ASTM D4111-95(2001)
(Specification)Standard Performance Specification for Woven Napery and Tablecloth Fabrics Household and Institutional
Standard Performance Specification for Woven Napery and Tablecloth Fabrics Household and Institutional
SCOPE
1.1 This performance specification covers woven fabrics comprised of any textile fiber or mixture of fibers to be used in napery and tablecloths (household and institutional).
1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: D 4111 – 95 (Reapproved 2001)
Standard Performance Specification for
Woven Napery and Tablecloth Fabrics: Household and
1
Institutional
This standard is issued under the fixed designation D 4111; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 23 Colorfastness to Burnt Gas Fumes
61 Colorfastness to Washing, Domestic, and Laundering,
1.1 This performance specification covers woven fabrics
Commercial: Accelerated
comprised of any textile fiber or mixture of fibers to be used in
92 Chlorine, Retained, Tensile Loss: Single Sample Method
napery and tablecloths (household and institutional).
96 Dimensional Changes in Laundering of Woven and
1.2 These requirements apply to both the length and width
Knitted Textiles Except Wool
directions for those properties where fabric direction is perti-
116 Colorfastness to Crocking: Rotary Vertical Crockmeter
nent.
Method
1.3 This standard does not purport to address all of the
124 Appearance of Durable Press Fabrics After Repeated
safety concerns, if any, associated with its use. It is the
Home Launderings
responsibility of the user of this standard to establish appro-
130 Soil Release: Oily Stain Release Method
priate safety and health practices and determine the applica-
135 Dimensional Changes in Automatic Home Laundering
bility of regulatory limitations prior to use.
of Woven or Knit Fabrics
2. Referenced Documents
Evaluation Procedure No. 1 Gray Scale for Color Change
Evaluation Procedure No. 2 Gray Scale for Staining
2.1 ASTM Standards:
2
Evaluation Procedure No. 3 AATCC Chromatic Transfer-
D 123 Terminology Relating to Textiles
ence Scale
D 1336 Test Method for Distortion of Yarn in Woven
4
2
2.3 Federal Standard:
Fabrics
16 CFR, Chapter II–Consumer Product Safety Commission
D 1424 Test Method for Tear Resistance of Woven Fabrics
2
Subchapter D–Flammable Fabrics Act Regulations
by Falling-Pendulum (Elmendorf) Apparatus
5
2.4 Military Standard:
D 1682 Test Methods for Breaking Load and Elongation of
2
MIL-STD-105D Sampling Procedures and Tables for In-
Textile Fabrics
spection by Attributes
D 2261 Test Method for Tearing Strength of Woven Fabrics
by the Tongue (Single Rip) Method (Constant-Rate-of-
NOTE 1—Reference to test methods in this specification give only the
2
Extension Tensile Testing Machine)
permanent part of the designation of ASTM, AATCC, or other test
methods. The current editions of each test method cited shall prevail.
D 2262 Test Method for Tearing Strength of Woven Fabrics
by the Tongue (Single Rip) Method (Constant-Rate-of-
3. Terminology
2
Traverse Tensile Testing Machine)
3.1 Definitions:
D 2724 Test Methods for Bonded, Fused, and Laminated
2
3.1.1 For definitions of textile terms used in this specifica-
Apparel Fabrics
tion refer to the individual ASTM and AATCC methods and to
D 2905 Practice for Statements on Number of Specimens
2
Terminology D 123.
for Textiles
3
3.2 Definitions found in a dictionary of common terms are
2.2 AATCC Methods:
suitable for this specification.
8 Colorfastness to Crocking: AATCC Crockmeter Method
16 Colorfastness to Light
4. Specification Requirements
4.1 The properties of woven fabrics for napery and table-
1
This specification is under the jurisdiction of ASTM Committee D13 on
cloths for household and institutional uses shall conform to the
Textiles and is the direct responsibility of Subcommittee D13.63 on Home
Furnishings.
Current edition approved May 15, 1995. Published July 1995. Originally
4
published as D 4111 – 82. Last previous edition D 4111 – 92. Available from Superintendent of Documents, Government Printing Office,
2
Annual Book of ASTM Standards, Vol 07.01. Washington, DC 20402.
3 5
Available from American Association of Textile Chemists and Colorists, P.O. Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700
Box 12215, Research Triangle Park, NC 27709. Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
D 4111
specification requirements in Table 1. 6.2 Laboratory Sample—From each roll or piece in the lot
sample, cut two laboratory samples the full width of the fabric
5. Significance and Use
and at least 375 mm (15 in.) along the selvage.
5.1 Upon agreement between the purchaser and the seller,
7. Test Methods (see Note 1)
fabrics intended for this end use should meet all of the
7.1 Breaking Strength (Load)—Determine the dry-breaking
requirements listed in Table 1 of this specification.
strength (load) as direc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.