SIST EN ISO 17703:2018
(Main)Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
ISO 17703:2003 specifies a test method for determining the effect of heat on the tensile strength of uppers or complete upper assemblies irrespective of the material, in order to assess the suitability for the end use.
Schuhe - Prüfverfahren für Obermaterialien - Verhalten bei hohen Temperaturen (ISO 17703:2003)
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung des Einflusses von Wärme auf die Zugfestigkeit von Obermaterialien oder vollständigem Schuhoberteil unabhängig vom Werkstoff fest, um die Gebrauchseigenschaften im fertigen Zustand zu bestimmen.
Chaussures - Méthodes d'essai des tiges - Comportement aux températures élevées (ISO 17703:2003)
L'ISO 17703:2003 spécifie une méthode d'essai pour déterminer l'effet de la chaleur sur la résistance à la traction des tiges ou assemblage complet de la tige, quel que soit le matériau qui les compose, afin d'évaluer si elles conviennent à l'utilisation finale.
Obutev - Preskusne metode za zgornje dele - Obnašanje pri visoki temperaturi (ISO 17703:2003)
ISO 17703:2003 določa preskusno metodo za ugotavljanje učinka toplote na natezno trdnost zgornjih delov ali celotnih zgornjih sestavov (ne glede na material) za namene ocenjevanja primernosti za končno uporabo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17703:2018
01-december-2018
1DGRPHãþD
SIST EN 13519:2004
Obutev - Preskusne metode za zgornje dele - Obnašanje pri visoki temperaturi
(ISO 17703:2003)
Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
Schuhe - Prüfverfahren für Obermaterialien - Verhalten bei hohen Temperaturen (ISO
17703:2003)
Chaussures - Méthodes d'essai des tiges - Comportement aux températures élevées
(ISO 17703:2003)
Ta slovenski standard je istoveten z: EN ISO 17703:2018
ICS:
61.060 Obuvala Footwear
SIST EN ISO 17703:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17703:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 17703:2018
EN ISO 17703
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2018
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Test methods for uppers - High temperature
behaviour (ISO 17703:2003)
Chaussures - Méthodes d'essai des tiges - Schuhe - Prüfverfahren für Obermaterialien - Verhalten
Comportement aux températures élevées (ISO bei hohen Temperaturen (ISO 17703:2003)
17703:2003)
This European Standard was approved by CEN on 20 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17703:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17703:2018
EN ISO 17703:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17703:2018
EN ISO 17703:2018 (E)
European foreword
The text of ISO 17703:2003 has been prepared by Technical Committee ISO/TC 216 "Footwear” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 17703:2018 by
Technical Committee CEN/TC 309 “Footwear” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13519:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17703:2003 has been approved by CEN as EN ISO 17703:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17703:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 17703:2018
INTERNATIONAL ISO
STANDARD 17703
First edition
2003-11-01
Footwear — Test methods for uppers —
High temperature behaviour
Chaussures — Méthodes d'essai des tiges — Comportement aux
températures élevées
Reference number
ISO 17703:2003(E)
©
ISO 2003
---------------------- Page: 7 ----------------------
SIST EN ISO 17703:2018
ISO 17703:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17703:2018
ISO 17703:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17703 was prepared by CEN (as EN 13519:2001) and was adopted, under a special “fast-track
procedure”, by Technical Committee ISO/TC 216, Footwear, in parallel with its approval by the ISO member
bodies.
For the purposes of international standardization, a list of corresponding International and European
Standards for which equivalents are not given in EN 13519 has been added as Annex ZZ.
© ISO 2003 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 17703:2018
ISO 17703:2003(E)
EN 13519:2001 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .
...
SLOVENSKI STANDARD
oSIST prEN ISO 17703:2018
01-julij-2018
Obutev - Preskusne metode za zgornje dele - Obnašanje pri visoki temperaturi
(ISO 17703:2003)
Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
Schuhe - Prüfverfahren für Obermaterialien - Verhalten bei hohen Temperaturen (ISO
17703:2003)
Chaussures - Méthodes d'essai des tiges - Comportement aux températures élevées
(ISO 17703:2003)
Ta slovenski standard je istoveten z: prEN ISO 17703
ICS:
61.060 Obuvala Footwear
oSIST prEN ISO 17703:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 17703:2018
---------------------- Page: 2 ----------------------
oSIST prEN ISO 17703:2018
INTERNATIONAL ISO
STANDARD 17703
First edition
2003-11-01
Footwear — Test methods for uppers —
High temperature behaviour
Chaussures — Méthodes d'essai des tiges — Comportement aux
températures élevées
Reference number
ISO 17703:2003(E)
©
ISO 2003
---------------------- Page: 3 ----------------------
oSIST prEN ISO 17703:2018
ISO 17703:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 17703:2018
ISO 17703:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17703 was prepared by CEN (as EN 13519:2001) and was adopted, under a special “fast-track
procedure”, by Technical Committee ISO/TC 216, Footwear, in parallel with its approval by the ISO member
bodies.
For the purposes of international standardization, a list of corresponding International and European
Standards for which equivalents are not given in EN 13519 has been added as Annex ZZ.
© ISO 2003 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 17703:2018
ISO 17703:2003(E)
EN 13519:2001 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Apparatus and material .4
5 Sampling and conditioning.5
6 Test method.5
6.1 Principle.5
6.2 Procedure .5
7 Expression of results .5
8 Test report .6
Bibliography .7
2
iv © ISO 2003 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 17703:2018
ISO 17703:2003(E)
EN 13519:2001 (E)
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 309 "Footwear", the secretariat of
which is held by AENOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by May 2002, and con
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.