71.040.10 - Chemical laboratories. Laboratory equipment

EN-IEC 61010-2-010 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever the heating of materials is one of the functions of the equipment. Addition: Add the following text after item c): It is possible that all or part of the equipment falls within the scope of one or more other Part 2 standards of IEC 61010 as well as within the scope of this standard. In that case, the requiremen...view more

EN-IEC 61010-2-081 applies to automatic and semi-automatic laboratory equipment for analysis and other purposes. Automatic and semi-automatic laboratory equipment consists of instruments or systems for measuring or modifying one or more characteristics or parameters of samples, performing the complete process or parts of the process without manual intervention. Equipment forming part of such a system is within the scope of this document. Examples of equipment within the scope of this document in...view more

IEC 61010-2-040:2020 is available as IEC 61010-2-040:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61010-2-040:2020 specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4. Examples of such equip...view more

This document applies for the planning, design, installation and commissioning of ventilation systems in laboratories. It also applies for scientific classrooms in schools when equipped with a ventilation system.
The application of this document depends not on the term laboratory in its narrower sense but this document also applies also for laboratory-related rooms in which work with dangerous or health hazardous substances is performed.

This document applies for the planning, design, installation and commissioning of ventilation systems in laboratories. It also applies for scientific classrooms in schools when equipped with a ventilation system.
The application of this document depends not on the term laboratory in its narrower sense but this document also applies also for laboratory-related rooms in which work with dangerous or health hazardous substances is performed.

This European Standard specifies safety requirements and test methods for workbenches for laboratories
including laboratory tables and gives recommendations for their dimensions.
This European Standard applies to workbenches, movable tables and workbench shelves designed for use in
research, educational, quality control and similar laboratories.
This European Standard does not apply to workbenches for pupils in scientific class rooms of schools. It does
not apply to workbenches for special ...view more

This document applies to workbenches, movable science tables and workbench shelves designed for use in educational institutions and similar laboratories. It does not apply to workbenches and working tables for industrial laboratories, institutes and universities or similar research institutions. It does not apply to fume cupboards
This document specifies safety and durability requirements and test methods and gives dimensions.
Requirements and test methods related to the fire safety or workbe...view more

This document is a product specification, giving performance requirements for water overhead emergency safety body showers installed on industrial and logistic sites, (in combination with safety eyewashes and hand-held showers as well),
a)   which are permanently connected to a water supply or
b)   which are equipped with a store tank and optionally connected to an uninterrupted or a temporary water supply.
Emergency safety body showers using fluid other than water are not considered in this stan...view more

This document is a product specification, giving performance requirements for water overhead emergency safety body showers installed on industrial and logistic sites, (in combination with safety eyewashes and hand-held showers as well),
a)   which are permanently connected to a water supply; or
b)   which are equipped with a store tank and optionally connected to an uninterrupted or a temporary water supply.
Emergency safety body showers using fluid other than water are not considered in this doc...view more

This document is a product specification, giving performance requirements for plumbed-in multiple nozzle emergency safety body showers which are permanently connected to a water supply and installed on industrial and logistic sites.
Emergency safety body showers using fluid other than water are not considered in this standard.
This standard also specifies requirements in respect of installation, adjustment and marking of the showers as well as operation and maintenance instructions to be given...view more

This document is a product specification, giving performance requirements for plumbed-in multiple nozzle emergency safety body showers which are permanently connected to a water supply and installed on industrial and logistic sites.
Emergency safety body showers using fluid other than water are not considered in this document.
This document also specifies requirements in respect of installation, adjustment and marking of the showers as well as operation and maintenance instructions to be given...view more

IEC 61010-2-033:2019 is available as IEC 61010-2-033:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61010-2-033:2019 specifies safety requirements for hand-held multimeters for domestic and professional use, capable of measuring mains. Hand-held multimeters are multi-range multifunction measuring instruments intended to measure voltage and other electrical quantities such as resistance...view more

IEC 61010-1:2010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used.
a) Electrical test and measurement equipment
b) Electrical industrial process-control equipment
c) Electrical laboratory equipment
This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant changes from the second edition, as we...view more

This part of IEC 60746 is intended:
• to specify terminology, definitions and requirements for statements by manufacturers for
analyzers, sensor units and electronic units used for the determination of dissolved
oxygen partial pressure or concentration;
• to establish performance tests for such analyzers, sensor units and electronic units;
• to provide basic documents to support the applications of quality assurance standards
[1]1.
This document applies to analyzers using membrane covered...view more

2019-01-21 JF  Under publication. To be published by 2019-03-08.
2018-12-20 JF: the Common modification (PR=68281) received positive assessment. This project is to be published as amendment with Common modification.
2018-10-11 JF the project TO BE PUT ON HOLD until the Common Modification (PR=68281) are finalised
2018-10-09 JF: assessment of the second formal vote draft is missing
2017-09-20 - D158/C013 - BT drop + vote & request 2nd vote

This document specifies type test methods for the assessment of safety and performance of fume
cupboards connected to an exhaust air system. Relevant requirements are specified in EN 14175-2.
For terms and their definitions, EN 14175-1 applies. For safety and performance requirements of fume
cupboards, EN 14175-2 applies. For on-site test methods of fume cupboards, EN 14175-4 applies. For
the type testing and on-site testing of variable air volume (VAV) fume cupboards, EN 14175-6 applies in
...view more

This document specifies type test methods for the assessment of safety and performance of fume cupboards connected to an exhaust air system. Relevant requirements are specified in EN 14175-2.
For terms and their definitions, EN 14175-1 applies. For safety and performance requirements of fume cupboards, EN 14175-2 applies. For on-site test methods of fume cupboards, EN 14175-4 applies. For the type testing and on-site testing of variable air volume (VAV) fume cupboards, EN 14175-6 applies in add...view more

IEC 61010-1:2010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a) Electrical test and measurement equipment b) Electrical industrial process-control equipment c) Electrical laboratory equipment This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant changes from the second edition, as well ...view more

IEC TS 62271-304:2019 applies to indoor enclosed switchgear and controlgear complying with IEC 62271-200 and IEC 62271-201, intended to be used in special service conditions with respect to condensation and pollution deviating from the normal service conditions specified in IEC 62271-1.
The test detailed in this document has been designed primarily to classify the electrical insulation performance of equipment having high-voltage electrical insulation exposed to indoor service conditions, m...view more

2019-01-21 JF  Under publication. To be published by 2019-03-08.
2018-12-20 JF: the Common modification (PR=68281) received positive assessment. This project is to be published as amendment with Common modification.
2018-10-11 JF the project TO BE PUT ON HOLD until the Common Modification (PR=68281) are finalised
2018-10-09 JF: assessment of the second formal vote draft is missing
2017-09-20 - D158/C013 - BT drop + vote & request 2nd vote