SIST EN 13467:2002
(Main)Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation
Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation
This European Standard speci-fies the equipment and procedures for determin-ing the dimen-sions, squareness and linearity of pre-formed pipe insulation, supplied in one piece, half sections or segments. It is applicable to thermal insulat-ing products.
Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung der Maße, der Rechtwinkligkeit und der Linearität von vorgeformten Rohrdämmstoffen
Anwendungsbereich
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Maße, der Rechtwink-ligkeit und der Linearität von vorgeformten Rohrdämmstoffen, die als Vollschalen, Halbschalen oder Segmente geliefert werden, fest. Sie gilt für Wärmedämmstoffe.
Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination des dimensions, de l'équerrage et de la linéarité des coquilles isolantes préformées
La présente Norme européenne spécifie les équipements nécessaires et les procédures a suivre pour déterminer les dimensions, l'équerrage et la linéarité des coquilles fournies en une piece, en demi-sections ou sous forme de douelles. Elle s'applique aux produits isolants thermiques.
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije – Ugotavljanje mer, pravokotnosti in ravnosti predoblikovanih cevnih izolacij
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije – Ugotavljanje mer, pravokotnosti in ravnosti predoblikovanih cevnih izolacijWärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung der Maße, der Rechtwinkligkeit und der Linearität von vorgeformten RohrdämmstoffenProduits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination des dimensions, de l'équerrage et de la linéarité des coquilles isolantes préforméesThermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13467:2001SIST EN 13467:2002en01-marec-2002SIST EN 13467:2002SLOVENSKI
STANDARD
SIST EN 13467:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13467September 2001ICS 91.100.60English versionThermal insulating products for building equipment and industrialinstallations - Determination of dimensions, squareness andlinearity of preformed pipe insulationProduits isolants thermiques pour l'équipement du bâtimentet les installations industrielles - Détermination desdimensions, de l'équerrage et de la linéarité des coquillesisolantes préforméesWärmedämmstoffe für die Haustechnik und fürbetriebstechnische Anlagen - Bestimmung der Maße, derRechtwinkligkeit und der Linearität von vorgeformtenRohrdämmstoffenThis European Standard was approved by CEN on 18 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13467:2001 ESIST EN 13467:2002
EN 13467:2001 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.55Apparatus.56Test specimens.87Procedure.98Calculation and expression of results.119Accuracy of measurement.1210Test report.12TablesTable 1
Measurement and calculation of dimensions.11SIST EN 13467:2002
EN 13467:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 88 “Thermal insulatingmaterials and products”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by March 2002, and conflicting national standards shall bewithdrawn at the latest by March 2002.This European Standard is one of a series of standards which specify test methods for determiningdimensions and properties of thermal insulating materials and products. It supports a series of productstandards for thermal insulating materials and products which derive from the Council Directive of 21December 1988 on the approximation of laws, regulations and administrative provisions of the MemberStates relating to construction products (Directive 89/106/EEC) through the consideration of the essentialrequirements.This European Standard has been prepared for products used to insulate building equipment andindustrial installations, but it may also be applied to products used in other areas.No existing European Standard is superseded.This European Standard has been prepared under a mandate given to CEN by the EuropeanCommission and the European Free Trade Association, and supports essential requirements of EUDirective(s).According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13467:2002
EN 13467:2001 (E)41ScopeThis European Standard specifies the equipment and procedures for determining the dimensions,squareness and linearity of preformed pipe insulation, supplied in one piece, half sections or segments. Itis applicable to thermal insulating products.2Normative referencesThis European Standard contains no normative references.3Terms and definitionsFor the purpose of this European Standard the following terms and definitions apply (see Figures 1 and4).3.1circumference, Cthe circular length of the outer surface of the pipe insulation3.2outside diameter, Dothe linear distance between two opposite points on the outside surface of the pipe insulation measuredacross the center3.3inside diameter, Dithe linear distance between two opposite points on the inside surface of the pipe insulation measuredacross the center3.4length, lthe linear dimension measured perpendicularly to the circumference of the pipe insulation3.5thickness, dthe thickness of the insulation product measured perpendicularly between the outside and the insidesurface of the pipe insulation3.6deviation from squareness, vthe maximum distance between a product, at its end, from a line which just touches the product andwhich is perpendicular to its major axis (see Figure 4)3.7deviation from linearity, Lthe maximum distance between a plane reference surface on which the test specimen rests and theoutside surface of the pipe insulationSIST EN 13467:2002
EN 13467:2001 (E)5Dimensions in millimetresKey1Flat surface2Locations for measurements (see 7.2.23)Figure 1 - Illustration of the definitions4PrincipleDetermination of the dimensions, squareness and linearity of a pipe insulation along or at a right angle toits major axis.5Apparatus5.1
For circumference, outside and inside diameter and thickness5.1.1
Metal tape graduated in millimetres for measuring circumference and diameter.Accuracy of reading:diameterat least 1 mm,circumferenceat least 3 mm.5.1.2
Metal pipe for supporting the insulation with an outside diameter which ensures no deformation ofthe product5.1.3
Rack for supporting the metal pipe (see Figure 2).5.1.4
Thickness gauge, capable of applying a load of minimum (0,5 ± 0,05) N to a load distributingplate, diameter 50 mm. The load shall be such that no deformation of the product occurs duringmeasurement.Accuracy of reading at least 0,5 mm.5.1.5
Conical mandrel graduated in 0,5 mm intervals (see Figure 3).Accuracy of reading at least 0,5 mm.SIST EN 13467:2002
EN 13467:2001 (E)65.1.6
CaliperAccuracy of reading at least 0,1 mm.5.2
For length5.2.1
Metal tape graduated in millimetres.Accuracy of reading at least 1 mm.5.3
For deviation from squareness5.3.1 Metal square with limbs at least 500 mm long with a deviation from squareness of not more than± 0,1 mm when measured at 500 mm from the corners (see Figure 4).5.3.2
Metal tape graduated in millimetres.Accuracy of reading at least 1 mm.5.4
For deviation from linearity5.4.1
Flat surface on which the test specimen rests.5.4.2
Metal tape graduated in millimetres.Accuracy of reading at least 1 mm.5.4.3
Thickness gauge (wedgeshape), graduated in 0,5 mm (see Figure 5).Accuracy of reading at least 0,5 mm.NOTE
For all measured dimensions test equipment which provides the same result with at lea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.