CEN/TC 142/WG 8 - Tooling

This European Standard specifies all hazards arising from the use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted), integrated tools and circular saw blades.

This European Standard specifies the determination of the maximum speed for given eccentricity at clamping devices for the shank strength of milling tools with cylindrical and taper shank. It also specifies the marking of the tool. Bore mounted tools which are mounted on an arbor shall be considered as a shank mounted tool.

This European Standard specifies all hazards arising from the use of clamping devices for the fastening of milling tools and circular saw blades on woodworking machines and specifies the methods for the elimination or reduction of these hazards by the design of the clamping device and by the provision of information.
This European Standard does not apply to arbors for spindle moulding machines in accordance with EN 848 1 or to clamping flanges for circular sawing blades to be used on circular sawing machines in accordance with the standard series EN 1870 and does not cover hazard related to the connection of the clamping device with the machine.
Bore mounted tools which are mounted on an interchangeable arbor should be considered as a shank mounted tool.
NOTE   For definition of "woodworking machines", see EN 847 1.

This European Standard specifies the determination of the maximum speed for given eccentricity at clamping devices for the shank strength of milling tools with cylindrical and taper shank. It also specifies the marking of the tool. Bore mounted tools which are mounted on an arbor should be considered as a shank mounted tool.
This European Standard complements EN 847 1 and applies also for shank tools with a cutting diameter of less than 16 mm.

This European Standard specifies all hazards arising from the use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This European Standard deals with milling tools (bore mounted, shank mounted), integrated tools and circular saw blades.
This European Standard does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 4. This European Standard does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

This document applies to hazards arising from the design and application of clamping devices for the fastening of milling tools and circular saw blades on woodworking machines and specifies the methods for the elimination or reduction of these hazards by the design of the clamping device and by the provision of information. This document does not apply to arbors for spindle moulding machines in accordance with EN 848 1 as well as clamping flanges for circular sawing blades to be used on circular sawing machines in accordance with the standard series EN 1870 and does not cover hazard related to the connection of the clamping device with the machine. Bore mounted tools which are mounted or clamped on an adapter, an arbor or a mandrel shall be considered as a shank mounted tool.
NOTE   Definition of woodworking machines see EN 847 1.

This European Standard defines the determination of the maximum speed for given eccentricity at clamping devices for the shank strength of milling tools with cylindrical shank. It shall be applied to shank mounted milling tools for woodworking irrespective whether they are mounted perpendicularly or horizontally.  This standard shall be used as a complement of EN847-1. The design of this type of shank mounted milling tools shall be in accordance with the relevant clauses of EN847-1.

This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

This standard is applicable to all hazards arising from the design and use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. Part 1 of the standard deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shankmounted milling tools. The hazards are listed in clause 5.

This European Standard defines the determination of the maximum speed for given eccentricity at clamping devices for the shank strength of milling tools with cylindrical shank. It shall be applied to shank mounted milling tools for woodworking irrespective whether they are mounted perpendicularly or horizontally. This standard shall be used as a complement of EN 847-1. The design of this type of shank mounted milling tools shall be in accordance with the relevant clauses of EN 847-1.