SIST EN ISO 6509:1999

Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981)

The method applies to brass exposed to frech or saline waters. May be used for control or research purposes, but the field of application is not specified. The method consists of exposure of test pieces to copper(II) chloride solution followed by microscopic examination.

Korrosion von Metallen und Legierungen - Bestimmung der Entzinkungsbeständigkeit von Kupfer-Zink-Legierungen (ISO 6509:1981)

Die vorliegende Internationale Norm beschreibt ein Verfahren zur Bestimmung der Entzinkungsbeständigkeit von Kupfer-Zink-Legierungen, die Wasser oder salzhaltigen wässrigen Lösungen ausgesetzt werden. Das Verfahren kann im Rahmen einer Überprüfung oder zu Forschungßwecken verwendet werden, das Anwendungsgebiet ist jedoch nicht festgelegt.

Corrosion des métaux et alliages - Détermination de la résistance a la dézincification du laiton (ISO 6509:1981)

La présente Norme internationale spécifie une méthode de détermination de la résistance à la dézincification du laiton exposé aux eaux douces ou salées. La méthode peut servir pour le contrôle ou pour la recherche, mais le domaine d'application n'est pas spécifié.

Korozija kovin in zlitin - Ugotavljanje odpornosti razcinkanja medi (ISO 6509:1981)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-1999
• Withdrawal Date: 04-Jun-2014
• ICS: 77.060 - Corrosion of metals
• Technical Committee: IPKZ - Protection of metals against corrosion
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-Jun-2014
• Due Date: 28-Jun-2014
• Completion Date: 05-Jun-2014
• Ref Project: EN ISO 6509:1995 - Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981)

Relations

• Revises: oSIST prEN ISO 6509-2:2014 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 2: Acceptance criteria (ISO/DIS 6509-2:2014)
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN ISO 6509-2:2014 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 2: Acceptance criteria (ISO/DIS 6509-2:2014)
• Effective Date: 19-Jan-2023
• Replaced By: SIST EN ISO 6509-1:2014 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014)
• Effective Date: 08-Jun-2022
• Revises: oSIST prEN ISO 6509-2:2014 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 2: Acceptance criteria (ISO/DIS 6509-2:2014)
• Effective Date: 08-Jun-2022
• Revised: oSIST prEN ISO 6509-2:2014 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 2: Acceptance criteria (ISO/DIS 6509-2:2014)
• Effective Date: 01-Jul-2014
• Replaced By: SIST EN ISO 6509-1:2014 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014)
• Effective Date: 01-Jul-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6509:1999
01-oktober-1999
Korozija kovin in zlitin - Ugotavljanje odpornosti razcinkanja medi (ISO 6509:1981)
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO
6509:1981)
Korrosion von Metallen und Legierungen - Bestimmung der Entzinkungsbeständigkeit
von Kupfer-Zink-Legierungen (ISO 6509:1981)
Corrosion des métaux et alliages - Détermination de la résistance a la dézincification du
laiton (ISO 6509:1981)
Ta slovenski standard je istoveten z: EN ISO 6509:1995
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 6509:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6509:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 6509:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 6509:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 6509:1999
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONoME~YHAPO~HAR OPTAHM3Al#lR fl0 CTAH~APTH3A~WWORGANISATION INTERNATIONALE DE NORMALISATION
Corrosion of metals and alloys - Determination of
dezincification resistance of brass
Corrosion des mbtaux et alliages - Determination de Ia rbsistance & Ia d&incifica tion du laiton
First edition - 1981-07-01
~~~ ~~
Ref. No. ISO 65094981 (E)
UDC 669.35 : 620.193.2
w
-
determination, corrosion resistance, brasses.
Descriptors : corrosion, metals, alloys, tests,
Price based on 3 pages

---------------------- Page: 5 ----------------------

SIST EN ISO 6509:1999
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member -
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. Inteinational organizations, governmental
and non-governmental, in Iiaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 6509 was developed by Technical Committee ISO/TC 156,
Corrosion of metals and atloys, and was circulated to the member bodies in
February 1980.
lt has been approved by the member bodies of the following countries :
Australia Finland Portugal
Austria France Romania
South Africa, Rep. of
Belgium Germany, F. R.
Spain
Brazil l-lungary
Bulgaria India Sweden
Canada Mexico United Kingdom
China Norway USA
USSR
Egypt, Arab Rep. of Poland
following country expressed disapproval document
The member body
technical grounds
Czechoslovakia
0 International Organkation for Standardkation, 1981
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 6509:1999
INTERNATIONAL STANDARD ISO 65094981 (E)
Corrosion of metals and alloys - Determination of
dezincification resistance of brass
4.3 Optical microscope, with a scale.
1 Scope and field of application
This International Standard specifies a method for the deter-
mination of the dezincification resistance of brass exposed to
5 Test pieces
fresh or Saline waters.
The method may be used for control or research purposes, but
5.1 The test pieces shall be taken in such a way, for example
the field of application is not specified.
by sawing and grinding with light pressure, that the properties
of the materials are unaffected.
2 Principle
5.2 Not less than two test pieces shall be taken from each
Exposure of test pieces to copper(ll) chloride solution followed Sample supplied for testing.
by microscopic examination.
5.2.1 For forgings and castings, at least one test piece shall
be taken from the area with the thinnest section and at least
3 Reagents and materials
one from the area with the thickest section.
Use only reagents of recognized analytical grade and distilled
water or water of equivalent purity.
5.2.2 In the case of materials with a specific extrusion or roll-
ing direction, for example plates or bars, surfaces both parallel
3.1 Copperfll) chloride, 1 % (mlm) Solution, freshly
and perpendicular to the extrusion or rolling direction shall be
prepared.
tested. In addition, in the case of rods, all test pieces, whether
transverse or longitudinal, shall be tut in such a way as to in-
Dissolve 12,7 g of copper( II) chloride dihydrate ( CuClZ.2H20) in
clude Points midway between the axis and the periphery.
water and make up the volume to 1 000 ml.
5.3 The area of each test piece to be exposed shall be
3.2 Phenolic resins, or other non-conducting material with
approximately 100 mm 2. If the size of the component or the
similar properties, for embedding the test piece
...