ASTM D7345-16
(Test Method)Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
SIGNIFICANCE AND USE
5.1 The distillation (volatility) characteristics of hydrocarbons and other liquids have an important effect on their safety and performance, especially in the case of fuels and solvents. The boiling range gives information on the composition, the properties, and the behavior of the fuel during storage and use. Volatility is the major determinant of the tendency of a hydrocarbon mixture to produce potentially explosive vapors.
5.2 The distillation characteristics are critically important for both automotive and aviation gasolines, affecting starting, warm-up, and tendency to vapor lock at high operating temperature or at high altitude, or both. The presence of high boiling point components in these and other fuels can significantly affect the degree of formation of solid combustion deposits.
5.3 Distillation limits are often included in petroleum product specifications, in commercial contract agreements, process refinery/control applications, and for compliance to regulatory rules.
5.4 This test method can be applied to contaminated products or hydrocarbon mixtures. This is valuable for fast product quality screening, refining process monitoring, fuel adulteration control, or other purposes including use as a portable apparatus for field testing.
5.5 This test method uses an automatic micro distillation apparatus, provides fast results using small sample volume, and eliminates much of the operator time and subjectivity in comparison to Test Method D86.
SCOPE
1.1 This test method covers a procedure for determination of the distillation characteristics of petroleum products and liquid fuels having boiling range between 20 °C to 400 °C at atmospheric pressure using an automatic micro distillation apparatus.
1.2 This test method is applicable to such products as; light and middle distillates, automotive spark-ignition engine fuels, automotive spark-ignition engine fuels containing up to 20 % ethanol, aviation gasolines, aviation turbine fuels, regular and low sulfur diesel fuels, biodiesel (B100), biodiesel blends up to 20 % biodiesel, special petroleum spirits, naphthas, white spirits, kerosines, burner fuels, and marine fuels.
1.3 The test method is also applicable to hydrocarbons with a narrow boiling range, like organic solvents or oxygenated compounds.
1.4 The test method is designed for the analysis of distillate products; it is not applicable to products containing appreciable quantities of residual material.
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D7345 − 16
596/12
Standard Test Method for
Distillation of Petroleum Products and Liquid Fuels at
1
Atmospheric Pressure (Micro Distillation Method)
This standard is issued under the fixed designation D7345; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* specified, such as in contractual agreements or regulatory rules
where earlier versions of the method(s) identified may be
1.1 This test method covers a procedure for determination
required.
of the distillation characteristics of petroleum products and
2
liquid fuels having boiling range between 20 °C to 400 °C at
2.2 ASTM Standards:
atmospheric pressure using an automatic micro distillation
D86 Test Method for Distillation of Petroleum Products and
apparatus.
Liquid Fuels at Atmospheric Pressure
D323 TestMethodforVaporPressureofPetroleumProducts
1.2 This test method is applicable to such products as; light
and middle distillates, automotive spark-ignition engine fuels, (Reid Method)
D1160 Test Method for Distillation of Petroleum Products at
automotive spark-ignition engine fuels containing up to 20 %
ethanol, aviation gasolines, aviation turbine fuels, regular and Reduced Pressure
lowsulfurdieselfuels,biodiesel(B100),biodieselblendsupto D4057 Practice for Manual Sampling of Petroleum and
20 % biodiesel, special petroleum spirits, naphthas, white Petroleum Products
spirits, kerosines, burner fuels, and marine fuels. D4177 Practice for Automatic Sampling of Petroleum and
Petroleum Products
1.3 The test method is also applicable to hydrocarbons with
D4953 Test Method for Vapor Pressure of Gasoline and
a narrow boiling range, like organic solvents or oxygenated
Gasoline-Oxygenate Blends (Dry Method)
compounds.
D5190 Test Method for Vapor Pressure of Petroleum Prod-
1.4 The test method is designed for the analysis of distillate 3
ucts (Automatic Method) (Withdrawn 2012)
products;itisnotapplicabletoproductscontainingappreciable
D5191 Test Method for Vapor Pressure of Petroleum Prod-
quantities of residual material.
ucts (Mini Method)
1.5 The values stated in SI units are to be regarded as
D5482 Test Method for Vapor Pressure of Petroleum Prod-
standard. No other units of measurement are included in this
ucts (Mini Method—Atmospheric)
standard.
D5854 Practice for Mixing and Handling of Liquid Samples
of Petroleum and Petroleum Products
1.6 This standard does not purport to address all of the
D6299 Practice for Applying Statistical Quality Assurance
safety concerns, if any, associated with its use. It is the
and Control Charting Techniques to Evaluate Analytical
responsibility of the user of this standard to establish appro-
Measurement System Performance
priate safety and health practices and determine the applica-
D6300 Practice for Determination of Precision and Bias
bility of regulatory limitations prior to use.
Data for Use in Test Methods for Petroleum Products and
2. Referenced Documents Lubricants
D6708 Practice for StatisticalAssessment and Improvement
2.1 All standards are subject to revision, and parties to
of Expected Agreement Between Two Test Methods that
agreement on this test method are to apply the most recent
Purport to Measure the Same Property of a Material
edition of the standards indicated below, unless otherwise
1 2
This test method is under the jurisdiction of ASTM Committee D02 on For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Subcommittee D02.08 on Volatility. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved April 1, 2016. Published June 2016. Originally the ASTM website.
3
approved in 2007. Last previous edition approved in 2014 as D7345 – 14. DOI: The last approved version of this historical standard is referenced on
10.1520/D7345-16. www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D7345 − 16
4
2.3 Energy Institute Standards: charge volume, associated with a simultaneous temperature
IP 69 Petroleum Products—Determination of Vapour readings. Percent recovered is reported for ASTM 8C ther-
Pressure—Reid Method mometer correlation.
IP 394 Liquid Petroleum Products—Vapour Pressure—Part
3.1.9 percentrecovery,n—percentrecoverypredictedbythe
1: Determination of Air Saturat
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D7345 − 14 D7345 − 16
596/12
Standard Test Method for
Distillation of Petroleum Products and Liquid Fuels at
1
Atmospheric Pressure (Micro Distillation Method)
This standard is issued under the fixed designation D7345; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This test method covers a procedure for determination of the distillation characteristics of petroleum products and liquid
fuels having boiling range between 20 °C to 400 °C at atmospheric pressure using an automatic micro distillation apparatus.
1.2 This test method is applicable to such products as; light and middle distillates, automotive spark-ignition engine fuels,
automotive spark-ignition engine fuels containing up to 10 %20 % ethanol, aviation gasolines, aviation turbine fuels, regular and
low sulfur diesel fuels, biodiesel (B100), biodiesel blends up to 20 % biodiesel, special petroleum spirits, naphthas, white spirits,
kerosines, burner fuels, and marine fuels.
1.3 The test method is also applicable to hydrocarbons with a narrow boiling range, like organic solvents or oxygenated
compounds.
1.4 The test method is designed for the analysis of distillate products; it is not applicable to products containing appreciable
quantities of residual material.
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2.1 All standards are subject to revision, and parties to agreement on this test method are to apply the most recent edition of
the standards indicated below, unless otherwise specified, such as in contractual agreements or regulatory rules where earlier
versions of the method(s) identified may be required.
2
2.2 ASTM Standards:
D86 Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
D323 Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D1160 Test Method for Distillation of Petroleum Products at Reduced Pressure
D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products
D4953 Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
3
D5190 Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (Withdrawn 2012)
D5191 Test Method for Vapor Pressure of Petroleum Products (Mini Method)
D5482 Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)
D5854 Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
1
This test method is under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of Subcommittee
D02.08 on Volatility.
Current edition approved Dec. 1, 2014April 1, 2016. Published January 2015June 2016. Originally approved in 2007. Last previous edition approved in 20082014 as
D7345 – 08.D7345 – 14. DOI: 10.1520/D7345-14.10.1520/D7345-16.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D7345 − 16
D6299 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measure-
ment System Performance
D6300 Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
D6708 Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport
to Measure the Same Property of a Material
4
2.3 Energy
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.