SIST EN 1902:2015
(Main)Adhesives - Test method for adhesives for floor coverings and wall coverings - Shear creep test
Adhesives - Test method for adhesives for floor coverings and wall coverings - Shear creep test
This European Standard specifies a test method that gives an assessment of adhesion under long-term shear stress after bonding floor or wall coverings to a given substrate.
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Zeitstand-Scherversuch
Diese Europäische Norm legt ein Prüfverfahren fest, das die Haftung von Boden oder Wandbelägen bewertet, die mit einem vorgegebenen Substrat verklebt und einer Langzeit Scherbeanspruchung ausgesetzt sind. Die Benennung „Wandbelag“ umfasst keine Art von Papier Wandtapeten.
Adhésifs - Méthodes d'essai des adhésifs pour revêtements muraux et de sol - Essai de fluage sous contrainte de cisaillement
La présente Norme européenne spécifie une méthode d’essai qui donne une évaluation de l'adhésion en présence d'une contrainte en cisaillement de longue durée, après collage des revêtements muraux ou de sol sur un support donné. Le terme « revêtement de mur » (ou « revêtement mural ») n’inclut aucun type de papier peint.
Lepila - Preskusna metoda za lepila za talne in stenske obloge - Dolgotrajni strižni preskus
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepila - Preskusna metoda za lepila za talne in stenske obloge - Dolgotrajni strižni preskusKlebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Zeitstand-ScherversuchAdhésifs - Méthodes d'essai des adhésifs pour revêtements muraux et de sol - Essai de fluage sous contrainte de cisaillementAdhesives - Test method for adhesives for floor coverings and wall coverings - Shear creep test83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1902:2015SIST EN 1902:2015en,fr,de01-julij-2015SIST EN 1902:2015SLOVENSKI
STANDARDSIST EN 1902:20001DGRPHãþD
SIST EN 1902:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1902
April 2015 ICS 83.180 Supersedes EN 1902:1999English Version
Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test
Adhésifs - Méthodes d'essai des adhésifs pour revêtements muraux et de sol - Essai de fluage sous contrainte de cisaillement
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Zeitstand-Scherversuch This European Standard was approved by CEN on 16 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1902:2015 ESIST EN 1902:2015
EN 1902:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Apparatus and materials .4 6 Preparation of test specimens .8 6.1 Cleaning .8 6.2 Sampling of adhesive .8 6.3 Conditioning of materials .8 6.3.1 Adhesive and floor and wall coverings .8 6.3.2 Fibre cement substrate .8 6.4 Application of adhesive .8 6.5 Bonding of the test covering .9 6.6 Conditioning of test specimens .9 7 Test procedure and evaluation of test results .9 8 Test report . 10
SIST EN 1902:2015
EN 1902:2015 (E) 3 Foreword This document (EN 1902:2015) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015 and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1902:1999. The main changes in respect to EN 1902:1999 are the following: — the change of the roller dimensions; — the change of temperature of conditioning of a substrate. SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1902:2015
EN 1902:2015 (E) 4 1 Scope This European Standard specifies a test method that gives an assessment of adhesion under long-term shear stress after bonding floor or wall coverings to a given substrate. The term “wall covering” does not include any type of wallpaper. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives - Terms and definitions EN 1067, Adhesives - Examination and preparation of samples for testing EN ISO 15605, Adhesives - Sampling (ISO 15605) EN ISO 10365, Adhesives - Designation of main failure patterns (ISO 10365) ISO 554, Standard atmospheres for conditioning and/or testing - Specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 and the following apply. 3.1 covering flexible resilient or textile floor covering or wall coveri
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepila - Preskusna metoda za lepila za talne in stenske obloge - Dolgotrajni strižni preskusKlebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Zeitstand-ScherversuchAdhésifs - Méthodes d'essai des adhésifs pour revêtements muraux et de sol - Essai de fluage sous contrainte de cisaillementAdhesives - Test method for adhesives for floor coverings and wall coverings - Shear creep test83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:FprEN 1902kSIST FprEN 1902:2014en,fr,de01-oktober-2014kSIST FprEN 1902:2014SLOVENSKI
STANDARD
kSIST FprEN 1902:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1902
August 2014 ICS 83.180 Will supersede EN 1902:1999English Version
Adhesives - Test method for adhesives for floor coverings and wall coverings - Shear creep test
Adhésifs - Méthodes d'essai des adhésifs pour revêtements muraux et de sol - Essai de fluage sous contrainte de cisaillement
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Zeitstand-Scherversuch This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 193.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1902:2014 EkSIST FprEN 1902:2014
FprEN 1902:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Apparatus and materials .4 6 Preparation of test specimens .8 6.1 Cleaning .8 6.2 Sampling of adhesive .8 6.3 Conditioning of materials .8 6.3.1 Adhesive and floor and wall coverings .8 6.3.2 Fibre cement substrate .8 6.4 Application of adhesive .8 6.5 Bonding of the test covering covering .9 6.6 Conditioning of test specimens .9 7 Test procedure and evaluation of test results .9 8 Test report . 10
kSIST FprEN 1902:2014
FprEN 1902:2014 (E) 3 Foreword This document (FprEN 1902:2014) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1902:1999. The main change in respect to EN 1902:1999 is the change of the roller dimensions. SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. kSIST FprEN 1902:2014
FprEN 1902:2014 (E) 4 1 Scope This European Standard specifies a test method that gives an assessment of adhesion under long-term shear stress after bonding floor or wall coverings to a given substrate. The term “wall covering” does not include any type of wallpaper. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives - Terms and definitions EN 1067, Adhesives - Examination and preparation of samples for testing EN ISO 15605, Adhesives - Sampling (ISO 15605) EN ISO 10365, Adhesives - Designation of main failure patterns (ISO 10365) ISO 554, Standard atmospheres for conditioning and/or testing — Specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 and the following apply. 3.1 covering flexible resilient or textile floor covering or wall covering 3.2 adhesive for coverings adhesive which is intended to produce firm and durable bonds between coverings and various substrates 4 Principle The bonding performance of a floor or wall covering/adhesive combination is assessed under exposure to a static shear force by monitoring the time until failure of the test pieces. 5 Apparatus and materials 5.1 Notched trowel, (for the shape of the notch, see Figure 1) with dimensions a, b and c specified by the adhesive manufacturer. kSIST FprEN 1902:2014
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.