SIST EN ISO 29766:2023

Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)

This European Standard specifies the equipment and procedures for determining the tensile strength of a product parallel to its faces. It is applicable to thermal insulating products.
This European Standard can be used to determine whether the product has sufficient strength to withstand stresses during transportation and application.

Wärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in Plattenebene (ISO 29766:2022)

Diese Internationale Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Zugfestigkeit eines Produkts in seiner Plattenebene fest. Diese Internationale Norm gilt für Wärmedämmstoffe.
Diese Internationale Norm kann angewendet werden, um festzustellen, ob das Produkt eine ausreichende Festigkeit besitzt, um den Belastungen bei Transport und Anwendung standzuhalten.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux faces (ISO 29766:2022)

Le présent document spécifie l’équipement et les modes opératoires permettant de déterminer la résistance à la traction d’un produit parallèlement à ses faces. Il s’applique aux produits isolants thermiques.
Le présent document peut être utilisé pour déterminer si le produit a une résistance suffisante pour supporter les contraintes pendant le transport et l’application.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje natezne trdnosti v smeri dolžine (ISO 29766:2022)

Ta evropski standard določa opremo in postopke za ugotavljanje natezne trdnosti proizvoda v smeri njegove dolžine. Uporablja se za toplotnoizolacijske proizvode.
Ta evropski standard je mogoče uporabiti za določanje tega, ali ima proizvod dovolj moči, da vzdrži napetost med prevozom in uporabo.

General Information

• Status: Published
• Public Enquiry End Date: 15-Jul-2021
• Publication Date: 09-Jan-2023
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: TOP - Thermal insulation
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 15-Dec-2022
• Due Date: 19-Feb-2023
• Completion Date: 10-Jan-2023
• Ref Project: EN ISO 29766:2022 - Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)

Relations

• Replaces: SIST EN 1608:2013 - Thermal insulating products for building applications - Determination of tensile strength parallel to faces
• Effective Date: 01-Feb-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 29766:2023
01-februar-2023
Nadomešča:
SIST EN 1608:2013
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje natezne
trdnosti v smeri dolžine (ISO 29766:2022)
Thermal insulating products for building applications - Determination of tensile strength
parallel to faces (ISO 29766:2022)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in Plattenebene
(ISO 29766:2022)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
résistance à la traction parallèlement aux faces (ISO 29766:2022)
Ta slovenski standard je istoveten z: EN ISO 29766:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN ISO 29766:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 29766:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 29766:2023


EN ISO 29766
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 1608:2013
English Version

Thermal insulating products for building applications -
Determination of tensile strength parallel to faces (ISO
29766:2022)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination de la résistance à la der Zugfestigkeit in Plattenebene (ISO 29766:2022)
traction parallèlement aux faces (ISO 29766:2022)
This European Standard was approved by CEN on 23 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29766:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 29766:2023
EN ISO 29766:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 29766:2023
EN ISO 29766:2022 (E)
European foreword
This document (EN ISO 29766:2022) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by November 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1608:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 29766:2022 has been approved by CEN as EN ISO 29766:2022 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 29766:2023

---------------------- Page: 6 ----------------------
SIST EN ISO 29766:2023
INTERNATIONAL ISO
STANDARD 29766
Second edition
2022-11
Thermal insulating products
for building applications —
Determination of tensile strength
parallel to faces
Produits isolants thermiques destinés aux applications du bâtiment —
Détermination de la résistance à la traction parallèlement aux faces
Reference number
ISO 29766:2022(E)
© ISO 2022

---------------------- Page: 7 ----------------------
SIST EN ISO 29766:2023
ISO 29766:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 29766:2023
ISO 29766:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Test specimens . 2
6.1 Dimensions of test specimens . 2
6.2 Number of test specimens . 3
6.3 Preparation of test specimens . 3
6.4 Conditioning of test specimens . 3
7 Procedure .4
7.1 Test conditions . 4
7.2 Test procedure . 4
8 Calculation and expression of results . 4
9 Accuracy of measurement.4
10 Test report . 5
iii
© ISO 2022 – All rights reserved

---------------------- Page: 9 ----------------------
SIST EN ISO 29766:2023
ISO 29766:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that com
...

SLOVENSKI STANDARD
oSIST prEN ISO 29766:2021
01-julij-2021
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje natezne
trdnosti v smeri dolžine (ISO/DIS 29766:2021)
Thermal insulating products for building applications - Determination of tensile strength
parallel to faces (ISO/DIS 29766:2021)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in Plattenebene
(ISO/DIS 29766:2021)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
résistance à la traction parallèlement aux faces (ISO/DIS 29766:2021)
Ta slovenski standard je istoveten z: prEN ISO 29766
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
oSIST prEN ISO 29766:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 29766:2021

---------------------- Page: 2 ----------------------
oSIST prEN ISO 29766:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 29766
ISO/TC 163/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-05-13 2021-08-05
Thermal insulating products for building applications —
Determination of tensile strength parallel to faces
Produits isolants thermiques destinés aux applications du bâtiment — Détermination de la résistance à la
traction parallèlement aux faces
ICS: 91.100.60
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 29766:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 29766:2021
EN ISO 29766:2008(E)
ISO/DIS 29766:2021(E)

Contents Page
Foreword .iv
Introduction.Fehler! Textmarke nicht definiert.
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Principle.1
5 Apparatus.2
6 Test specimens.2
7 Procedure.4
8 Calculation and expression of results .4
9 Accuracy of measurement.4
10 Test report.5
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
© ISO 2008 – All rights reserved iii
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 29766:2021
ISO/DIS 29766:2021(E)
Contents Page
Foreword . iv
Introduction . Fehler! Textmarke nicht definiert.
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle. 1
5 Apparatus . 2
6 Test specimens . 2
7 Procedure . 4
8 Calculation and expression of results . 4
9 Accuracy of measurement. 4
10 Test report . 5
© ISO 2021 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 29766:2021
ISO/DIS 29766:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.
This d
...