This document specifies general requirements for instrumentation and specific requirements for process control and automation systems on wastewater treatment plants for more than 50 PT.
NOTE 1   Because of the rapid rate of development of sensor and control equipment, this document is intended as an overview and uses examples and general requirements, not detailed equipment specifications. Detailed information additional to that contained in this document can be obtained by referring to the Bibliography.
NOTE 2   Although EC directives become matters of law in member states of the EU and some other situations, this standard is intended for wider use and hence those directives with clear technical guidance of a type that would generally be appropriate in a standard are referenced in the text and listed in the Bibliography. The alternative of listing requirements copied from directives would potentially create unacceptable conflict when directives are revised.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies design principles and performance requirements for preliminary wastewater treatment using screens with a mesh size above 50 μm, at plants serving more than 50 PT. It also includes grit removal and grease separation.
NOTE 1   For micro-screens with a mesh size below 50 microns see EN 12255-16.
NOTE 2   The primary application of this document is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater. However, it contains information that can also be useful for commercial and industrial wastewater pretreatment and for combined sewer overflows (CSO).
This document applies in combination with EN 12255-1 and EN 12255-10.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies design principles and performance requirements for odour control and associated ventilation for wastewater treatment plants serving more than 50PT.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for chemical treatment of wastewater by precipitation/flocculation for removal of phosphorus and suspended solids.
The application of polymers is not described in this document.
Differences in wastewater treatment throughout Europe have led to a variety of practices being developed. This document gives fundamental information about the practices; this standard has not attempted to specify all available practices.
NOTE Chemical treatment can be performed in combination with primary and more commonly with secondary treatment, but it can also be performed as separate tertiary treatment, usually in combination with filtration (see EN 12255-16). Chemical treatment can provide a potential contribution to the circular economy through the recovery of materials, such as phosphorus, from wastewater or sludge.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies design principles and performance requirements for disinfection of effluents (excluding sludge) at wastewater treatment plants serving more than 50 PT.
NOTE   Sludge disinfection is described in EN 12255-8.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies performance requirements for treatment of wastewater using the activated sludge process for plants over 50 PT.
The informative Annexes A to W provide design information.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines minimum safety requirements to be observed in the planning, construction or reconstruction of wastewater treatment plants.
The purpose of this document is to ensure the protection of people.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the design requirements for plant and equipment to remove solids, other than screenings and grit, from raw wastewater, at wastewater treatment plants for over 50 PT.
It includes primary treatment with sedimentation, fine screens and micro-screens.
NOTE 1   The removal of screenings and grit is covered in EN 12255-3.
NOTE 2   Dissolved air flotation (DAF) is not covered in detail in this document because it is not commonly used for primary treatment in municipal wastewater treatment plants. It can be used for primary treatment of industrial wastewater, but then the design is specific to the application.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies data which is necessary for the planning, design, bidding, performance guarantees, construction, start-up and compliance testing of a wastewater treatment plant or parts of it. This document gives fundamental information about the practices; this document has not attempted to specify all available practices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies design principles and performance requirements for tertiary clarification (receiving effluent from secondary treatment) by physical filtration plant at wastewater treatment plants serving more than 50 PT.
NOTE 1 Ultrafiltration, nanofiltration and reverse osmosis are not covered within the scope of this document as they are not considered to be used for tertiary clarification.
NOTE 2 Soil filtration is not covered in this document.
NOTE 3 Activated carbon filtration is excluded from the scope of this document as it is not considered to be a form of mechanical filtration.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines a methodology for determining and assessing the energy efficiency of Waste Water Treatment Plants (WWTP). The methodology aims at describing, in a systematic way, the various steps required to establish the Water Treatment Energy Index (WTEI) of a particular WWTP.
The methodology includes the classification of WWTPs in different types, identification of different stages of treatment, identification of key performance indicators (KPIs), overview of existing energy monitoring standards and the detailed description of the methodology, including a step by step guideline of how to apply and implement it.
The methodology is divided in 2 sub-methods that should be selected and followed according to the following goals:
- The Rapid Audit (RA) method allows for a quick estimation of the water treatment energy index (WTEI) based on existing information such as historical data pertaining to energy use records along with influent and effluent quality values. The aim of this methodology is to provide a WWTP energy benchmark, a rapid tool to identify energy efficiencies and inefficiencies so further actions can be planned, as well as to evaluate the impact of WWTP retrofitting.
The Rapid Audit methodology is detailed step by step in Clause 4 of this TR and can be used as a standalone document. The application of the Rapid Audit methodology to one real WWTP is shown in Annex A.
- The Decision Support (DS) method requires intensive monitoring across a WWTP of energy usage and water quality parameters that provides an accurate and detailed calculation of WTEI for each stage as well as its overall value for the plant. The goal of this assessment is to serve as a diagnosis of the functions/equipment in a plant that may lead to poor energy efficiency performance.
The Decision Support methodology is detailed step by step in Clause 5 of this TR and can be used as a standalone document. The application of the Decision Support methodology to one real WWTP is shown in Annex B.

  • Technical report
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Report defines terms commonly used in the field of membrane bioreactor technology.
This document aims at submerged MBR systems for the treatment of municipal wastewater with MBR Separate Systems and MBR Integrated Systems.
This document establishes general principles for MBR filtration systems interchangeability between different MBR filtration systems from different manufacturers.

  • Technical report
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European standard specifies the non-steady state measurement of the oxygen transfer capacity and the oxygen transfer efficiency of aeration tanks (see prEN 12255-6) when filled with clean water. NOTE 1: This is known as the clean water test. NOTE 2: Since the method is based on completely mixed tanks or tanks with evenly distributed aerators or diffusers it may not be applicable for certain aeration installations. NOTE 3: Under process conditions with mixed liquor the oxygen transfer capacity and the oxygen transfer efficiency may be different from the clean water test results.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for structures and equipment as they relate to wastewater treatment plants for a total population of more than 50 PT.
The primary application is designed for wastewater treatment plants for the treatment of domestic and municipal wastewater.
Requirements for structures which are not specific for wastewater treatment plants are not within the scope of this European Standard. Other ENs can apply.
Equipment which is not solely used in wastewater treatment plants is subject to the applicable product standards. However, specific requirements for such equipment when used in wastewater treatment plants are included in this part.
General principles of building construction, mechanical and electrical engineering are not subject of this standard.
This European Standard does not cover the design of treatment processes.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental information about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard may be obtained by referring to the Bibliography.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the design principles and performance requirements for secondary treatment by biological fixed-film reactors at wastewater treatment plants for more than 50 PT.
The primary application is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater.
Biological fixed film reactors include biological trickling filters, rotating biological contactors, submerged bed reactors and biofilters.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental informations about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard may be obtained by referring to the Bibliography.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European Standard gives design principles and specifies construction requirements for sludge treatment and storage facilities in wastewater treatment plants for more than 50 PT. Other sludges or organic wastes may be treated together with the municipal sewage sludge.Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental informations about the systems; this standard has not attempted to specify all available systems. Detailed information additional to that contained in this standard may be obtained by referring to the bibliography.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the performance requirements for the installation of lagooning processes. This part applies to wastewater lagooning processes treating municipal wastewater from combined or separate sewerage systems and when used as a tertiary treatment. Note: Lagooning processes are especially suitable for treatment of wastewater where large variations in flow are experienced (e.g. resulting from stormwater).

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the design principles and performance requirements for secondary treatment by biological fixed-film reactors at wastewater treatment plants for more than 50 PT.
The primary application is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater.
Biological fixed film reactors include biological trickling filters, rotating biological contactors, submerged bed reactors and biofilters.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental informations about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard may be obtained by referring to the Bibliography.

  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for structures and equipment as they relate to wastewater treatment plants for a total population of more than 50 PT.
The primary application is designed for wastewater treatment plants for the treatment of domestic and municipal wastewater.
Requirements for structures which are not specific for wastewater treatment plants are not within the scope of this European Standard. Other ENs can apply.
Equipment which is not solely used in wastewater treatment plants is subject to the applicable product standards. However, specific requirements for such equipment when used in wastewater treatment plants are included in this part.
General principles of building construction, mechanical and electrical engineering are not subject of this standard.
This European Standard does not cover the design of treatment processes.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental information about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard may be obtained by referring to the Bibliography.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies design principles and performance requirements for sludge treatment and storage facilities at wastewater treatment plants serving more than 50 PT.
Guidance on operation is provided where it is necessary in order to facilitate the design of control and automation and design access to points of operation.
NOTE   Other sludges and organic wastes can be treated together with municipal sewage sludge where national and local regulations permit.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable to lagoons and specifies the performance requirements for the installation of lagooning processes.
This document applies to wastewater lagooning processes treating municipal wastewater from combined or separate sewage systems and when used as a tertiary treatment.
NOTE   Lagoon systems are especially suitable for the treatment of wastewater where large flow variations occur (e.g. arising from surface water connections in the collection system). They are also especially suitable where large load variations occur (e.g. arising from fluctuating seasonal or industrial flows).

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for control and automation systems on wastewater treatment plants for more than 50 PT. If necessary, the control system should also be designed to cover the con-trol of sewer systems in the receiving area of the wastewater treatment plant.
It describes the necessary information and data which are needed for the design and implementation of such systems as well as the performance requirements with respect to the hard- and software.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental information about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard may be obtained by referring to the bibliography.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European Standard specifies the requirements for preliminary treatment of wastewater at wastewater treatment plants for over 50 PT. The primary application is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater. Preliminary treatment may include one or more of the following options: - screening; - grit removal; - grease separation; - flow balancing and flow separation.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies design principles and performance requirements for odour control and associated ventilation for wastewater treatment plants.
The primary application is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater for over 50 PT.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental information about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard can be obtained by referring to the bibliography.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives the application, procedure and specifies the requirements for chemical treatment of wastewater for removal of phosphorous and suspended solids. Differences in wastewaste treatment throughout Europe have led to a variety of practices being developed. This Standard gives fundamental informations about the practices; this Standard has not attempted to specify all available practices.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies performance requirements for the disinfection of effluents from wastewater treatment plants.
The primary application is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater for over 50 PT.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental information about the systems, this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard can be obtained by referring to the bibliography.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the performance requirements for treatment of wastewater using the activated sludge process for plants over 50 PT.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental information about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard may be obtained by referring to the bibliography.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the performance requirements for the primary settlement of wastewater at wastewater treatment plants for over 50 PT.
The primary application is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater.
Differences in wastewater treatment throughout Europe have led to a variety of systems being developed. This standard gives fundamental information about the systems; this standard has not attempted to specify all available systems.
Detailed information additional to that contained in this standard may be obtained by referring to the bibliography.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European Standard specifies data which is are necessary for the planning, design, bidding, guarantees, construction, start-up and compliance testing of a wastewater treatment plant or parts of it.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies design principles and performance requirements for tertiary clarification (receiving effluent from secondary treatment) by physical filtration plant at wastewater treatment works serving more than 50 PT.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day