SIST EN ISO 32100:2019
(Main)Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018)
Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018)
This document specifies a test method for determining the flex resistance of rubber- or plastics‑coated
fabrics in the folded condition. The test method is applicable only to products which can be clamped in
the test apparatus used and to products with which the fold made in the test specimen can be caused to
move back and forth along the specimen during the test.
The appearance of the test specimen, after completion of either the flex number (see 3.1) or a specified
number of flex cycles, is taken as a measure of the flex resistance in the folded condition.
Mit Kautschuk oder Kunststoff beschichtete Textilien - Physikalische und mechanische Prüfungen - Bestimmung der Dauerbiegefestigkeit nach dem Flexometer-Verfahren (ISO 32100:2018)
Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Dauerbiegefestigkeit von mit Kautschuk oder Kunst¬stoff beschichteten Textilien in gefaltetem Zustand fest. Das Verfahren ist nur für solche Erzeugnisse geeignet, die ohne Zwang in das Prüfgerät eingespannt werden können und für Erzeugnisse, bei denen die Falte des Probekörpers während des Versuchs auf- und abläuft.
Das Aussehen der Probekörper nach Beendigung entweder der Faltzahl (siehe 3.1) oder der vereinbarten Anzahl von Faltbeanspruchungen gilt als Maß für die Dauerbiegefestigkeit in gefaltetem Zustand.
Supports textiles revêtus de caoutchouc ou de plastique - Essais physiques et mécaniques - Détermination de la résistance à la flexion à l'aide d'un flexomètre (ISO 32100:2018)
Le présent document spécifie une méthode d'essai permettant de déterminer la résistance à la flexion des supports textiles revêtus de caoutchouc ou de plastique, à l'état plié. La méthode d'essai s'applique uniquement aux produits qui peuvent être fixés dans l'appareillage d'essai utilisé et aux produits avec lesquels le pli formé sur l'éprouvette peut être entraîné dans un déplacement d'avant en arrière le long de l'éprouvette pendant l'essai.
L'aspect de l'éprouvette, après avoir effectué soit le nombre de flexions (voir 3.1) soit un nombre spécifié de cycles de flexion, est considéré comme la mesure de la résistance à la flexion, à l'état plié.
Gumirane ali plastificirane tekstilije - Fizikalno in mehansko preskušanje - Ugotavljanje odpornosti proti upogibanju na fleksimetru (ISO 32100:2018)
Ta dokument določa preskusno metodo za ugotavljanje odpornosti proti upogibanju upognjenih gumiranih ali plastificiranih tekstilij. Preskusna metoda se uporablja samo za izdelke, ki jih je mogoče vpeti v uporabljeno preskusno napravo, in za izdelke, pri katerih se lahko pregib na preskušancu med preskusom premika naprej in nazaj.
Videz preskušanca se po zaključku števila upogibov (glej 3.1) ali določenega števila upogibnih ciklov upošteva kot merilo odpornosti proti upogibanju v upognjenem stanju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 32100:2019
01-februar-2019
1DGRPHãþD
SIST EN ISO 32100:2012
Gumirane ali plastificirane tekstilije - Fizikalno in mehansko preskušanje -
Ugotavljanje odpornosti proti upogibanju na fleksimetru (ISO 32100:2018)
Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex
resistance by the flexometer method (ISO 32100:2018)
Mit Kautschuk oder Kunststoff beschichtete Textilien - Physikalische und mechanische
Prüfungen - Bestimmung der Dauerbiegefestigkeit nach dem Flexometer-Verfahren (ISO
32100:2018)
Supports textiles revêtus de caoutchouc ou de plastique - Essais physiques et
mécaniques - Détermination de la résistance à la flexion à l'aide d'un flexomètre (ISO
32100:2018)
Ta slovenski standard je istoveten z: EN ISO 32100:2018
ICS:
19.060 Mehansko preskušanje Mechanical testing
59.080.40 3RYUãLQVNRSUHYOHþHQH Coated fabrics
WHNVWLOLMH
SIST EN ISO 32100:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 32100:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 32100:2019
EN ISO 32100
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2018
EUROPÄISCHE NORM
ICS 59.080.40 Supersedes EN ISO 32100:2010
English Version
Rubber- or plastics-coated fabrics - Physical and
mechanical tests - Determination of flex resistance by the
flexometer method (ISO 32100:2018)
Supports textiles revêtus de caoutchouc ou de Mit Kautschuk oder Kunststoff beschichtete Textilien -
plastique - Essais physiques et mécaniques - Physikalische und mechanische Prüfungen -
Détermination de la résistance à la flexion à l'aide d'un Bestimmung der Dauerbiegefestigkeit nach dem
flexomètre (ISO 32100:2018) Flexometer-Verfahren (ISO 32100:2018)
This European Standard was approved by CEN on 13 September 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 32100:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 32100:2019
EN ISO 32100:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 32100:2019
EN ISO 32100:2018 (E)
European foreword
This document (EN ISO 32100:2018) has been prepared by Technical Committee ISO/TC 45 "Rubber
and rubber products" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile
products” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2019, and conflicting national standards shall be
withdrawn at the latest by May 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 32100:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 32100:2018 has been approved by CEN as EN ISO 32100:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 32100:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 32100:2019
INTERNATIONAL ISO
STANDARD 32100
Second edition
2018-10
Rubber- or plastics-coated fabrics —
Physical and mechanical tests —
Determination of flex resistance by
the flexometer method
Supports textiles revêtus de caoutchouc ou de plastique — Essais
physiques et mécaniques — Détermination de la résistance à la
flexion à l'aide d'un flexomètre
Reference number
ISO 32100:2018(E)
©
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 32100:2019
ISO 32100:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 32100:2019
ISO 32100:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Test specimens. 3
6.1 Sampling . 3
6.2 Number of test specimens . 4
6.3 Conditioning of the test specimens . 4
7 Procedure. 4
8 Expression of results . 6
9 Test report . 7
Annex A (informative) Important clarifications . 8
Bibliography . 9
© ISO 2018 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 32100:2019
ISO 32100:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products,
Subcommittee SC 4, Products other than hoses.
This second edition cancels and replaces the first edition (ISO 32100:2010), which has been technically
revised:
The main changes compared to the previous edition are as follows:
— the list of apparatus has been updated;
— the procedure has been amended;
— in 7.12, an additional procedure has been added;
— the Bibliography has been updated.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2018 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 32100:2019
INTERNATIONAL STANDARD ISO 32100:2018(E)
Rubber- or plastics-coated fabrics — Physical and
mechanical tests — Determination of flex resistance by the
flexometer method
1 Scope
This document specifies a test method for determining the flex resistance of rubber- or plastics-coated
fabrics in the folded condition. The test method is applicable only to products which can be clamped in
the test apparatus used and to products with which the fold made in the test specimen can be caused t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.