Workbenches for laboratories in educational institutions - Dimensions, safety and durability requirements and test methods

This document applies to workbenches, movable science tables and workbench shelves designed for use in educational institutions and similar laboratories. It does not apply to workbenches and working tables for industrial laboratories, institutes and universities or similar research institutions. It does not apply to fume cupboards
This document specifies safety and durability requirements and test methods and gives dimensions.
Requirements and test methods related to the fire safety or workbenches and to the resistance of the work surface are not included in this document.
Requirements concerning electrical safety and media services (eg water, gas, wastewater, compressed air) are not included in this document.

Arbeitstische für Laboratorien in Bildungseinrichtungen - Maße, Anforderungen an die Sicherheit und Dauerhaltbarkeit und Prüfverfahren

Dieses Dokument gilt für fest installierte Arbeitstische, bewegliche Labortische und Tischablagen, die für den Gebrauch in Bildungseinrichtungen und gleichartigen Laboratorien konstruiert sind. Es gilt nicht für Arbeitstische und Labortische in industriellen Laboratorien, Instituten und Hochschulen oder ähnlichen Forschungseinrichtungen. Es gilt nicht für Abzüge.
Dieses Dokument legt Sicherheitsanforderungen und Prüfverfahren sowie Anforderungen an die Dauer-haltbarkeit fest und enthält Angaben für Maße.
Anforderungen und Prüfverfahren hinsichtlich der Feuersicherheit von Arbeitstischen und hinsichtlich der Widerstandsfähigkeit der Arbeitsoberfläche werden in diesem Dokument nicht behandelt.
Anforderungen an die elektrische Sicherheit und die Medienversorgung (z. B. Wasser, Gas, Abwasser, Druckluft) sind ebenfalls nicht Gegenstand dieses Dokuments.

Paillasses de laboratoire dans les établissements d’enseignement - Dimensions, spécification de sécurité et de durabilité et méthodes d’essai

Le présent document s’applique aux paillasses, aux tables de science mobiles et aux tablettes conçues pour une utilisation dans des établissements d’enseignement général et autres laboratoires similaires.
Le présent document spécifie les exigences de sécurité et de durabilité ainsi que les méthodes d’essai, et il indique les dimensions.
Les exigences et les méthodes d’essai relatives à la sécurité incendie des paillasses et à la résistance du plan de travail ne sont pas incluses dans le présent document.
Les exigences concernant la sécurité électrique ne sont pas non plus incluses.

Delovni pulti za laboratorije v vzgojno-izobraževalnih ustanovah - Mere, zahteve za varnost in trajnost ter preskusne metode

General Information

Status
Published
Publication Date
25-Feb-2020
Withdrawal Date
30-Aug-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Feb-2020
Due Date
22-Jun-2020
Completion Date
26-Feb-2020

Relations

Buy Standard

Standard
EN 13150:2020
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13150:2018
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13150:2020
01-april-2020
Nadomešča:
SIST EN 13150:2002
Delovni pulti za laboratorije v vzgojno-izobraževalnih ustanovah - Mere, zahteve za
varnost in trajnost ter preskusne metode
Workbenches for laboratories in educational institutions - Dimensions, safety and
durability requirements and test methods
Arbeitstische für Laboratorien in Bildungseinrichtungen - Maße, Anforderungen an die
Sicherheit und Dauerhaltbarkeit und Prüfverfahren
Paillasses de laboratoire dans les établissements d’enseignement - Dimensions,
spécification de sécurité et de durabilité et méthodes d’essai
Ta slovenski standard je istoveten z: EN 13150:2020
ICS:
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
97.140 Pohištvo Furniture
SIST EN 13150:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13150:2020

---------------------- Page: 2 ----------------------
SIST EN 13150:2020


EN 13150
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 71.040.10 Supersedes EN 13150:2001
English Version

Workbenches for laboratories in educational institutions -
Dimensions, safety and durability requirements and test
methods
Paillasses de laboratoire dans les établissements Arbeitstische für Laboratorien in
d'enseignement - Dimensions, spécification de sécurité Bildungseinrichtungen - Maße, Anforderungen an die
et de durabilité et méthodes d'essai Sicherheit und Dauerhaltbarkeit und Prüfverfahren
This European Standard was approved by CEN on 27 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13150:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13150:2020
EN 13150:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General test conditions . 5
4.1 Preliminary preparation . 5
4.2 Tolerances . 5
4.3 Test installation . 5
5 Dimensions . 5
5.1 General . 5
5.2 Heights .
...

SLOVENSKI STANDARD
oSIST prEN 13150:2018
01-maj-2018
Delovni pulti za laboratorije - Mere, varnostne zahteve in preskusne metode
Workbenches for laboratories - Dimensions, safety requirements and test methods
Arbeitstische für Laboratorien - Maße, Sicherheitsanforderungen und Prüfverfahren
Paillasses de laboratoire - Dimensions, spécification de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 13150
ICS:
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
97.140 Pohištvo Furniture
oSIST prEN 13150:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13150:2018

---------------------- Page: 2 ----------------------
oSIST prEN 13150:2018


DRAFT
EUROPEAN STANDARD
prEN 13150
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2018
ICS 71.040.10 Will supersede EN 13150:2001
English Version

Workbenches for laboratories - Dimensions, safety
requirements and test methods
Paillasses de laboratoire - Dimensions, spécification de Arbeitstische für Laboratorien - Maße,
sécurité et méthodes d'essai Sicherheitsanforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 207.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13150:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13150:2018
prEN 13150:2018 (E)
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General test conditions . 4
5 Dimensions . 5
6 Safety requirements. 9
7 Strength and durability requirements . 9
8 Product information . 10
9 Marking and labelling requirements . 11
10 Test report . 11
Anne
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.