Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control

2019-03-19: to contact PM before proceeding with any assessment request.

Automatische elektrische Regel- und Steuergeräte - Teil 2-9: Besondere Anforderungen an temperaturabhängige Regel- und Steuergeräte

Dispositifs de commande électrique automatiques - Partie 2-9: Exigences particulières pour les dispositifs de commande thermosensibles

Avtomatske električne krmilne naprave - 2-9. del: Posebne zahteve za temperaturne regulatorje - Dopolnilo A2

General Information

Status
Published
Publication Date
03-Sep-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Aug-2020
Due Date
15-Oct-2020
Completion Date
04-Sep-2020

Relations

Buy Standard

Amendment
EN IEC 60730-2-9:2019/A2:2020
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
EN 60730-2-9:2019/A2:2020
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60730-2-9:2019/A2:2020
01-oktober-2020
Avtomatske električne krmilne naprave - 2-9. del: Posebne zahteve za
temperaturne regulatorje - Dopolnilo A2
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing
control
Ta slovenski standard je istoveten z: EN IEC 60730-2-9:2019/A2:2020
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN IEC 60730-2-9:2019/A2:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60730-2-9:2019/A2:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 60730-2-9:2019/A2:2020


EUROPEAN STANDARD EN IEC 60730-2-9:2019/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2020
ICS 97.120

English Version
Automatic electrical controls - Part 2-9: Particular requirements
for temperature sensing controls
(IEC 60730-2-9:2015/A2:2020)
Dispositifs de commande électrique automatiques - Partie Automatische elektrische Regel- und Steuergeräte - Teil 2-
2-9: Exigences particulières pour les dispositifs de 9: Besondere Anforderungen an temperaturabhängige
commande thermosensibles Regel- und Steuergeräte
(IEC 60730-2-9:2015/A2:2020) (IEC 60730-2-9:2015/A2:2020)
This amendment A2 modifies the European Standard EN IEC 60730-2-9:2019; it was approved by CENELEC on 2020-05-14. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60730-2-9:2019/A2:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60730-2-9:2019/A2:2020
EN IEC 60730-2-9:2019/A2:2020 (E)
European foreword
The text of document 72/1225/FDIS, future IEC 60730-2-9/A2, prepared by IEC/TC 72 "Automatic
electrical controls" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60730-2-9:2019/A2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-14
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-14
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 60730-2-9:2015/A2:2020 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 60730-2-9:2019/A2:2020



IEC 60730-2-9

®


Edition 4.0 2020-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




A MENDMENT 2

AM ENDEMENT 2





Automatic electrical controls –

Part 2-9: Particular requirements for temperature sensing controls




Dispositifs de commande électrique automatiques –

Partie 2-9: Exigences particulières pour les dispositifs de commande

thermosensibles














INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 97.120 ISBN 978-2-8322-8066-9




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------
SIST EN IEC 60730-2-9:2019/A2:2020
– 2 – IEC 60730-2-9:2015/AMD2:2020
© IEC 2020
FOREWORD
This amendment has been prepared by IEC technical committee 72: Automatic electrical
controls.
The text of this amendment is based on the following documents:
FDIS Report on voting
72/1225/FDIS 72/1236/RVD

Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or

...

SLOVENSKI STANDARD
SIST EN 60730-2-9:2019/A2:2020
01-oktober-2020
Avtomatske električne krmilne naprave - 2-9. del: Posebne zahteve za
temperaturne regulatorje - Dopolnilo A2
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing
control
Ta slovenski standard je istoveten z: EN IEC 60730-2-9:2019/A2:2020
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN 60730-2-9:2019/A2:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60730-2-9:2019/A2:2020

---------------------- Page: 2 ----------------------
SIST EN 60730-2-9:2019/A2:2020


EUROPEAN STANDARD EN IEC 60730-2-9:2019/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2020
ICS 97.120

English Version
Automatic electrical controls - Part 2-9: Particular requirements
for temperature sensing controls
(IEC 60730-2-9:2015/A2:2020)
Dispositifs de commande électrique automatiques - Partie Automatische elektrische Regel- und Steuergeräte - Teil 2-
2-9: Exigences particulières pour les dispositifs de 9: Besondere Anforderungen an temperaturabhängige
commande thermosensibles Regel- und Steuergeräte
(IEC 60730-2-9:2015/A2:2020) (IEC 60730-2-9:2015/A2:2020)
This amendment A2 modifies the European Standard EN IEC 60730-2-9:2019; it was approved by CENELEC on 2020-05-14. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60730-2-9:2019/A2:2020 E

---------------------- Page: 3 ----------------------
SIST EN 60730-2-9:2019/A2:2020
EN IEC 60730-2-9:2019/A2:2020 (E)
European foreword
The text of document 72/1225/FDIS, future IEC 60730-2-9/A2, prepared by IEC/TC 72 "Automatic
electrical controls" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60730-2-9:2019/A2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-14
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-14
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 60730-2-9:2015/A2:2020 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN 60730-2-9:2019/A2:2020



IEC 60730-2-9

®


Edition 4.0 2020-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




A MENDMENT 2

AM ENDEMENT 2





Automatic electrical controls –

Part 2-9: Particular requirements for temperature sensing controls




Dispositifs de commande électrique automatiques –

Partie 2-9: Exigences particulières pour les dispositifs de commande

thermosensibles














INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 97.120 ISBN 978-2-8322-8066-9




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------
SIST EN 60730-2-9:2019/A2:2020
– 2 – IEC 60730-2-9:2015/AMD2:2020
© IEC 2020
FOREWORD
This amendment has been prepared by IEC technical committee 72: Automatic electrical
controls.
The text of this amendment is based on the following documents:
FDIS Report on voting
72/1225/FDIS 72/1236/RVD

Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.