SIST EN 4651:2014
(Main)Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
EN 4651 specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of copper-clad aluminium alloy (CCA) conductors, for lightweight electrical cables for aerospace applications. It applies to stranded conductors, with a nominal cross-sectional area of 0,22 mm2 to 22 mm2 inclusive.
Luft- und Raumfahrt - Leiter aus Aluminiumlegierung mit Kupferbeschichtung für elektrische Leitungen - Produktnorm
Série aérospatiale - Conducteurs en alliage d'aluminium chemisé cuivre pour câbles électriques - Norme de produit
La présente Norme européenne spécifie les dimensions, la résistance linéaire, les caractéristiques mécaniques, la construction et la masse des conducteurs en aluminium chemisés en alliage de cuivre (CCA), pour les câbles électriques allégés pour des applications aérospatiale.
Elle s’applique aux conducteurs toronnés, ayant une section nominale de 0,22 mm2 à 22 mm2 incluse.
Aeronavtika - Pobakreni vodniki iz aluminijeve zlitine za električne kable - Standard za proizvod
EN 4651 določa dimenzije, linearno odpornost, mehanske značilnosti, konstrukcijo in maso pobakrenih vodnikov iz aluminijeve zlitine za lahke električne kable za uporabo v aeronavtiki. Velja za pletene vodnike z nominalnim premerom od 0,22 mm2 do vključno 22 mm2.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leiter aus Aluminiumlegierung mit Kupferbeschichtung für elektrische Leitungen - ProduktnormSérie aérospatiale - Conducteurs en alliage d'aluminium chemisé cuivre pour câbles électriques - Norme de produitAerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard49.060Aerospace electric equipment and systems49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 4651:2014SIST EN 4651:2014en01-julij-2014SIST EN 4651:2014SLOVENSKI
STANDARD
SIST EN 4651:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4651
April 2014 ICS 49.060 English Version
Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
Série aérospatiale - Conducteurs en alliage d'aluminium chemisé cuivre pour câbles électriques - Norme de produit Luft- und Raumfahrt - Leiter aus Aluminiumlegierung mit Kupferbeschichtung für elektrische Leitungen - Produktnorm This European Standard was approved by CEN on 24 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4651:2014 ESIST EN 4651:2014
EN 4651:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Definitions and symbols .4 4 Conductor materials and construction .4 4.1 Materials .4 4.2 Metal plating .4 4.3 Characteristics .5 4.4 Construction of conductors .5 4.4.1 Lay length .5 4.4.2 Joints .6 4.4.3 Compaction .6 5 Required characteristics .6 6 Test methods .6 7 Quality assurance .7 8 Designation .7 9 Marking, packaging and delivery lengths .7
SIST EN 4651:2014
EN 4651:2014 (E) 3 Foreword This document (EN 4651:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4651:2014
EN 4651:2014 (E) 4 1 Scope This Eur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.