CEN/TC 248/WG 31 - Smart textiles

This document provides definitions in the field of electronic textiles (e-textiles) and electronic textile systems, as well as the categorization of different types of electronic textiles and electronic textile systems. It briefly describes the current stage of development of these products and their application potential and gives indications on preferential standardization needs.
This document will also provide guidelines to determine general verification of claimed performance, innocuousness, durability of properties, product information and environmental aspects of textile electronics.
This document is not intended for products which are placed inside or are (permanently) attached to the human body. It also does not specifically address the electronics information communication link between the textile with integrated electronics and external data processing. This document therefore also does not focus on the design of software to be implemented in electronic textiles of textile systems.

This document describes the measurement for the determination of the sheet resistance of conductive textile structures or conductive structures by using eddy current technology in reflection mode setup/ arrangement.
It is applicable to conductive textile structures or conductive structures intended for application in/to textiles in the form of sheets (woven fabric, knitted fabric, nonwoven, coated fabric) where the area is formed by intersecting surfaces having conductive textile material.
It is also applicable to multilayer structures containing both insulating and conductive layers.

This document provides definitions in the field of "smart" textiles and textile products as well as a categorization of different types of smart textiles. It describes briefly the current stage of development of these products and their application potential and gives indications on preferential standardization needs.

This part of EN 16806 specifies a test method for the determination of the heat storage and heat release capacity and the phase change temperatures of textile fibres, yarns and fabrics (woven and knitted fabrics, nonwovens) containing phase change materials (PCM). The test method can also be applied for pure or micro-encapsulated PCM.
This part of EN 16806 does not apply to the determination of the heat transfer properties of textile fabrics (woven and knitted fabrics, nonwovens) containing phase change materials, for which part 2 of EN 16806 applies.
This part of EN 16806 does not apply to determining the heat transfer between the user and the product for textile products, e.g. garments, mattresses, etc. made with PCM containing materials, for which part 3 of EN 16806 applies.

This European Standard describes a test method for the determination of the linear electric resistance of conductive tracks for textile structures or intended for application in/ to textiles, e.g. yarns, printed or coated tracks, ropes, ribbons and webbing.
This European Standard is designed for materials showing ohmic behaviour.
This European Standard is designed for conductive tracks where electrical contact between the measurement electrodes and the conductive track is possible.

This document specifies a test method for determining the screen touch property of the textiles. The method is applicable to all types of fabrics which are intended to be used for products that could handle the screen.

This Technical Report provides definitions in the field of "smart" textiles and textile products as well as a categorisation of different types of smart textiles. It describes briefly the current stage of development of these products and their application potential and gives indications on preferential standardization needs.