ASTM A6/A6M-13a
(Specification)Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ABSTRACT
This specification deals with the general requirements that apply to rolled structural steel bars, plates, shapes, and sheet piling. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace followed by additional refining in a ladle metallurgy furnace, or secondary melting by vacuum-arc remelting or electrostag remelting. The steel products shall undergo heat treatment, structural conditioning, and strand casting in stationary molds. Tension testing and chemical analysis shall be performed wherein the specimens shall conform to the required mechanical properties such as tensile strength, yield strength and elongation, and the required metallurgical structure and composition specifications of the products. Final products shall be legibly marked, bundled, and tagged with the applicable designation, grade, heat number, size and thickness, and name, brand, or trademark of the manufacturer for identification and shipment.
SCOPE
1.1 This general requirements specification2 covers a group of common requirements that, unless otherwise specified in the applicable product specification, apply to rolled structural steel bars, plates, shapes, and sheet piling covered by each of the following product specifications issued by ASTM:
ASTM
Designation3
Title of Specification
A36/A36M
Carbon Structural Steel
A131/A131M
Structural Steel for Ships
A242/A242M
High-Strength Low-Alloy Structural Steel
A283/A283M
Low and Intermediate Tensile Strength Carbon Steel Plates
A328/A328M
Steel Sheet Piling
A514/A514M
High-Yield Strength, Quenched and Tempered Alloy Steel Plate Suitable for Welding
A529/A529M
High-Strength Carbon-Manganese Steel of Structural Quality
A572/A572M
High-Strength Low-Alloy Columbium-Vanadium Steel
A573/A573M
Structural Carbon Steel Plates of Improved Toughness
A588/A588M
High-Strength Low-Alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point to 4 in. [100 mm] Thick
A633/A633M
Normalized High-Strength Low-Alloy Structural Steel Plates
A656/A656M
Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A690/A690M
High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
A709/A709M
Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
A710/A710M
Age-Hardening Low-Carbon Nickel-Copper-Chromium-Mo-
lybdenum-Columbium Alloy Structural Steel Plates
A769/A769M
Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes
A786/A786M
Rolled Steel Floor Plates
A827/A827M
Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M
Plates, Alloy Steel, Structural Quality
A830/A830M
Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A857/A857M
Steel Sheet Piling, Cold Formed, Light Gage
A871/A871M
High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A913/A913M
High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A871/A871M
High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A945/A945M
High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A950/A950M
Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A992/A992M
Steel for Structural Shapes for Use in Building Framing
A1043/A1043M
Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1066/A1066M
High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
1.2 Annex A1 lists permitted variations in dimensions and mass (Note 1) in SI u...
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:A6/A6M −13a
StandardSpecification for
General Requirements for Rolled Structural Steel Bars,
1
Plates, Shapes, and Sheet Piling
This standard is issued under the fixed designation A6/A6M; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
A913/A913M High-Strength Low-Alloy Steel Shapes of Structural Quality,
Produced by Quenching and Self-Tempering Process
2
1.1 This general requirements specification covers a group
(QST)
of common requirements that, unless otherwise specified in the A871/A871M High-Strength Low-Alloy Structural Steel Plate With Atmo-
spheric Corrosion Resistance
applicable product specification, apply to rolled structural steel
A945/A945M High-Strength Low-Alloy Structural Steel Plate with Low
bars, plates, shapes, and sheet piling covered by each of the
Carbon and Restricted Sulfur for Improved Weldability,
following product specifications issued by ASTM: Formability, and Toughness
A950/A950M Fusion Bonded Epoxy-Coated Structural Steel H-Piles and
ASTM
Sheet Piling
Title of Specification
3
Designation
A992/A992M Steel for Structural Shapes for Use in Building Framing
A36/A36M Carbon Structural Steel
A1043/A1043M Structural Steel with Low Yield to Tensile Ratio for Use in
A131/A131M Structural Steel for Ships
Buildings
A242/A242M High-Strength Low-Alloy Structural Steel
A1066/A1066M High-Strength Low-Alloy Structural Steel Plate Produced by
A283/A283M Low and Intermediate Tensile Strength Carbon Steel Plates
Thermo-Mechanical Controlled Process (TMCP)
A328/A328M Steel Sheet Piling
1.2 Annex A1 lists permitted variations in dimensions and
A514/A514M High-Yield Strength, Quenched and Tempered Alloy Steel
Plate Suitable for Welding
mass (Note 1) in SI units. The values listed are not exact
A529/A529M High-Strength Carbon-Manganese Steel of Structural Qual-
conversions of the values in Tables 1 to 31 inclusive but are,
ity
A572/A572M High-Strength Low-Alloy Columbium-Vanadium Steel instead,roundedorrationalizedvalues.ConformancetoAnnex
A573/A573M Structural Carbon Steel Plates of Improved Toughness
A1 is mandatory when the “M” specification designation is
A588/A588M High-Strength Low-Alloy Structural Steel with 50 ksi (345
used.
MPa) Minimum Yield Point to 4 in. [100 mm] Thick
A633/A633M Normalized High-Strength Low-Alloy Structural Steel Plates
NOTE 1—The term “weight” is used when inch-pound units are the
A656/A656M Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate
standard; however, under SI, the preferred term is “mass.”
with Improved Formability
A690/A690M High-Strength Low-Alloy Steel H-Piles and Sheet Piling for
1.3 Annex A2 lists the dimensions of some shape profiles.
Use in Marine Environments
A709/A709M Carbon and High-Strength Low-Alloy Structural Steel
1.4 Appendix X1 provides information on coil as a source
Shapes, Plates, and Bars and Quenched-and-Tempered
of structural products.
Alloy Structural Steel Plates for Bridges
A710/A710M Age-Hardening Low-Carbon Nickel-Copper-Chromium-Mo-
1.5 Appendix X2 provides information on the variability of
lybdenum-Columbium Alloy Structural Steel Plates
A769/A769M Carbon and High-Strength Electric Resistance Welded Steel tensile properties in plates and structural shapes.
Structural Shapes
1.6 Appendix X3 provides information on weldability.
A786/A786M Rolled Steel Floor Plates
A827/A827M Plates, Carbon Steel, for Forging and Similar Applications
1.7 Appendix X4 provides information on cold bending of
A829/A829M Plates, Alloy Steel, Structural Quality
A830/A830M Plates, Carbon Steel, Structural Quality, Furnished to plates, including suggested minimum inside radii for cold
Chemical Composition Requirements
bending.
A857/A857M Steel Sheet Piling, Cold Formed, Light Gage
A871/A871M High-Strength Low-Alloy Structural Steel Plate With Atmo-
1.8 This general requirements specification also covers a
spheric Corrosion Resistance
group of supplementary requirements that are applicable to
severaloftheaboveproductspecificationsasindicatedtherein.
Such requirements are provided for use where additional
1
This specification is under the jurisdiction ofASTM Committee A01 on Steel,
testing or additional restrictions are required by the purchaser,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
and apply only where specified individually in the purchase
A01.02 on Structural Steel for Bridges, Buildings, Rolling Stock and Ships.
order.
Current edition approved Oct. 1, 2013. Published October 2013. Originally
approved in
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: A6/A6M − 13 A6/A6M − 13a
Standard Specification for
General Requirements for Rolled Structural Steel Bars,
1
Plates, Shapes, and Sheet Piling
This standard is issued under the fixed designation A6/A6M; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
2
1.1 This general requirements specification covers a group of common requirements that, unless otherwise specified in the
applicable product specification, apply to rolled structural steel bars, plates, shapes, and sheet piling covered by each of the
following product specifications issued by ASTM:
ASTM
Title of Specification
3
Designation
A36/A36M Carbon Structural Steel
A131/A131M Structural Steel for Ships
A242/A242M High-Strength Low-Alloy Structural Steel
A283/A283M Low and Intermediate Tensile Strength Carbon Steel Plates
A328/A328M Steel Sheet Piling
A514/A514M High-Yield Strength, Quenched and Tempered Alloy Steel
Plate Suitable for Welding
A529/A529M High-Strength Carbon-Manganese Steel of Structural Qual-
ity
A572/A572M High-Strength Low-Alloy Columbium-Vanadium Steel
A573/A573M Structural Carbon Steel Plates of Improved Toughness
A588/A588M High-Strength Low-Alloy Structural Steel with 50 ksi (345
MPa) Minimum Yield Point to 4 in. [100 mm] Thick
A633/A633M Normalized High-Strength Low-Alloy Structural Steel Plates
A656/A656M Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate
with Improved Formability
A690/A690M High-Strength Low-Alloy Steel H-Piles and Sheet Piling for
Use in Marine Environments
A709/A709M Carbon and High-Strength Low-Alloy Structural Steel
Shapes, Plates, and Bars and Quenched-and-Tempered
Alloy Structural Steel Plates for Bridges
A710/A710M Age-Hardening Low-Carbon Nickel-Copper-Chromium-Mo-
lybdenum-Columbium Alloy Structural Steel Plates
A769/A769M Carbon and High-Strength Electric Resistance Welded Steel
Structural Shapes
A786/A786M Rolled Steel Floor Plates
A827/A827M Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M Plates, Alloy Steel, Structural Quality
A830/A830M Plates, Carbon Steel, Structural Quality, Furnished to
Chemical Composition Requirements
A857/A857M Steel Sheet Piling, Cold Formed, Light Gage
A871/A871M High-Strength Low-Alloy Structural Steel Plate With Atmo-
spheric Corrosion Resistance
A913/A913M High-Strength Low-Alloy Steel Shapes of Structural Quality,
Produced by Quenching and Self-Tempering Process
(QST)
A871/A871M High-Strength Low-Alloy Structural Steel Plate With Atmo-
spheric Corrosion Resistance
A945/A945M High-Strength Low-Alloy Structural Steel Plate with Low
Carbon and Restricted Sulfur for Improved Weldability,
Formability, and Toughness
1
This specification is under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.02
on Structural Steel for Bridges, Buildings, Rolling Stock and Ships.
Current edition approved May 1, 2013Oct. 1, 2013. Published June 2013October 2013. Originally approved in 1949. Last previous edition approved in 20122013 as
A6/A6M – 12a.A6/A6M – 13. DOI: 10.1520/A0006_A0006M-13. 10.1520/A0006_A0006M-13A.
2
For ASME Boiler and Pressure Vessel Code applications, see related Specification SA-6/SA-6M in Section II of that Code.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
A6/A6M − 13a
A950/A950M Fusion Bonded Epoxy-Coated Structural Steel H-Piles and
Sheet Piling
A992/A992M Steel for Structural Shapes for Use in Building Framing
A1043/A1043M Structural Steel with Low Yield to Tensile Ratio for Use in
Buildings
A1066/A1066M High-Strength Low-Alloy Structural Steel Plate Produced by
Thermo-Mechanical Controlled Process (TMCP)
1.2 Annex A1 lists permitted variations in dimensions and mass (Note 1) in SI units. The values listed are not exact conversions
of the values in Tables 1 to 31 inclusive but are, instead, rounded or rationalized values. Conformance to Annex A1 is mandatory
when the “M” specification designation is used.
NOTE 1—The term “weight” is used when inch-pound units are the standard; ho
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.