SIST EN 3719:2010

Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard

This standard specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of conductors in aluminium or aluminium alloy for electrical cables for aerospace applications. It applies to stranded conductors with nominal cross-sections of 5 mm2 to 107 mm2 inclusive.

Luft- und Raumfahrt - Leiter aus Aluminium oder Aluminiumlegierung für elektrische Leitungen - Produktnorm

Diese Norm legt die Maße, den ohmschen Widerstand, die mechanischen Eigenschaften, den Aufbau und die
Masse von Leitern aus Aluminium oder Aluminiumlegierung für elektrische Leitungen für Anwendungen in der
Luft- und Raumfahrt fest.
Sie gilt für verseilte Leiter mit Nennquerschnitten von 5 mm2 bis 107 mm2.

Série aérospatiale - Conducteurs en aluminium ou en alliage d'aluminium pour câbles électriques - Norme de produit

Aeronavtika - Vodniki za električne kable iz aluminija in aluminijevih zlitin - Standard za proizvod

Ta standard opredeljuje dimenzije, linearno odpornost, mehanske značilnosti, konstrukcijo in maso vodnikov iz aluminija in aluminijevih zlitin za električne kable za uporabo v aeronavtiki. Velja za vpredene vodnike z nazivnim prečnim prerezom od vključno 5 mm2 do 107 mm2.

General Information

• Status: Withdrawn
• Publication Date: 02-Sep-2010
• Withdrawal Date: 09-Sep-2018
• ICS: 49.025.20 - Aluminium
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-Sep-2018
• Due Date: 03-Oct-2018
• Completion Date: 10-Sep-2018
• Ref Project: EN 3719:2010 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard

Relations

• Replaced By: SIST EN 3719:2018 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
• Effective Date: 22-Aug-2018
• Replaced By: SIST EN 3719:2018 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
• Effective Date: 08-Jun-2022
• Replaces: SIST EN 3719:2006 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
• Effective Date: 01-Oct-2010
• Revised: SIST EN 3719:2018 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
• Effective Date: 10-Aug-2016
• Replaces: SIST EN 3719:2006 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3719:2010
01-oktober-2010
1DGRPHãþD
SIST EN 3719:2006
$HURQDYWLND9RGQLNL]DHOHNWULþQHNDEOHL]DOXPLQLMDLQDOXPLQLMHYLK]OLWLQ
6WDQGDUG]DSURL]YRG
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables -
Product standard
Luft- und Raumfahrt - Leiter aus Aluminium oder Aluminiumlegierung für elektrische
Leitungen - Produktnorm
Série aérospatiale - Conducteurs en aluminium ou en alliage d'aluminium pour câbles
électriques - Norme de produit
Ta slovenski standard je istoveten z: EN 3719:2010
ICS:
49.025.20 Aluminij Aluminium
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3719:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3719:2010

---------------------- Page: 2 ----------------------

SIST EN 3719:2010


EUROPEAN STANDARD
EN 3719

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2010
ICS 49.060 Supersedes EN 3719:2005
English Version
Aerospace series - Aluminium or aluminium alloy conductors for
electrical cables - Product standard
Série aérospatiale - Conducteurs en aluminium ou en Luft- und Raumfahrt - Leiter aus Aluminium oder
alliage d'aluminium pour câbles électriques - Norme de Aluminiumlegierung für elektrische Leitungen -
produit Produktnorm
This European Standard was approved by CEN on 4 March 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3719:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3719:2010
EN 3719:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms, definitions and symbols .4
4 Conductor materials and construction .4
4.1 Materials .4
4.2 Material for individual strands and code .4
4.3 Aluminium or aluminium alloy .5
4.4 Construction of conductors .5
4.4.1 Lay length .5
4.4.2 Joints .5
4.4.3 Compaction .5
5 Required characteristics .5
6 Test methods .6
7 Quality assurance .7
8 Designation .7
9 Marking, packaging and delivery lengths .7

2

---------------------- Page: 4 ----------------------

SIST EN 3719:2010
EN 3719:2010 (E)
Foreword
This document (EN 3719:2010) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3719:2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ic
...