13.030.10 - Solid wastes
Solid wastes
Feste Abfallstoffe
Déchets solides
Trdni odpadki
General Information
This European Standard specifies a method for quantitative determination of seven selected polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180) in soil, sludge, sediment, treated biowaste and waste and using GC-MS and GC-ECD.
The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract.
Under the conditions specified in this European Standard, lower limit ...view more
- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft46 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Specification provides methods, which can be used to assess the monolithic character of a stabilised/solidified waste, with respect to landfilling. Information on the monolithic character is required to enable the choice of appropriate leaching tests for determination of the release of different substances from stabilised/solidified waste under specified (landfilling) conditions.
This document includes several physical and/or chemical test methods each addressing different aspect...view more
- Technical specification12 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Specification provides methods, which can be used to assess the monolithic character of a stabilised/solidified waste, with respect to landfilling. Information on the monolithic character is required to enable the choice of appropriate leaching tests for determination of the release of different substances from stabilised/solidified waste under specified (landfilling) conditions.
This document includes several physical and/or chemical test methods each addressing different aspect...view more
- Technical specification12 pagesEnglish language
sale 10% off- e-Library read for1 day
This Standard is applicable to determine the leaching behaviour of inorganic constituents from granular waste (without or with size reduction. The waste body is subjected to percolation with water as a function of liquid to solid ratio under specified percolation conditions. The waste is leached under hydraulically dynamic conditions. The method is a once-through column leaching test and the test results establish the distinction between different release patterns, for instance wash-out and rele...view more
- Standard41 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in solid waste disposals, and the appropriate test methods to determine these characteristics.
The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation, reinforcement and protection. The separation function will always occur in conjunction with filtration or reinforcement, and hence will not be s...view more
- Standard46 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 63000:2016 specifies the technical documentation that the manufacturer compiles in order to declare compliance with the applicable substance restrictions
- Standard21 pagesEnglish and French language
sale 15% off
This European Standard is applicable for determining the leaching behaviour of monolithic wastes under dynamic conditions. The test is performed under fixed experimental conditions in this document. This test is aimed at determining the release as a function of time of inorganic constituents from a monolithic waste, when it is put into contact with an aqueous solution (leachant).
This dynamic monolithic leaching test (DMLT) is a parameter specific test as specified in EN 12920 and is therefore ...view more
- Standard62 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard is applicable for determining the leaching behaviour of monolithic wastes under dynamic conditions. The test is performed under fixed experimental conditions in this document. This test is aimed at determining the release as a function of time of inorganic constituents from a monolithic waste, when it is put into contact with an aqueous solution (leachant).
This dynamic monolithic leaching test (DMLT) is a parameter specific test as specified in EN 12920 and is therefore ...view more
- Standard62 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies a method for the determination of selected polybrominated flame retardants (BFR), chemically known as polybrominated diphenylethers (BDE), in waste materials using gas chromatography/mass spectrometry (GC-MS) in the electron impact (EI) ionisation mode (GC-EI-MS). When applying GC-EI-MS, the method is applicable to samples containing 100 μg/kg to 5 000 μg/kg of tetra- to octabromodiphenylether congeners and 100 μg/kg to 10 000 μg/kg of decabromo diphenylether (se...view more
- Standard28 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies a method for the determination of selected polybrominated flame retardants (BFR), chemically known as polybrominated diphenylethers (BDE), in waste materials using gas chromatography/mass spectrometry (GC-MS) in the electron impact (EI) ionisation mode (GC-EI-MS).
When applying GC-EI-MS, the method is applicable to samples containing 100 µg/kg to 5 000 µg/kg of tetra- to octabromodiphenylether congeners and 100 µg/kg to 10 000 µg/kg of decabromo diphenylether (s...view more
- Standard28 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Report gives additional and specific information on sampling for testing of waste from the extractive industry to support the development of appropriate sampling plans. This supplementary guidance to EN 14899 is required because waste from the extractive industry differs considerably from the waste types and sampling scenarios covered in the existing technical reports (CEN/TR 15310-1 to -5) that support the Framework Standard. This guidance document should be used in conjunction w...view more
- Technical report55 pagesEnglish language
sale 10% off- e-Library read for1 day
This European standard specifies methods to determine the potential of sulfide bearing materials for the formation of acidic drainage. Specified are methods for determining both the acid potential (AP) and the neutralisation potential (NP) of the material. From these results the net neutralisation potential (NNP) and the neutralisation potential ratio (NPR) are calculated. This European standard is applicable to all sulfide bearing wastes from the extractive industries excluding wastes which wil...view more
- Corrigendum2 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Specification specifies a compliance test for routine testing providing information on the leaching of monolithic waste which can be obtained under the experimental conditions specified hereafter with a single batch leaching test at a specified liquid to surface area ratio (L/A) of 12 (cm3*cm-2). It applies to test portion of monolithic waste of regular shape, with a minimum dimension of 40 mm in all directions, obtained e.g. by cutting, coring or moulding. This document is not ap...view more
- Technical specification21 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Report gives additional and specific information on sampling for testing of waste from the extractive industry to support the development of appropriate sampling plans. This supplementary guidance to EN 14899 is required because waste from the extractive industry differs considerably from the waste types and sampling scenarios covered in the existing technical reports (CEN/TR 15310-1 to -5) that support the Framework Standard. This guidance document should be used in conjunction w...view more
- Technical report55 pagesEnglish language
sale 10% off- e-Library read for1 day
CEN/TC 292 - Editorial modification into Table 1.
- Corrigendum2 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a compliance test for routine testing providing information on the leaching of monolithic waste which can be obtained under the experimental conditions specified hereafter with a single batch leaching test at a specified liquid to surface area ratio (L/A) of 12 (cm3cm-2). It applies to test portion of monolithic waste of regular shape, with a minimum dimension of 40 mm in all directions, obtained e.g. by cutting, coring or moulding.
This document is not applicable if th...view more
- Technical specification21 pagesEnglish language
sale 10% off- e-Library read for1 day
This European standard specifies methods to determine the potential of sulfide bearing materials for the formation of acidic drainage. Specified are methods for determining both the acid potential (AP) and the neutralisation potential (NP) of the material. From these results the net neutralisation potential (NNP) and the neutralisation potential ratio (NPR) are calculated. This European standard is applicable to all sulfide bearing wastes from the extractive industries excluding wastes which wil...view more
- Standard25 pagesEnglish language
sale 10% off- e-Library read for1 day
This European standard specifies methods to determine the potential of sulfide bearing materials for the formation of acidic drainage. Specified are methods for determining both the acid potential (AP) and the neutralisation potential (NP) of the material. From these results the net neutralisation potential (NNP) and the neutralisation potential ratio (NPR) are calculated.
This European standard is applicable to all sulfide bearing wastes from the extractive industries excluding wastes which w...view more
- Standard25 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Report gives guidance on the strategy for on-site verification and quality control of waste at landfills. It describes methods of visual inspection, control of documents and choice of necessity of testing by either screening methods or reference methods. It gives guidance on sampling, sample preparation and extraction for analysis.
The same procedures may be useful for on-site verification and quality control of waste at treatment plants.
- Technical report10 pagesEnglish language
sale 10% off- e-Library read for1 day
This Technical Report gives guidance on the strategy for on-site verification and quality control of waste at landfills. It describes methods of visual inspection, control of documents and choice of necessity of testing by either screening methods or reference methods. It gives guidance on sampling, sample preparation and extraction for analysis.
The same procedures may be useful for on-site verification and quality control of waste at treatment plants.
- Technical report10 pagesEnglish language
sale 10% off- e-Library read for1 day