ISO/TC 17/SC 9 - Tinplate and blackplate

This document specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils. Single cold-reduced ECCS is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,150 mm up to and including 0,600 mm. Double cold-reduced ECCS is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and including 0,390 mm. This document applies to coils and sheets cut from coils in nominal minimum rolling widths of 600 mm.1) 1) Nominal minimum rolling widths of 500 mm may be applied by agreement between the purchaser and the manufacturer.

This document specifies requirements for single and double cold-reduced low-carbon mild steel electrolytic tinplate in the form of sheets or coils. Single cold-reduced tinplate is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,150 mm up to and including 0,600 mm. Double cold-reduced tinplate is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and including 0,390 mm. This document applies to coils and sheets cut from coils in nominal minimum rolling widths of 600 mm.1) 1)Nominal minimum rolling widths of 500 mm can be applied by agreement between the purchaser and the manufacturer.

This document specifies requirements for single and double cold-reduced blackplate in the form of coils which are generally intended for manufacturing electrolytic tinplate or electrolytic chromium/chromium oxide-coated steel (ECCS) according to ISO 11949[1] or ISO 11950[2]. This document applies to: — single cold-reduced blackplate which is generally specified in nominal thicknesses that are multiples of 0,005 mm from 0,150 mm up to and including 0,600 mm; — double cold-reduced blackplate which is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and including 0,390 mm. This document applies to coils in nominal minimum rolling widths of 600 mm1) with either trimmed or untrimmed edges. 1)Nominal minimum rolling widths of 500 mm may be applied by agreement between the purchaser and the manufacturer.

ISO 11950:2016 specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils. Single cold-reduced ECCS is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,150 mm up to and including 0,600 mm. Double cold-reduced ECCS is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and including 0,360 mm. ISO 11950:2016 applies to coils and sheets cut from coils in nominal minimum rolling widths of 600 mm[1]. [1] Nominal minimum rolling widths of 500 mm may be applied by agreement between the purchaser and the manufacturer.

ISO 11951:2016 specifies requirements for single and double cold-reduced blackplate in the form of coils which are intended for manufacturing electrolytic tinplate or electrolytic chromium/chromium oxide-coated steel (ECCS) in accordance with ISO 11949 or ISO 11950. Single cold-reduced blackplate is generally specified in nominal thicknesses that are multiples of 0,005 mm from 0,150 mm up to and including 0,600 mm. Double cold-reduced blackplate is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and including 0,360 mm. ISO 11951:2016 applies to coils in nominal minimum rolling widths of 600 mm[1] with either trimmed or untrimmed edges. [1] Nominal minimum rolling widths of 500 mm may be applied by agreement between the purchaser and the manufacturer.

ISO 11949:2016 specifies requirements for single and double cold-reduced low-carbon mild steel electrolytic tinplate in the form of sheets or coils. Single cold-reduced tinplate is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,150 mm up to and including 0,600 mm. Double cold-reduced tinplate is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and including 0,360 mm. ISO 11949:2016 applies to coils and sheets cut from coils in nominal minimum rolling widths of 600 mm.[1] [1] Nominal minimum rolling widths of 500 mm may be applied by agreement between the purchaser and the manufacturer.

Specifies requirements for single and double cold-reduced blackplate in the form of coils in nominal minimum widths of 500 mm which are intended for manufacturing tinplate or electrolytic chromium/chromium oxide-coated steel in accordance with ISO 11949 or ISO 11950.

Specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils in nominal minimum widths of 500 mm.

Specifies requirements for single and double cold-reduced low-carbon mild steel for manufacture of electrolytic tinplate in form of sheets or coils.