Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber

Created at the request of A. Ganesh (CC/010319)
* (2 Nov 2000) DOW=DAV+21 months (CEN/BT C 149/2000) - pls contact Ashok Ganesh  to check before DAV

Elastomer-Dichtungen - Werkstoff-Anforderungen für Rohrleitungs-Dichtungen für Anwendungen in der Wasserversorgung und Entwässerung - Teil 3: Zellige Werkstoffe aus vulkanisiertem Kautschuk

Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité pour joints de canalisation utilisés dans le domaine de l'eau et de l'évacuation - Partie 3: Matériaux cellulaires en caoutchouc vulcanisé

Elastomerna tesnila – Zahteve za materiale za tesnila za uporabo v napeljavah za vodo in kanalizacijo – 3. del: Celularni materiali iz vulkanizirane gume - Dopolnilo A1

General Information

Status
Published
Publication Date
30-Nov-2002
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2002
Due Date
01-Dec-2002
Completion Date
01-Dec-2002

RELATIONS

Buy Standard

Amendment
SIST EN 681-3:2000/A1:2002
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 681-3:2000/A1:2002
01-december-2002
Elastomerna tesnila – Zahteve za materiale za tesnila za uporabo v napeljavah za

vodo in kanalizacijo – 3. del: Celularni materiali iz vulkanizirane gume - Dopolnilo

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage

applications - Part 3: Cellular materials of vulcanized rubber
Elastomer-Dichtungen - Werkstoff-Anforderungen für Rohrleitungs-Dichtungen für

Anwendungen in der Wasserversorgung und Entwässerung - Teil 3: Zellige Werkstoffe

aus vulkanisiertem Kautschuk

Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures

d'étanchéité pour joints de canalisation utilisés dans le domaine de l'eau et de
l'évacuation - Partie 3: Matériaux cellulaires en caoutchouc vulcanisé
Ta slovenski standard je istoveten z: EN 681-3:2000/A1:2002
ICS:
23.040.80
SIST EN 681-3:2000/A1:2002 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 681-3:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2002
ICS 23.040.80
English version
Elastomeric seals - Material requirements for joint seals used in
water and drainage applications - Part 3: Cellular materials of
vulcanized rubber

Garnitures d'étanchéité en caoutchouc - Spécification des Elastomer-Dichtungen - Werkstoff-Anforderungen für

matériaux pour garnitures d'étanchéité pour joints de Rohrleitungs-Dichtungen für Anwendungen in der

canalisation utilisés dans le domaine de l'eau et de Wasserversorgung undEntwässerung - Teil 3: Zellige

l'évacuation - Partie 3: Matériaux cellulaires en caoutchouc Werkstoffe aus vulkanisiertem Kautschuk

vulcanisé

This amendment A1 modifies the European Standard EN 681-3:2000; it was approved by CEN on 25 February 2002.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this

amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such

national standards may be obtained on application to the Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 681-3:2000/A1:2002 E

worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 681-3:2000/A1:2002 (E)
Foreword

This document (EN 681-3:2000/A1:2002) has been prepared by Technical Committee CEN/TC 208 "Elastomeric

seals for joints in pipework and pipelines", the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical text or

by endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn at the

latest by December 2003.

This document has been prepared under a mandate given to CEN by the European Commission and the European

Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,

France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,

Sweden, Switzerland and the United Kingdom.
---------------------- Page: 3 ----------------------
EN 681-3:2000/A1:2002 (E)
Page 10, clause 5 Delete title substitute "Factory production control".
---------------------- Page: 4 ----------------------
EN 681-3:2000/A1:2002 (E)
Annex ZA
(informative)

Clauses of this European standard addressing the provisions of the EU Construction Products

Directive

ZA.1 Scope and clauses of the European standard addressing the essential characteristics of the

EU Construction Products Directive
With reference to Clause 1, this Annex ZA has the same scope as Clause 1.

This European standard has been prepared under a Mandate given to CEN by the European

Commission and the European Free Trade Association.

The clauses of this European standard shown in table ZA.1 below meet the requirements of the Mandate

given under the EU Construction Products Directive (89/106).

Compliance with these clauses confers a presumption of fitness of seals made of cellular materials of

vulcanized rubber covered by this European standard for their intended use.

WARNING: Other requirements and other EU Directives, not affecting the fitness for intended use may

be applicable to a construction product falling within the scope of this standard.

NOTE In addition to any specific clauses relating to dangerous substances contained in this Standard, there may be

other
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.