Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004)

ISO 17709:2004 specifies the sampling location, preparation and duration of conditioning of samples and test pieces for footwear components and footwear, to carry out the test methods needed to determine the suitable properties for the end use.

Schuhe - Lage der Stellen für die Probenahme, Vorbereitung und Dauer der Konditionierung von Proben und Prüfstücken (ISO 17709:2004)

Dieser Europäische Norm legt die Lage der Stellen für die Probenahme, Vorbereitung und Dauer der Vorbehandlung von Proben und Prüfstücken von Schuhen und deren Bestandteilen fest, um damit die Prüfverfahren durchzuführen, die zur Bestimmung der entsprechenden Eigenschaften im fertigen Zustand notwendig sind.
Dabei handelt es sich um allgemeine Bedingungen, sofern es bei den jeweiligen Prüfverfahren nicht anders angegeben ist.

Chaussures - Localisation de l'échantillonnage, préparation et durée de conditionnement des échantillons et éprouvettes (ISO 17709:2004)

L'ISO 17709:2004 spécifie les emplacements d'échantillonnage des éléments constitutifs de chaussure, afin de procéder aux méthodes d'essai nécessaires à la détermination des propriétés adéquates pour l'utilisation finale. Celles-ci sont des conditions générales non applicables si la méthode d'essai préconise en d'autres.

Obutev - Mesto vzorčenja, priprava in trajanje kondicioniranja vzorcev in preskušancev (ISO 17709:2004)

ISO 17709:2004 določa mesto vzorčenja, pripravo in trajanje kondicioniranja vzorcev ter preskušancev za obutev in njene sestavne za namene izvajanja preskusnih metod, potrebnih za ugotavljanje ustreznih lastnosti za končno uporabo.

General Information

Status
Published
Public Enquiry End Date
18-Jul-2018
Publication Date
07-Nov-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
26-Oct-2018
Due Date
31-Dec-2018
Completion Date
08-Nov-2018

Relations

Buy Standard

Standard
EN ISO 17709:2018
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 17709:2018
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17709:2018
01-december-2018
1DGRPHãþD
SIST EN 13400:2004
SIST EN 13400:2004/AC:2004
2EXWHY0HVWRY]RUþHQMDSULSUDYDLQWUDMDQMHNRQGLFLRQLUDQMDY]RUFHYLQ
SUHVNXãDQFHY ,62
Footwear - Sampling location, preparation and duration of conditioning of samples and
test pieces (ISO 17709:2004)
Schuhe - Lage der Stellen für die Probenahme, Vorbereitung und Dauer der
Konditionierung von Proben und Prüfstücken (ISO 17709:2004)
Chaussures - Localisation de l'échantillonnage, préparation et durée de conditionnement
des échantillons et éprouvettes (ISO 17709:2004)
Ta slovenski standard je istoveten z: EN ISO 17709:2018
ICS:
61.060 Obuvala Footwear
SIST EN ISO 17709:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17709:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 17709:2018


EN ISO 17709
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 61.060 Supersedes EN 13400:2001
English Version

Footwear - Sampling location, preparation and duration of
conditioning of samples and test pieces (ISO 17709:2004)
Chaussures - Localisation de l'échantillonnage, Schuhe - Lage der Stellen für die Probenahme,
préparation et durée de conditionnement des Vorbereitung und Dauer der Konditionierung von
échantillons et éprouvettes (ISO 17709:2004) Proben und Prüfstücken (ISO 17709:2004)
This European Standard was approved by CEN on 20 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17709:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17709:2018
EN ISO 17709:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17709:2018
EN ISO 17709:2018 (E)
European foreword
The text of ISO 17709:2004 has been prepared by Technical Committee ISO/TC 216 "Footwear” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 17709:2018 by
Technical Committee CEN/TC 309 “Footwear” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13400:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17709:2004 has been approved by CEN as EN ISO 17709:2018 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 17709:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 17709:2018

INTERNATIONAL ISO
STANDARD 17709
First edition
2004-10-15

Footwear — Sampling location,
preparation and duration of conditioning
of samples and test pieces
Chaussures — Localisation de l'échantillonnage, préparation et durée
de conditionnement des échantillons et éprouvettes




Reference number
ISO 17709:2004(E)
©
ISO 2004

---------------------- Page: 7 ----------------------

SIST EN ISO 17709:2018
ISO 17709:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 17709:2018
ISO 17709:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17709 was prepared by the European Committee for Standardization as EN 13400:2001. This
International Standard includes corrigendum EN 13400:2001/AC:2003 and was adopted under a special
“fast-track procedure” by Technical Committee ISO/TC 216, Footwear, in parallel with its approval by the ISO
member bodies.
Throughout the text of this document, read “.this European Standard.” to mean “.this International
Standard.”.

© ISO 2004 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 17709:2018
ISO 17709:2004(E)
Introduction

CEN/TC 309 has established European Standards on test methods to determine the properties of components for
or from footwear. To use correctly these standards, the sampling location is clearly defined.
The test methods need sample taking on the shoe or on the shoe component. It is necessary:
 to integrate in standards realistic and compatible sample size with footwear;
 to define footwear axis to have a system of reference for sampling;
 to have a conditioning time (see EN 12222) before the analysis beginning.
iv © ISO 2004 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 17709:2018
ISO 17709:2004(E)
EN 13400:2001 (E)

1 Scope
This European Standard specifies the sampling location, preparation and duration of conditioning of samples and
test pieces for footwear components and footwear, to carry out the test methods needed to determine the suitable
properties for the end use.
These are the general conditions unless otherwise stated in the corresponding test method.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 1392, Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Test methods
for measuring the bond strength under specified conditions.
EN 12743, Footwear - Test methods for outsoles - Compression energy.
EN 12744, Footwear - Test methods for insoles - Delamination resistance.
EN 12745, Footwear - Test methods for insoles - Heel pin holding strength.
EN 12746, Footwear - Test methods for insoles and insocks - Water absorption and desorption.
EN 12747, Footwear - Test methods for insoles - Abrasion resistance.
EN 12748, Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content.
EN 12770, Footwear - Test methods for outsoles - Abrasion resistance.
EN 12771, Footwear - Test methods for outsoles - Tear strength.
EN 12772, Footwear - Test methods for outsoles - Dimensional stability.
EN 12773, Footwear - Test methods for outsoles - Needle tear strength.
EN 12774, Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance.
EN 12782, Footwear - Test methods for insoles - Resistance to stitch tear.
EN 12800, Footwear - Test methods for insoles - Dimensional stability.
EN 12801, Footwear - Test methods for insoles, lining and insocks - Perspiration resistance.
EN 12803, Footwear - Test methods for outsoles - Tensile strength and elongation.
EN 12826, Footwear - Test methods for lining and insocks - Static friction.
EN 13511, Footwear - Test methods for uppers — Resistance to damage on lasting.
EN 13512, Footwear - Test methods for uppers and lining - Flex resistance.
5
© ISO 2004 – All rights reserved 1

---------------------- Pag
...

SLOVENSKI STANDARD
oSIST prEN ISO 17709:2018
01-julij-2018
2EXWHY0HVWRY]RUþHQMDSULSUDYDLQWUDMDQMHNRQGLFLRQLUDQMDY]RUFHYLQ
SUHVNXãDQFHY ,62
Footwear - Sampling location, preparation and duration of conditioning of samples and
test pieces (ISO 17709:2004)
Schuhe - Lage der Stellen für die Probenahme, Vorbereitung und Dauer der
Konditionierung von Proben und Prüfstücken (ISO 17709:2004)
Chaussures - Localisation de l'échantillonnage, préparation et durée de conditionnement
des échantillons et éprouvettes (ISO 17709:2004)
Ta slovenski standard je istoveten z: prEN ISO 17709
ICS:
61.060 Obuvala Footwear
oSIST prEN ISO 17709:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17709:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17709:2018

INTERNATIONAL ISO
STANDARD 17709
First edition
2004-10-15

Footwear — Sampling location,
preparation and duration of conditioning
of samples and test pieces
Chaussures — Localisation de l'échantillonnage, préparation et durée
de conditionnement des échantillons et éprouvettes




Reference number
ISO 17709:2004(E)
©
ISO 2004

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17709:2018
ISO 17709:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17709:2018
ISO 17709:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17709 was prepared by the European Committee for Standardization as EN 13400:2001. This
International Standard includes corrigendum EN 13400:2001/AC:2003 and was adopted under a special
“fast-track procedure” by Technical Committee ISO/TC 216, Footwear, in parallel with its approval by the ISO
member bodies.
Throughout the text of this document, read “.this European Standard.” to mean “.this International
Standard.”.

© ISO 2004 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 17709:2018
ISO 17709:2004(E)
Introduction

CEN/TC 309 has established European Standards on test methods to determine the properties of components for
or from footwear. To use correctly these standards, the sampling location is clearly defined.
The test methods need sample taking on the shoe or on the shoe component. It is necessary:
 to integrate in standards realistic and compatible sample size with footwear;
 to define footwear axis to have a system of reference for sampling;
 to have a conditioning time (see EN 12222) before the analysis beginning.
iv © ISO 2004 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 17709:2018
ISO 17709:2004(E)
EN 13400:2001 (E)

1 Scope
This European Standard specifies the sampling location, preparation and duration of conditioning of samples and
test pieces for footwear components and footwear, to carry out the test methods needed to determine the suitable
properties for the end use.
These are the general conditions unless otherwise stated in the corresponding test method.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 1392, Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Test methods
for measuring the bond strength under specified conditions.
EN 12743, Footwear - Test methods for outsoles - Compression energy.
EN 12744, Footwear - Test methods for insoles - Delamination resistance.
EN 12745, Footwear - Test methods for insoles - Heel pin holding strength.
EN 12746, Footwear - Test methods for insoles and insocks - Water absorption and desorption.
EN 12747, Footwear - Test methods for insoles - Abrasion resistance.
EN 12748, Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content.
EN 12770, Footwear - Test methods for outsoles - Abrasion resistance.
EN 12771, Footwear - Test methods for outsoles - Tear strength.
EN 12772, Footwear - Test methods for outsoles - Dimensional stability.
EN 12773, Footwear - Test methods for outsoles - Needle tear strength.
EN 12774, Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance.
EN 12782, Footwear - Test methods for insoles - Resistance to stitch tear.
EN 12800, Footwear - Test methods for insoles - Dimensional stability.
EN 12801, Footwear - Test methods for insoles, lining and insocks - Perspiration resistance.
EN 12803, Footwear - Test methods for outsoles - Tensile strength and elongation.
EN 12826, Footwear - Test methods for lining and insocks - Static friction.
EN 13511, Footwear - Test methods for uppers — Resistance to damage on lasting.
EN 13512, Footwear - Test methods for uppers and lining - Flex resistance.
5
© ISO 2004 – All rights reserved 1

---------------------- Page: 7 ----------------------
oSIST prEN ISO 17709:2018
ISO 17709:2004(E)
EN 13400:2001 (E)

EN 13513, Footwear - Test methods for uppers – Deformability.
EN 13514, Footwear - Test methods for uppers - Delamination resistance.
prEN 13515, Footwear - Test methods for uppers and lining - Water vapour permeability and absorption.
prEN 13516, Footwear - Test methods for uppers, lining and insocks - Colour fastness.
EN 13517, Footwear - Test methods for uppers, lining and insocks - Colour migration.
prEN 13518, Footwear - Test methods for uppers - Water resistance.
EN 13519, Footwear - Test methods for uppers - High temperature behaviour.
prEN 13520, Footwear - Test methods for uppers, lining and insocks - Abrasion resistance.
EN 13521, Footwear - Test methods for uppers, lining and insocks - Thermal insulation.
prEN 13522, Footwear - Test methods for uppers - Tensile strength and elongation.
EN 13571, Footwear - Test methods for uppers, lining and insocks - Tear strength.
EN 13572, Footwear - Test methods for uppers, lining and insocks - Seam strength.
prEN ISO 5404, Leather - Physical and mechanical tests - Determination of water resistance of heavy leather.
prEN ISO 17707, Footwear - Test methods for outsoles - Flex resistance (ISO/DIS 17707:2000).
3 Terms and definitions
None.
4 Definition of the reference system
4.1 Location of X axis (see Figure 1)
Determine the locating axis by placing the footwear on an horizontal surface and against a vertical plane so that it
touches the edge of the sole at points A and B on the inner side of the footwear. Construct two further vertical
planes at right angles to the first vertical plane so that they meet the sole at points M and N, the toe point and the
heel point respectively.
Draw a line through M and N.
This constitutes the locating axis, X.
6
2 © ISO 2004 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 17709:2018
ISO 17709:2004(E)
EN 13400:2001 (E)

Figure 1 — Location of X axis
4.2 Location of Y axis (see Figure 2)
Draw a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.