oSIST prEN 300 674-3-1 V3.0.0:2010
(Main)Intelligent Transport Systems (ITS) - Road Transport and Traffic Telematics (RTTT) - Dedicated Short Range Communications (DSRC) - Part 3-1: Technical characteristics and test methods for High Data Rate (HDR) data transmission equipment operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band
Intelligent Transport Systems (ITS) - Road Transport and Traffic Telematics (RTTT) - Dedicated Short Range Communications (DSRC) - Part 3-1: Technical characteristics and test methods for High Data Rate (HDR) data transmission equipment operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band
Adjust title to reflect passing of Work Item under TC ITS from TC ERM. Rectify minor errors in the test methods following validation of TSS&TP and ATS specs provided by STF 372. Specify missing Application test methods, and convert from ES to EN, in order to provide support for EETS as requested in draft EEC Decision on EETS.
Inteligentni transportni sistemi (ITS) - Cestna transportna in prometna telematika (RTTT) - Enouporabniška (osebna) komunikacija kratkega dosega (DSRC) - Tehnične karakteristike in preskusne metode za HDR oddajniško opremo, ki deluje v pasu 5,8 GHz, namenjenem industrijski, znanstveni in medicinski uporabi
General Information
Buy Standard
Standards Content (Sample)
Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
European Standard (Telecommunications series)
Intelligent Transport Systems (ITS);
Road Transport and Traffic Telematics (RTTT);
Dedicated Short Range Communications (DSRC);
Part 3-1: Technical characteristics and test methods for High
Data Rate (HDR) data transmission equipment operating in
the 5,8 GHz Industrial, Scientific and Medical (ISM) band
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
Reference
REN/ITS-0020014
Keywords
DSRC, ITS, protocol, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
Contents
Intellectual Property Rights . 11
Foreword . 11
Introduction . 11
1 Scope . 13
2 References . 13
2.1 Normative references . 13
2.2 Informative references . 14
3 Definitions, symbols and abbreviations . 14
3.1 Definitions . 14
3.1.1 Layer 1 definitions . 14
3.1.2 Layer 2 definitions . 18
3.1.3 Layer 7 definitions . 18
3.1.4 Security definitions . 18
3.2 Definitions from other standards . 19
3.2.1 Layer 2 related definitions . 19
3.2.2 Layer 7 related definitions . 19
3.3 Symbols . 19
3.4 Abbreviations . 20
4 General . 21
4.1 Presentation of equipment for testing purposes . 21
4.1.1 Choice of model for testing . 21
4.1.2 Choice of operating frequencies . 21
4.1.3 Testing of equipment with or without a permanent external RF port . 21
4.1.4 Equipment with a permanent internal RF port . 21
4.1.5 Equipment with a temporary RF port . 22
4.1.6 Antennas . 22
4.2 Mechanical and electrical design . 22
4.2.1 General . 22
4.2.2 Controls . 22
4.2.3 Marking . 22
4.2.3.1 Equipment identification . 22
4.2.4 Receiver data squelch . 22
4.3 Declarations by the applicant . 22
4.4 Auxiliary test equipment . 23
4.5 Interpretation of the measurement results . 23
5 Test conditions, power sources and ambient temperatures . 23
5.1 Normal and extreme test conditions . 23
5.2 External test power source. 23
5.3 Normal test conditions . 24
5.3.1 Normal temperature and humidity . 24
5.3.2 Normal test power source . 24
5.3.2.1 Mains voltage . 24
5.3.2.2 Regulated lead-acid battery power sources . 24
5.3.2.3 Other power sources . 24
5.4 Extreme test conditions . 24
5.4.1 Extreme temperatures . 24
5.4.1.1 Procedure for tests at extreme temperatures . 24
5.4.1.1.1 Procedure for equipment designed for continuous transmit operation . 24
5.4.1.1.2 Procedure for equipment designed for intermittent transmit operation . 25
5.4.1.2 Extreme temperature ranges . 25
5.4.2 Extreme test source voltages . 25
5.4.2.1 Mains voltage . 25
5.4.2.2 Lead-acid battery, regulated power sources . 25
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
5.4.2.3 Power sources using other types of batteries . 26
5.4.2.4 Other power sources . 26
6 General conditions . 26
6.1 Test signals and test modulation . 26
6.1.1 Normal test signals (wanted and unwanted signals) . 26
6.1.1.1 Signals for bit stream measurements . 27
6.1.1.2 Signal for messages . 27
6.2 Modes of operation of the transmitter . 27
6.3 Encoder for receiver measurements . 28
6.4 Facilities for access . 28
6.4.1 Analogue access . 28
6.4.2 Access points for data stream measurement . 28
6.4.3 Coupling arrangements . 29
6.4.3.1 Arrangements for measurements with continuous bit streams . 29
6.4.3.2 Arrangement for measurements with messages . 29
6.4.4 Message received indicator . 29
6.5 Test sites and general arrangements for radiated measurements . 29
6.6 Artificial antenna . 29
6.7 Test fixture . 29
6.7.1 Calibration . 30
6.7.2 Mode of use . 30
6.8 Specific RSU test conditions . 30
6.8.1 Antenna polarization . 30
6.8.2 Signal modulation . 31
6.8.3 Data coding . 31
6.8.4 Bit rate . 31
6.8.5 Angular E.I.R.P. mask . 31
6.8.6 Wake-up trigger for OBU . 31
6.9 Specific OBU test conditions . 32
6.9.1 Antenna polarization . 32
6.9.2 Modulation on carrier . 32
6.9.3 Data coding . 32
6.9.4 Use of sidebands . 32
6.9.5 Responding bit rate and sub-carrier frequencies . 32
6.9.6 Antenna characteristics . 32
7 Layer 1: Methods of measurement and limits for road side unit transmitter parameters . 33
7.1 Generalities. 33
7.2 Equivalent isotropically radiated power (e.i.r.p.) . 33
7.2.1 Definition . 33
7.2.2 Method of measurement . 33
7.2.3 Limits . 34
7.3 Frequency error . 34
7.3.1 Definition . 34
7.3.2 Method of measurement . 34
7.3.3 Limits . 34
7.4 Transmitter spectrum mask . 34
7.4.1 Definition . 34
7.4.2 Method of measurement . 35
7.4.3 Limits . 35
7.5 Modulation depth . 36
7.5.1 Definition . 36
7.5.2 Method of measurement . 36
7.5.3 Limits . 36
7.6 Eye pattern. 37
7.6.1 Definition . 37
7.6.2 Method of measurement . 37
7.6.3 Limits . 38
7.7 Spurious emissions . 38
7.7.1 Definition . 38
7.7.2 Measuring receiver . 38
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
7.7.3 Method of measurement conducted spurious emission. 38
7.7.4 Method of measurement cabinet spurious radiation . 39
7.7.5 Method of measurement radiated spurious emission . 40
7.7.6 Limits . 40
8 Layer 1: Methods of measurement and limits for road side unit receiver parameters . 40
8.1 Maximum useable sensitivity . 41
8.1.1 Definition . 41
8.1.2 Method of measurements under normal and extreme test conditions . 41
8.1.2.1 Test arrangement for equipment with integral antenna . 41
8.1.2.2 Test arrangement for equipment with antenna connector . 43
8.1.2.3 Test procedure for continuous bit streams . 43
8.1.2.4 Test procedure for messages . 44
8.1.3 Limits . 44
8.2 Error behaviour at high wanted input signals . 44
8.2.1 Definition . 44
8.2.2 Method of measurement . 44
8.2.3 Limits . 45
8.3 Degradation measurements . 45
8.3.1 Definition . 45
8.3.2 General conditions . 45
8.3.3 Co-channel rejection . 46
8.3.3.1 Definition . 46
8.3.3.2 Method of measurement . 46
8.3.3.3 Limits . 47
8.3.4 Adjacent channel selectivity . 47
8.3.4.1 Definition . 47
8.3.4.2 Method of measurement . 47
8.3.4.3 Limits . 48
8.3.5 Spurious response rejection and blocking/desensitization . 48
8.3.5.1 Definition . 48
8.3.5.2 Method of measurement . 48
8.3.5.3 Limits . 49
8.3.6 Intermodulation response rejection . 49
8.3.6.1 Definition . 49
8.3.6.2 Method of measurement . 49
8.3.6.3 Limits . 50
8.4 Spurious emissions . 50
8.4.1 Definition . 50
8.4.2 Method of measurement - conducted spurious emissions . 50
8.4.3 Method of measurement - cabinet radiation . 51
8.4.4 Method of measurement - radiated spurious components . 51
8.4.5 Limits . 52
9 Layer 1: Method of measurements and limits for on-board units . 52
9.1 OBU sensitivity . 52
9.1.1 Definition . 52
9.1.2 Method of measurement . 52
9.1.3 Limits . 53
9.2 On board unit access. 53
9.2.1 Definition . 53
9.2.2 Method of measurement . 53
9.2.3 Limits . 55
9.3 Transponder conversion gain . 55
9.3.1 Definition . 55
9.3.2 Method of measurement . 55
9.3.3 Limits . 57
9.4 OBU maximum radiated subcarrier . 57
9.4.1 Definition . 57
9.4.2 Method of measurement .
...
SLOVENSKI STANDARD
oSIST prEN 300 674-3-1 V3.0.0:2010
01-september-2010
,QWHOLJHQWQLWUDQVSRUWQLVLVWHPL ,76 &HVWQDWUDQVSRUWQDLQSURPHWQDWHOHPDWLND
5777 (QRXSRUDEQLãND RVHEQD NRPXQLNDFLMDNUDWNHJDGRVHJD '65&
7HKQLþQHNDUDNWHULVWLNHLQSUHVNXVQHPHWRGH]D+'5RGGDMQLãNRRSUHPRNLGHOXMH
YSDVX*+]QDPHQMHQHPLQGXVWULMVNL]QDQVWYHQLLQPHGLFLQVNLXSRUDEL
Intelligent Transport Systems (ITS) - Road Transport and Traffic Telematics (RTTT) -
Dedicated Short Range Communications (DSRC) - Part 3-1: Technical characteristics
and test methods for High Data Rate (HDR) data transmission equipment operating in
the 5,8 GHz Industrial, Scientific and Medical (ISM) band
Ta slovenski standard je istoveten z: EN 300 674-3-1 Version 3.0.0
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
oSIST prEN 300 674-3-1 V3.0.0:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 300 674-3-1 V3.0.0:2010
---------------------- Page: 2 ----------------------
oSIST prEN 300 674-3-1 V3.0.0:2010
Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
European Standard (Telecommunications series)
Intelligent Transport Systems (ITS);
Road Transport and Traffic Telematics (RTTT);
Dedicated Short Range Communications (DSRC);
Part 3-1: Technical characteristics and test methods for High
Data Rate (HDR) data transmission equipment operating in
the 5,8 GHz Industrial, Scientific and Medical (ISM) band
---------------------- Page: 3 ----------------------
oSIST prEN 300 674-3-1 V3.0.0:2010
2 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
Reference
REN/ITS-0020014
Keywords
DSRC, ITS, protocol, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 300 674-3-1 V3.0.0:2010
3 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
Contents
Intellectual Property Rights . 11
Foreword . 11
Introduction . 11
1 Scope . 13
2 References . 13
2.1 Normative references . 13
2.2 Informative references . 14
3 Definitions, symbols and abbreviations . 14
3.1 Definitions . 14
3.1.1 Layer 1 definitions . 14
3.1.2 Layer 2 definitions . 18
3.1.3 Layer 7 definitions . 18
3.1.4 Security definitions . 18
3.2 Definitions from other standards . 19
3.2.1 Layer 2 related definitions . 19
3.2.2 Layer 7 related definitions . 19
3.3 Symbols . 19
3.4 Abbreviations . 20
4 General . 21
4.1 Presentation of equipment for testing purposes . 21
4.1.1 Choice of model for testing . 21
4.1.2 Choice of operating frequencies . 21
4.1.3 Testing of equipment with or without a permanent external RF port . 21
4.1.4 Equipment with a permanent internal RF port . 21
4.1.5 Equipment with a temporary RF port . 22
4.1.6 Antennas . 22
4.2 Mechanical and electrical design . 22
4.2.1 General . 22
4.2.2 Controls . 22
4.2.3 Marking . 22
4.2.3.1 Equipment identification . 22
4.2.4 Receiver data squelch . 22
4.3 Declarations by the applicant . 22
4.4 Auxiliary test equipment . 23
4.5 Interpretation of the measurement results . 23
5 Test conditions, power sources and ambient temperatures . 23
5.1 Normal and extreme test conditions . 23
5.2 External test power source. 23
5.3 Normal test conditions . 24
5.3.1 Normal temperature and humidity . 24
5.3.2 Normal test power source . 24
5.3.2.1 Mains voltage . 24
5.3.2.2 Regulated lead-acid battery power sources . 24
5.3.2.3 Other power sources . 24
5.4 Extreme test conditions . 24
5.4.1 Extreme temperatures . 24
5.4.1.1 Procedure for tests at extreme temperatures . 24
5.4.1.1.1 Procedure for equipment designed for continuous transmit operation . 24
5.4.1.1.2 Procedure for equipment designed for intermittent transmit operation . 25
5.4.1.2 Extreme temperature ranges . 25
5.4.2 Extreme test source voltages . 25
5.4.2.1 Mains voltage . 25
5.4.2.2 Lead-acid battery, regulated power sources . 25
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 300 674-3-1 V3.0.0:2010
4 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
5.4.2.3 Power sources using other types of batteries . 26
5.4.2.4 Other power sources . 26
6 General conditions . 26
6.1 Test signals and test modulation . 26
6.1.1 Normal test signals (wanted and unwanted signals) . 26
6.1.1.1 Signals for bit stream measurements . 27
6.1.1.2 Signal for messages . 27
6.2 Modes of operation of the transmitter . 27
6.3 Encoder for receiver measurements . 28
6.4 Facilities for access . 28
6.4.1 Analogue access . 28
6.4.2 Access points for data stream measurement . 28
6.4.3 Coupling arrangements . 29
6.4.3.1 Arrangements for measurements with continuous bit streams . 29
6.4.3.2 Arrangement for measurements with messages . 29
6.4.4 Message received indicator . 29
6.5 Test sites and general arrangements for radiated measurements . 29
6.6 Artificial antenna . 29
6.7 Test fixture . 29
6.7.1 Calibration . 30
6.7.2 Mode of use . 30
6.8 Specific RSU test conditions . 30
6.8.1 Antenna polarization . 30
6.8.2 Signal modulation . 31
6.8.3 Data coding . 31
6.8.4 Bit rate . 31
6.8.5 Angular E.I.R.P. mask . 31
6.8.6 Wake-up trigger for OBU . 31
6.9 Specific OBU test conditions . 32
6.9.1 Antenna polarization . 32
6.9.2 Modulation on carrier . 32
6.9.3 Data coding . 32
6.9.4 Use of sidebands . 32
6.9.5 Responding bit rate and sub-carrier frequencies . 32
6.9.6 Antenna characteristics . 32
7 Layer 1: Methods of measurement and limits for road side unit transmitter parameters . 33
7.1 Generalities. 33
7.2 Equivalent isotropically radiated power (e.i.r.p.) . 33
7.2.1 Definition . 33
7.2.2 Method of measurement . 33
7.2.3 Limits . 34
7.3 Frequency error . 34
7.3.1 Definition . 34
7.3.2 Method of measurement . 34
7.3.3 Limits . 34
7.4 Transmitter spectrum mask . 34
7.4.1 Definition . 34
7.4.2 Method of measurement . 35
7.4.3 Limits . 35
7.5 Modulation depth . 36
7.5.1 Definition . 36
7.5.2 Method of measurement . 36
7.5.3 Limits . 36
7.6 Eye pattern. 37
7.6.1 Definition . 37
7.6.2 Method of measurement . 37
7.6.3 Limits . 38
7.7 Spurious emissions . 38
7.7.1 Definition . 38
7.7.2 Measuring receiver . 38
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 300 674-3-1 V3.0.0:2010
5 Draft ETSI EN 300 674-3-1 V3.0.0 (2010-06)
7.7.3 Method of measurement conducted spurious emission. 38
7.7.4 Method of measurement cabinet spurious radiation . 39
7.7.5 Method of measurement radiated spurious emission . 40
7.7.6 Limits . 40
8 Layer 1: Methods of measurement and limits for road side unit receiver parameters . 40
8.1 Maximum useable sensitivity . 41
8.1.1 Definition . 41
8.1.2 Method of measurements under normal and extreme test conditions . 41
8.1.2.1 Test arrangement for equipment with integral antenna . 41
8.1.2.2 Test arrangement for equipment with antenna connector . 43
8.1.2.3 Test procedure for continuous bit streams . 43
8.1.2.4 Test procedure for messages . 44
8.1.3 Limits . 44
8.2 Error behaviour at high wanted input signals . 44
8.2.1 Definition . 44
8.2.2 Method of measurement . 44
8.2.3 Limits . 45
8.3 Degradation measurements . 45
8.3.1 Definition . 45
8.3.2 General conditions . 45
8.3.3 Co-channel rejection . 46
8.3.3.1 Definition . 46
8.3.3.2 Method of measurement . 46
8.3.3.3 Limits . 47
8.3.4 Adjacent channel selectivity . 47
8.3.4.1 Definition . 47
8.3.4.2 Method of measurement . 47
8.3.4.3 Limits . 48
8.3.5 Spurious response rejection and blocking/desensitization . 48
8.3.5.1 Definition . 48
8.3.5.2 Method of measurement . 48
8.3.5.3 Limits . 49
8.3.6 Intermodulation response rejection . 49
8.3.6.1 Definition . 49
8.3.6.2 Method of measurement . 49
8.3.6.3 Limits . 50
8.4 Spurious emissions . 50
8.4.1 Definition . 50
8.4.2 Method of measurement - conducted spurious emissions . 50
8.4.3 Method of measurement - cabinet radiation . 51
8.4.4 Method of measurement - radiated spurious components . 51
8.4.5 Limits . 52
9 Layer 1: Method of measurements and limits for on-board units . 52
9.1 OBU sensitivity . 52
9.1.1 Definition . 52
9.1.2 Method of measurement . 52
9.1.3 Limits . 53
9.2 On board unit access. 53
9.2.1 Definition . 53
9.2.2 Method of measurement .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.