for straight pattern valves other than those with flanged ends 3.2 centre-to-end dimensions (CTE) distance expressed between one of the ends of the body and the centre of the body for angle pattern valves other than those with flanged ends
SIST EN 12982:2009



EN 12982:2009 (E) 6
a) Straight and oblique pattern valveb)Angle pattern valve Key 1 ETE 2 CTE Figure 1 – ETE and CTE dimensions 4 Dimensions and tolerances 4.1 Basic series The basic series of ETE and CTE dimensions are given in Table 1. For each type of valve, the basic series to be taken into consideration shall be in accordance with Tables 3 to 12. NOTE 1 Table 1 gives complete series. In Tables 3 to 12 the columns of series may be reduced. NOTE 2 For certain sizes/types of valves, alternative dimensions are permitted and are specified in Tables 3 to 12. NOTE 3 Basic series numbers are corresponding to the basic series given in EN 558. 4.2 Tolerances Tolerances on ETE and CTE dimensions shall be in accordance with Table 2. SIST EN 12982:2009



EN 12982:2009 (E)
7 Table 1 — Dimensions of basic series
Dimensions in millimetres DN Basic series 1 2 4 5 7 8 a 9 a 10 11 a 14 15 21 24 a 26 32 a 33 54 55 56 57 a 58 a 59 a 60 8 —
— — —
— — — — — — — — — — — — — — — — 10
130
210 — — 108
90 105 — — 115 — — — — — — — — — — — —
102 15
130
210
140
165 108
90 105
108
57 115 —
152
83
130
76 — —
216
264 — 108 132
108 20
150
230
152
190 117
95 115
117
64 120 —
178
95
150
89 —
229
229
273 114 114 137
117 25
160
230
165
216 127 100 115
127
70 125
120
216 108
160 102 —
254
254
308 127 127 154
127 32
180
260
178
229 146 105 130
140
76 130
140
229 114
180 108 —
279
279
349 140 140 175
140 40
200
260
190
241 159 115 130
165
83 140
240
241 121
240 114
152
305
305
384 152 152 193
165 50
230
300
216
292 190 125 150
203 102 150
250
267 146
250 133
178
368
368
451 184 184 225
216 65
290
340
241
330 216 145 170
216 108 170
270
292 165
290 146
216
419
419
508 210 210 254
241 80
310
380
283
356 254 155 190
241 121 180
280
318 178
310 159
254
381
470
578 190 235 289
283 100
350
430
305
432 305 175 215
292 146 190
300
356 216
350 178
305
457
546
673 229 273 337
305 125
400
500
381
508 356 200 250
330 178 200
325
400 254
400 200
381
551
673
794 279 337 397
381 150
480
550
403
559 406 225 275
356 203 210
350
444 279
450 222
457
610
705
914 305 352 457
403 200
600
650
419
660 521 275 325
495 248 230
400
533 330
550 279
584
737
832 1 022 368 416 511
419 250
730
775
457
787 635 325 390
622 311 250
450
622 394
650 311
711
838
991 1 270 419 495 635
457 300
850
900
507 838 749 375 450
698 349 270
500
711 419
750 356
813
965 1 130 1 422 483 565 711
502 350
980 1 025
762
889 — 425 515
787 394 290
550
838 —
850 —
889 1 029 1 257 — 514 629 —
572 400 1 100 1 150
838
991 — 475 575
914 457 310
600
864 —
950 —
991 1 130 1 384 — 660 — —
610 450 1 200 1 275
914 1 092 — 500 —
978 483 330
650
978 — 1 050 — 1 092 1 219 1 537 — 737 — —
660 500 1 250 1 400
991 1 194 — — 700
978 — 350
700 1 016 — 1 150 — 1 194 1 321 1 664 — 825 — —
711 600 1 450 1 600 1 143 1 397 —
1 295 — 390
800 1 346 — 1 350 — 1 397 1 549 1 943 — 991 — —
813 700 1 650
1 346 1 549 —
1 448 — 430
900 1 499 — 1 550 — 1 549 — — — — — —
914 750 —
1 397 1 651 —
1 524 — — — 1 594 — — — — — — — — — —
914 800 1 850
— 1 651 —
1 676 — 470 1 000 1 778 — 1 750 — — — — — — — —
965 900 2 050
1 727 2 083 —
1 956 — 510 1 100 2 083 — 1 950 — — — — — — — — 1 016 1 000 2 250
1 981 — —
— — 550 1 200 — — 2 150 — — — — — — — — — 1 200 —
— — —
— — 630 1 400 — — — — — — — — — — — —
SIST EN 12982:2009



EN 12982:2009 (E) 8 Table 1 (continued)
Dimensions in millimetres DN Basic series 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 78 79 80 81 82 a 83 a
8 — — — — — — — — — — — — — — — — — — —
65 — —
10 — — — 130
150
65
70
270— — — — — — — — — — —
65 —
90
15 140 — — 130
150
65
75
270— — —
187
203 194
279
216
108— —
65 —
90
20 152 — — 130
150
75
90
270— — —
187
206 194
279
216
117— —
70 —
90
25 165 — — 130
160
85 100
270
140
140
186
187
210 197
279
216
127— —
85 —
90
32 178 — — 160
180100 110
270
165
165
237— — — — —
140— — 100 — 105
40 190 —
190 180
210140 125
270
178
178
232
222
251 235
330
260
165— — 110 — 105
50 216
267
216 210
250150 150
300
216
216
279
254
286 292
375
318
178— — 125 — 115
65 241
305
241 290
340170 190
360
254
254
330
292
311 292
375
318
190— — 150 — 145
80 283
330
283 310
380180 220
390
305
305
368
318
337 318
460
381
203— — 180 152 155
100 305
356
305 350
430190 270
450
356
406
457
368
394 368
530
406
229— — 210 178 175
125 381
381— 400
500200 330
525
43
...