This part of ISO/IEC 80079 specifies particular requirements and information for establishing and maintaining a quality system to manufacture Ex equipment productsincluding protective systems in accordance with the Ex certificate. While it does not preclude the use of other quality systems that are compatible with the objectives of ISO 9001:2008 2015 and which provide equivalent results, the minimum requirements shall be in accordance with this standard.

    • sale 10% off
    • Standard
      89 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      61 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for the identification and assessment of hazardous situations leading to explosion and the design and construction measures appropriate for the required safety. This is achieved by: - risk assessment; - risk reduction. The safety of equipment, protective systems and components can be achieved by eliminating hazards and/or limiting the risk, i.e. by: a) appropriate design (without using safeguarding); b) safeguarding; c) information for use; d) any other preventive...view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      47 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for the identification and assessment of hazardous situations leading to explosion and the design and construction measures appropriate for the required safety. This is achieved by:
-   risk assessment;
-   risk reduction.
The safety of equipment, protective systems and components can be achieved by eliminating hazards and/or limiting the risk, i.e. by:
a)   appropriate design (without using safeguarding);
b)   safeguarding;
c)   information for use;
d)   any other pre...
view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      47 pages
      English language
    • e-Library read for
      1 day

This European Technical Report applies to bucket elevators that may handle combustible products capable of producing potentially explosive atmospheres of dust or powder inside the bucket elevator during its operation. The precautions to control ignition sources will also be relevant where the product in the bucket elevator creates a fire risk but not an explosion risk.
For the purposes of this report, a bucket elevator is defined as an item of bulk material handling equipment that carries mater...
view more

    • sale 10% off
    • Technical report
      63 pages
      English language
    • e-Library read for
      1 day

This European Technical Report applies to bucket elevators that may handle combustible products capable of producing potentially explosive atmospheres of dust or powder inside the bucket elevator during its operation. The precautions to control ignition sources will also be relevant where the product in the bucket elevator creates a fire risk but not an explosion risk.
For the purposes of this report, a bucket elevator is defined as an item of bulk material handling equipment that carries mater...
view more

    • sale 10% off
    • Technical report
      63 pages
      English language
    • e-Library read for
      1 day

IEC/TS 60079-32-1:2013(E) gives guidance about the equipment, product and process properties necessary to avoid ignition and electrostatic shock hazards arising from static electricity as well as the operational requirements needed to ensure safe use of the equipment, product or process. It can be used in a risk assessment of electrostatic hazards or for the preparation of product family or dedicated product standards for electrical or non-electrical machines or equipment. The purpose of this do...view more

    • sale 10% off
    • Technical report
      182 pages
      English language
    • e-Library read for
      1 day

This document provides protocol guidelines for determining explosivity and flammability characteristics of powders containing manufactured nano-objects. These explosivity and flammability characteristics are needed for safety data sheets for safe storage, handling and transport of any powder.
In particular, this document will provide protocol guidelines concerning:
-   the determination of flammability characteristics of powders containing nano-objects with regard to sensitivity to ignition sour...
view more

    • sale 10% off
    • Technical specification
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum requirements and tests for electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen using software and/or digital technologies.
This European Standard is applicable to fixed, transportable and portable apparatus intended for use in domestic premises as well as commercial and industrial applications.
This European Standard does not apply to external sampling systems, or to apparatus of laboratory or scientific ty...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This standard specifies requirements for explosion pressure resistant and explosion pressure shock-resistant equipment. This standard is applicable to process vessels and systems. It is not applicable to individual items of equipment such as motors and gearboxes that may be designed to withstand an internal explosion, which are subject of EN 13463-3. This standard is valid for atmospheres having pressures ranging from 800 hPa to 1100 hPa and temperatures ranging from -20 °C to +60 °C. This stand...view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for explosion resistant equipment which will be able to withstand an internal explosion without rupturing and will not give rise to dangerous effects to the surroundings. It is applicable to equipment (vessels and systems) where explosions are considered to be an exceptional load case.
There are two types of explosion resistant equipment: explosion pressure resistant and explosion pressure shock-resistant equipment (see Figure 1).
(...)
Explosion ...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

2017-07-03 - Endorsement of ISO corrigendum including corrigendum content for the EN ISO version! TAN & SV collaboration

    • sale 10% off
    • Corrigendum
      15 pages
      English and French language
    • e-Library read for
      1 day

ISO/IEC 80079-20-1: 2017 is published as a dual log standard and provides guidance on classification of gases and vapours. It describes a test method intended for the measurement of the maximum experimental safe gaps (MESG) for gas-air mixtures or vapour-air mixtures under normal conditions of temperature and pressure (20 °C, 101,3 kPa) so as to permit the selection of an appropriate group of equipment. This document also describes a test method intended for use in the determination of the auto-...view more

    • sale 15% off
    • Standard
      176 pages
      English and French language

2017-07-03 - Endorsement of ISO corrigendum including corrigendum content for the EN ISO version! TAN & SV collaboration

    • sale 10% off
    • Corrigendum
      15 pages
      English and French language
    • e-Library read for
      1 day

This European Standard is applicable to apparatus and systems for the detection and measurement of flammable or toxic gases or vapours or oxygen.
This European Standard is a product standard which is based on EN 61508 (all parts) and for gas detection systems covers both low and high demand mode at SIL capabilities of 1, 2 or 3 only. Gas detection apparatus and gas detection systems are developed as generic products. This standard covers part of the phase 10 “realisation” of the overall safety...
view more

    • sale 10% off
    • Standard
      98 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies two test methods (method T and method B) to determine the explosion limits of gases, vapours and their mixtures, mixed with air. An air/inert gas mixture (volume fraction of the oxygen < 21 %) can be used as the oxidizer instead of air. In this European Standard, the term "air" includes such air/inert mixtures. This European Standard applies to gases, vapours and their mixtures at atmospheric pressure for temperatures up to 200 °C.
This European Standard specifi...
view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies two test methods (method T and method B) to determine the explosion limits of gases, vapours and their mixtures, mixed with air. An air/inert gas mixture (volume fraction of the oxygen < 21 %) can be used as the oxidizer instead of air. In this European Standard, the term "air" includes such air/inert mixtures. This European Standard applies to gases, vapours and their mixtures at atmospheric pressure for temperatures up to 200 °C.
This European Standard specifi...
view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This European Technical report applies to bucket elevators that may handle combustible products capable of
producing potentially explosive atmospheres of dust or powder inside the bucket elevator during its operation.
The precautions to control ignition sources will also be relevant where the product in the bucket elevator
creates a fire risk but not an explosion risk.
For the purposes of this report, a bucket elevator is defined as an item of bulk material handling equipment
that carries materi...
view more

    • sale 10% off
    • Technical report
      63 pages
      English language
    • e-Library read for
      1 day

2018-04-12 - standard can be offered for EMC - D159/C07
TC- corrections needed to tables

    • sale 10% off
    • Corrigendum
      1 page
      English language
    • e-Library read for
      1 day

This International Standard specifies the basic method and requirements for design, construction, testing and marking of non-electrical equipment intended for use in explosive atmospheres in air of gas, vapour, mist and dusts. Such atmospheres can also exist inside the equipment. In addition, the external atmosphere can be drawn inside the equipment by natural breathing produced as a result of fluctuations in the equipment’s internal operating pressure, and/or temperature.

    • sale 10% off
    • Standard
      93 pages
      English language
    • e-Library read for
      1 day