CEN/TC 207/WG 8 - Hardware for furniture

This document specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results are only used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested.
Ageing and influences of heat and humidity are not included.

This document specifies requirements and test methods for the determination of the strength, durability and stiffness of star bases for use for seating with three or more legs.
It is not applicable for star bases intended to be used in child seating products.
It is applicable without regard to materials, design/construction or manufacturing processes.
It is a component standard helping to regulate star-base properties between component manufacturer and manufacturer of final seating. This document is not relevant for the final consumer where standards for complete articles exist.
The requirements are based upon star bases fitted with glides and with castors whose wheels are up to 65 mm diameter and for use by persons weighing up to 150 kg.

This document specifies test methods for the strength and overload tests of connectors for furniture constructed from panel material and procedures for evaluating test results.
This document is specifically intended for assessing cabinet connectors for carcases made of wood-based panel materials. The methods described can, however, be used to assess the relative performance of other types of connectors, e.g. some types of connectors for beds.
The strength and overload tests only apply to the connectors and their components, as well as the mounting to and in the cabinet carcase. They do not apply to additional functions that the connector can have, e.g. covering of the connector.
The tests described in this document are carried out according to a test setup with specified properties and characteristics.
The test results are only valid for the connector tested. The results can be used to represent the performance of production models, provided the tested model is representative of the production model.
Aging and the influences of temperature and humidity are not included. This document contains four informative annexes, providing additional methodologies for the detailed evaluation of the test results and a procedure for comparing the tested connector with a reference connector:
-   Annex A (informative) Reference connector - Glued dowel;
-   Annex B (informative) Ratio generation;
-   Annex C (informative) Stiffness calculation for further evaluation of the overload;
-   Annex D (informative) Evaluation by the characteristic value (5 % percentile).

This document specifies test methods for the determination of corrosion resistance of furniture fittings as ready-to-use assemblies or their individual parts.
It applies to the optical assessment of surface changes for the following materials:
-   metals and their alloys;
-   metal coatings with anodic or cathodic properties;
-   conversion coatings;
-   anodic oxide layers;
-   organic coatings on metallic materials.
This document does not include any requirements regarding the corrosion resistance of furniture fittings. These can be given in the product specifications.

This document specifies test methods for the verification of the loading capacity of all types of wall attachment devices for storage furniture and their components.
It does not apply to devices intended to prevent the overturning of storage furniture.
The tests consist of the application of loads and forces simulating normal functional use, as well as misuse that might reasonably be expected to occur.
With the exception of the corrosion test in 6.3, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The tests can be applied to the part attached to the furniture alone or to the combination of the part attached to the furniture and the part attached to the wall. The attachment into the wall is not included.
The strength tests are carried out in a test frame with specified properties.
The test results are only valid for the devices tested. These results can be used to represent the performance of production model, provided that the tested model is representative of the production model.
With the exception of the corrosion test, ageing and influences of temperature and humidity are not included.
Annex A (normative) includes requirements for product information.
Annex B (informative) includes a method for the determination of loading capacity.
Annex C (informative) includes an approximate calculation of vertical and horizontal forces.

This European Standard specifies test methods and requirements for the strength and durability of tapered pressure tubes for self-supporting gas springs for the height adjustment in seating.
Annex A (normative) contains product information.
Annex B (informative) contains a guide for choosing the correct strength class.

This European Standard specifies test methods for the verification of the loading capacity of shelf supports.
This standard does not apply to ceiling attached shelf support systems.
The tests consist of the application of vertical loads and forces simulating normal functional use, as well as misuse that might reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength tests include only the shelf supports and their components as well as the attachment to the cabinet and/or to the wall. If the shelf support has additional functions, e.g. as a connector or as an extension element, these are not covered by this standard.
The test results are only valid for the shelf supports tested. The results may be used to represent the per-formance of production models provided that the tested model is representative of the production model.
The test results can only be used as a guide to the performance of the shelf supports.
With the exception of the corrosion test, ageing and influences of temperature and humidity are not included.
Annex A (normative) includes requirements for product information.
Annex B (normative) includes test parameters.
Annex C (informative) includes method for the determination of loading capacity.

This European Standard specifies test methods and requirements for the strength and durability of all types of locking mechanisms for furniture and their components for all fields of application.
This European Standard does not apply to latching mechanisms.
The tests consist of the application of loads, forces simulating normal functional use, as well as misuse that might reasonably be expected to occur.
With the exception of the corrosion test in 6.5, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the locking mechanisms and their components and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in particle board with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the locking mechanisms and their components tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
With the exception of corrosion, ageing and influences of heat and humidity is not included.
Annex A (normative): Product information system.
Annex B (normative): Test parameters.

This European Standard specifies test methods and requirements for the strength and durability of all hinges, stays and systems which include hinges and stays pivoting on a horizontal axis and their components for all fields of application.
It does not apply to systems intended for storage functions.
This standard does not apply to electrically actuated systems.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the hinges and the parts used for the attachment, e.g. mounting plates and screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the hinges tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
With the exception of corrosion, ageing and the influence of heat and humidity are not included.
Annex A (normative): requirements for product information.
Annex B (normative): loads and cycles.

This Technical Report specifies terms for all types of locking mechanisms for all fields of application.
With the aid of figures it establishes different types, with the aim of facilitating comprehension of the technical language.

This European Standard EN 15706 specifies test methods and requirements for the strength and durability of all types of slide fittings for all types of sliding doors and roll fronts sliding horizontally and vertically and their components for all fields of application.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
With the exception of the corrosion test in Clause 8, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the fittings and the parts used for the attachment.
The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the fittings tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
With the exception of the corrosion test in Clause 8, ageing and influences of heat and humidity are not included.
Annex A (normative): Product information system.
Annex B (normative): Test parameters.

This European Standard specifies test methods and requirements for the strength and durability of all types of hinges pivoting on a vertical axis and their components for all fields of application.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
With the exception of the corrosion test in Clause 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the hinges and the parts used for the attachment, e.g. mounting plates and screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the hinges tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
With the exception of corrosion, ageing and the influence of heat and humidity are not included.
Annex A (normative): Requirements for product information.
Annex B (normative): Loads and cycles.

This European Technical Report specifies terms for all types of slide fittings for sliding doors and roll fronts for
all fields of application.
With the aid of figures it establishes different types, with the aim of facilitating comprehension of the technical
language.

ThThis Technical Report specifies terms for all types of hinges and their components for all fields of application.
With the aid of figures it establishes different types, with the aim of facilitating understanding the technical language.

This European Technical Report specifies terms for all types of extension elements and their components for all fields of application, except table extensions.
With the aid of figures it establishes different types, with the aim of facilitating understanding the technical language.

This European Standard specifies test methods for the verification of the loading capacity of all types of wall attachment devices for storage furniture and their components for all fields of application. It does not apply to devices intended to prevent the overturning of storage furniture. The tests consist of the application of loads and forces simulating normal functional use, as well as misuse that might reasonably be expected to occur. With the exception of the corrosion test in 6.3, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The tests can be applied to the part attached to the furniture alone or to the combination of the part attached to the furniture and the part attached to the wall. The attachment into the wall is not included. The strength tests are carried out in a test frame with specified properties. The test results are only valid for the devices tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. With the exception of the corrosion test, ageing and influences of temperature and humidity are not included. Annex A (normative) includes requirements for product information. Annex B (informative) includes a method for the determination of loading capacity.

The existing standard shall be amended by a new annex A to align it with other product standards within the scope of WG 8.

This European Standard specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
Ageing and influences of heat and humidity are not included.

This European Standard specifies test methods for the verification of the loading capacity of all types of wall attachment devices for storage furniture and their components for all fields of application.
It does not apply to devices intended to prevent the overturning of storage furniture.
The tests consist of the application of loads and forces simulating normal functional use, as well as misuse that might reasonably be expected to occur.
With the exception of the corrosion test in 6.3, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The tests can be applied to the part attached to the furniture alone or to the combination of the part attached to the furniture and the part attached to the wall. The attachment into the wall is not included.
The strength tests are carried out in a test frame with specified properties.
The test results are only valid for the devices tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
With the exception of the corrosion test, ageing and influences of temperature and humidity are not included.
Annex A (normative) includes requirements for product information.
Annex B (informative) includes a method for the determination of loading capacity.

This European Standard specifies test methods for the verification of the loading capacity of all types of wall attachment devices for storage furniture and their components for all fields of application.
It does not apply to devices intended to prevent the overturning of storage furniture.
The tests consist of the application of loads and forces simulating normal functional use, as well as misuse that might reasonably be expected to occur.
With the exception of the corrosion test in 6.3, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The tests can be applied to the part attached to the furniture alone or to the combination of the part attached to the furniture and the part attached to the wall. The attachment into the wall is not included.
The strength tests are carried out in a test frame with specified properties.
The test results are only valid for the devices tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
With the exception of the corrosion test, ageing and influences of temperature and humidity are not included.
Annex A (normative) includes requirements for product information.
Annex B (informative) includes a method for the determination of loading capacity.

This European Standard specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
Ageing and influences of heat and humidity are not included.