SIST EN 1942:2008

Self adhesive tapes - Measurement of Thickness

This European Standard specifies a method on how to measure the total thickness of both the backing and adhesive layer comprising an adhesive tape.

Klebebänder - Messung der Dicke

Diese Europäische Norm legt ein Verfahren zur Messung der Gesamtdicke sowohl von dem Träger als auch
von der Klebemasse eines Klebebandes fest.

Rubans auto-adhésifs - Mesure de l'épaisseur

La présente Norme européenne spécifie une méthode permettant de mesurer l’épaisseur totale du support et de la couche adhésive constituant un ruban adhésif.

Samolepilni trakovi - Merjenje debeline

General Information

• Status: Published
• Publication Date: 07-Sep-2008
• ICS: 83.180 - Adhesives
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Sep-2008
• Due Date: 10-Nov-2008
• Completion Date: 08-Sep-2008
• Ref Project: EN 1942:2008 - Self adhesive tapes - Measurement of Thickness

Relations

• Replaces: SIST EN 1942:2003 - Self adhesive tapes - Measurement of Thickness
• Effective Date: 01-Oct-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1942:2008
01-oktober-2008
1DGRPHãþD
SIST EN 1942:2003
Samolepilni trakovi - Merjenje debeline
Self adhesive tapes - Measurement of Thickness
Klebebänder - Messung der Dicke
Rubans auto-adhésifs - Mesure de l'épaisseur
Ta slovenski standard je istoveten z: EN 1942:2008
ICS:
83.180 Lepila Adhesives
SIST EN 1942:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1942:2008

---------------------- Page: 2 ----------------------

SIST EN 1942:2008
EUROPEAN STANDARD
EN 1942
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2008
ICS 83.180 Supersedes EN 1942:2003
English Version
Self adhesive tapes - Measurement of Thickness
Rubans auto-adhésifs - Mesure de l'épaisseur Klebebänder - Messung der Dicke
This European Standard was approved by CEN on 24 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1942:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1942:2008
EN 1942:2008 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope.5
2 Terms and definitions .5
3 Significance and use .5
4 Principle.5
5 Required materials.5
6 Apparatus.5
7 Test sample and test pieces .5
8 Procedure.6
9 Expression of results.6
10 Test report.6
Annex A (informative) Identification of significant technical changes in revised European
Standard .7

2

---------------------- Page: 4 ----------------------

SIST EN 1942:2008
EN 1942:2008 (E)
Foreword
This document (EN 1942:2008) has been prepared by Technical Committee CEN/TC 253 “Self adhesive
tapes”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2008, and conflicting national standards shall be
withdrawn at the latest by September 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1942:2003.
Annex A provides details of significant technical changes between this European Standard and the previous
edition.
According to the CEN/CENELEC Internal
...