EN 15939:2011/FprA1

Hardware for furniture - Strength and loading capacity of wall attachment devices

This European Standard specifies test methods for the verification of the loading capacity of all types of wall attachment devices for storage furniture and their components for all fields of application. It does not apply to devices intended to prevent the overturning of storage furniture. The tests consist of the application of loads and forces simulating normal functional use, as well as misuse that might reasonably be expected to occur. With the exception of the corrosion test in 6.3, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The tests can be applied to the part attached to the furniture alone or to the combination of the part attached to the furniture and the part attached to the wall. The attachment into the wall is not included. The strength tests are carried out in a test frame with specified properties. The test results are only valid for the devices tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. With the exception of the corrosion test, ageing and influences of temperature and humidity are not included. Annex A (normative) includes requirements for product information. Annex B (informative) includes a method for the determination of loading capacity.

Möbelbeschläge - Festigkeit und Tragfähigkeit von Schrankaufhängern

Quincaillerie d'ameublement - Résistance mécanique et capacité de charge des dispositifs de fixation au mur

Pohištveno okovje - Trdnost in nosilnost stenskih omaric - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 97.140 - Furniture
• Technical Committee: CEN/TC 207 - Furniture
• Drafting Committee: CEN/TC 207/WG 8 - Hardware for furniture
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 13-Nov-2013
• Due Date: 20-Sep-2014
• Completion Date: 13-Nov-2013
• Ref Project: SIST EN 15939:2012/kFprA1:2013 - Hardware for furniture - Strength and loading capacity of wall attachment devices

Relations

• Merged Into: EN 15939:2011+A1:2014 - Hardware for furniture - Strength and loading capacity of wall attachment devices
• Effective Date: 27-Nov-2013
• Amends: EN 15939:2011 - Hardware for furniture - Strength and loading capacity of wall attachment devices
• Effective Date: 09-Jan-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2013
Pohištveno okovje - Trdnost in nosilnost stenskih omaric - Dopolnilo A1
Hardware for furniture - Strength and loading capacity of wall attachment devices
Möbelbeschläge - Festigkeit und Tragfähigkeit von Schrankaufhängern
Quincaillerie d'ameublement - Résistance mécanique et capacité de charge des
dispositifs de fixation au mur
Ta slovenski standard je istoveten z: EN 15939:2011/FprA1
ICS:
97.140 Pohištvo Furniture
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 15939:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
June 2013
ICS 97.140
English Version
Hardware for furniture - Strength and loading capacity of wall
attachment devices
Quincaillerie d'ameublement - Résistance mécanique et Möbelbeschläge - Festigkeit und Tragfähigkeit von
capacité de charge des dispositifs de fixation au mur Schrankaufhängern
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 207.
This draft amendment A1, if approved, will modify the European Standard EN 15939:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15939:2011/FprA1:2013: E
worldwide for CEN national Members.

Contents
Page
Foreword . 3
1 Modification to Foreword . 4
2 Modification to Clause 2 . 4
3 Modifications to Clause 3 . 4
4 Modification to Clause 4 . 4
5 Modifications to Clause 5 . 5
6 Modifications to Clause 6 .
...