SIST EN ISO 14586:2012

Hexalobular socket countersunk head tapping screws (ISO 14586:2011)

ISO 14586:2011 specifies the characteristics of hexalobular socket countersunk head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive.
If, in special cases, specifications other than those listed in ISO 14586:2011 are required, they can be selected from existing International Standards, for example ISO 1478, ISO 2702, ISO 4759-1.

Senk-Blechschrauben mit Innensechsrund (ISO 14586:2011)

Diese Internationale Norm legt die Eigenschaften von Senk-Blechschrauben mit Innensechsrund mit Gewinde von ST2,9 bis ST6,3 fest.
Werden in besonderen Fällen andere als in dieser Internationalen Norm aufgeführte Festlegungen benötigt, können diese aus bestehenden Internationalen Normen wie zum Beispiel ISO 1478, ISO 2702 und ISO 4759 1 ausgewählt werden.

Vis à tôle à tête fraisée à six lobes internes (ISO 14586:2011)

L'ISO 14586:2011 spécifie les caractéristiques des vis à tôle à tête fraisée à six lobes internes, de filetage de diamètre ST2,9 à ST6,3 inclus.
Si, dans des cas particuliers, des spécifications autres que celles figurant dans l'ISO 14586:2011 sont requises, elles peuvent être choisies dans les Normes internationales existantes, par exemple l'ISO 1478, l'ISO 2702 et l'ISO 4759‑1.

Notranji šestrogeljnik v ugrezni glavi pločevinskega vijaka (ISO 14586:2011)

Ta mednarodni standard določa značilnosti vijakov z notranjim šestrogeljnikom v ugrezni glavi pločevinskega vijaka z velikostmi navojev od ST2,9 do vključno ST6,3. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 1478, ISO 2702, ISO 4759-1.

General Information

• Status: Published
• Publication Date: 28-Nov-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Nov-2011
• Due Date: 28-Jan-2012
• Completion Date: 29-Nov-2011
• Ref Project: EN ISO 14586:2011 - Hexalobular socket countersunk head tapping screws (ISO 14586:2011)

Relations

• Replaces: SIST EN ISO 14586:2002 - Hexalobular socket countersunk head tapping screws (ISO 14586:2001)
• Effective Date: 01-Jan-2012

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
1DGRPHãþD
SIST EN ISO 14586:2002
1RWUDQMLãHVWURJHOMQLNYXJUH]QLJODYLSORþHYLQVNHJDYLMDND,62
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
Senk-Blechschrauben mit Innensechsrund (ISO 14586:2011)
Vis à tôle à tête fraisée à six lobes internes (ISO 14586:2011)
Ta slovenski standard je istoveten z: EN ISO 14586:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14586
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2011
ICS 21.060.10 Supersedes EN ISO 14586:2001
English Version
Hexalobular socket countersunk head tapping screws (ISO
14586:2011)
Vis à tôle à tête fraisée à six lobes internes (ISO Senk-Blechschrauben mit Innensechsrund (ISO
14586:2011) 14586:2011)
This European Standard was approved by CEN on 17 January 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14586:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 14586:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at
the latest by August 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14586:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14586:2011 has been approved by CEN as a EN ISO 14586:2011 without any modification.

INTERNATIONAL ISO
STANDARD 14586
Second edition
2011-02-15
Hexalobular socket countersunk head
tapping screws
Vis à tôle à tête fraisée à six lobes internes

Reference number
ISO 14586:2011(E)
©
ISO 2011
ISO 14586:2011(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.o
...