EN ISO 6179:2017

Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)

ISO 6179:2017 specifies two methods for determining, by measurement of the transmission rate, the permeability of rubber to volatile liquids diffusing into open air.
It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm and 3,0 mm.
It is restricted to transmission rates of more than 0,1 g/m2·h.
The methods are particularly useful for comparing the relative transmission rates of one liquid through different materials, or of several liquids through one material.
Method A, with refilling, is used when testing mixtures of liquids which give different transmission rates.
Method B, with no refilling, is used for a single-component liquid.
NOTE       A method for the determination of water vapour transmission rate is given in ISO 2528.

Elastomere oder thermoplastische Elastomere - Elastomerfolien und elastomer-beschichtete Gewebe - Bestimmung der Durchlässigkeitsrate von flüchtigen Flüssigkeiten (gravimetrisches Verfahren) (ISO 6179:2017)

Caoutchouc vulcanisé ou thermoplastique - Feuilles de caoutchouc et supports textiles revêtus de caoutchouc - Détermination du taux de transmission des liquides volatils (technique gravimétrique) (ISO 6179:2017)

ISO 6179:2017 spécifie deux méthodes pour la détermination de la perméabilité du caoutchouc aux liquides volatils, à l'air libre, par mesurage du taux de transmission.
ISO 6179:2017 n'est applicable qu'aux matériaux en feuille et aux supports textiles revêtus ayant une épaisseur comprise entre 0,2 mm et 3,0 mm.
ISO 6179:2017 est limité aux taux de transmission supérieurs à 0,1 g/m2·h.
Les méthodes décrites sont particulièrement utiles pour comparer le taux relatif de transmission d'un liquide à travers différents matériaux ou de plusieurs liquides à travers un seul matériau.
La méthode A, avec remplissages répétés, est utilisée pour des essais sur des mélanges de liquides ayant des taux de transmission différents.
La méthode B, sans remplissages répétés, est utilisée pour un seul composant liquide.
NOTE       Une méthode de détermination du coefficient de transmission de la vapeur d'eau est donnée dans l'ISO 2528.

Gumirano, vulkanizirano ali termoplastično - Gumirane površine in gumirane tekstilije - Ugotavljanje prepuščanja hitro hlapljivih tekočin (gravimetrijska tehnika) (ISO 6179:2017)

Ta dokument določa dve metodi za določevanje (z merjenjem hitrosti prehoda) prepuščanja gumiranih površin za hitro hlapljive tekočine, ki se razpršijo v zrak.
Uporablja se samo za materiale v obliki plošč in prevlečene tkanine z debelino 0,2–3,0 mm.
Standard je omejen na hitrosti prehoda, ki so večje od 0,1 g/m2 h.
Metodi sta še posebej uporabni za primerjavo relativnih hitrosti prehoda ene tekočine skozi različne materiale ali več tekočin skozi en material.
Metoda A (s ponovnim polnjenjem) se uporablja pri preskušanju mešanic tekočin, ki imajo različne hitrosti prehoda.
Metoda B (brez ponovnega polnjenja) se uporablja za enokomponentne tekočine.
OPOMBA: Metoda za določanje stopnje prenosa vodne pare je podana v standardu ISO 2528.

General Information

• Status: Published
• Publication Date: 29-Aug-2017
• Withdrawal Date: 27-Feb-2018
• ICS: 59.080.40 - Coated fabrics
• ICS: 83.140.10 - Films and sheets
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248/WG 4 - Coated fabrics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 30-Aug-2017
• Completion Date: 30-Aug-2017
• Ref Project: SIST EN ISO 6179:2017 - Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)

Relations

• Replaces: EN ISO 6179:2010 - Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2010)
• Effective Date: 16-Dec-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6179:2017
01-november-2017
1DGRPHãþD
SIST EN ISO 6179:2013
*XPLUDQRYXONDQL]LUDQRDOLWHUPRSODVWLþQR*XPLUDQHSRYUãLQHLQJXPLUDQH
WHNVWLOLMH8JRWDYOMDQMHSUHSXãþDQMDKLWURKODSOMLYLKWHNRþLQJUDYLPHWULMVNDWHKQLND
,62
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics -
Determination of transmission rate of volatile liquids (gravimetric technique) (ISO
6179:2017)
Elastomere oder thermoplastische Elastomere - Elastomerfolien und elastomer-
beschichtete Gewebe - Bestimmung der Durchlässigkeitsrate von flüchtigen
Flüssigkeiten (gravimetrisches Verfahren) (ISO 6179:2017)
Caoutchouc vulcanisé ou thermoplastique - Feuilles de caoutchouc et supports textiles
revêtus de caoutchouc -- Détermination du taux de transmission des liquides volatils
(technique gravimétrique) (ISO 6179:2017)
Ta slovenski standard je istoveten z: EN ISO 6179:2017
ICS:
59.080.40 3RYUãLQVNRSUHYOHþHQH Coated fabrics
WHNVWLOLMH
83.140.10 Filmi in folije Films and sheets
SIST EN ISO 6179:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6179:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 6179:2017


EN ISO 6179
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2017
EUROPÄISCHE NORM
ICS 59.080.40; 83.140.10 Supersedes EN ISO 6179:2010
English Version

Rubber, vulcanized or thermoplastic - Rubber sheets and
rubber-coated fabrics - Determination of transmission rate
of volatile liquids (gravimetric technique) (ISO 6179:2017)
Caoutchouc vulcanisé ou thermoplastique - Feuilles de Elastomere oder thermoplastische Elastomere -
caoutchouc et supports textiles revêtus de caoutchouc - Elastomerfolien und elastomer-beschichtete Gewebe -
Détermination du taux de transmission des liquides Bestimmung der Durchlässigkeitsrate von flüchtigen
volatils (technique gravimétrique) (ISO 6179:2017) Flüssigkeiten (gravimetrisches Verfahren) (ISO
6179:2017)
This European Standard was approved by CEN on 22 August 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6179:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6179:2017
EN ISO 6179:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6179:2017
EN ISO 6179:2017 (E)
European foreword
This document (EN ISO 6179:2017) has been prepared by Technical Committee ISO/TC 45 “Rubber and
rubber products” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile
products” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6179:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo
...