iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM E2360-04(2010)

(Specification)

Specification for Cryptolaemus montrouzieri Mulsant (Coleoptera: Coccinellidae) (Withdrawn 2019)

Specification for <i>Cryptolaemus montrouzieri</i> Mulsant (<i>Coleoptera: Coccinellidae</i>) (Withdrawn 2019)

ABSTRACT
This specification covers information on and the test method for determining the purity, sex ratio, and number of adults in shipments of the predatory beetle Cryptolaemus montrouzieri (Order Coleoptera; Family Coccinellidae). Because the efficacy of the biological control of mealybug by C. montrouzieri depends on accurate release numbers, presence of male and female species, and absence of live product contaminants, accurate packaging and maintenance of purity and viability of C. montrouzieri shipments is, therefore, essential for the effective management of the target pests. This specification is intended for use by producers and end-users of the specified biological control agent.
SIGNIFICANCE AND USE
The efficacy of mealybug control by C. montrouzieri depends on accurate release numbers of beetles, presence of male and female beetles, and absence of live product contaminants. Accurate packaging and maintenance of purity and viability of C. montrouzieri shipments is, therefore, essential for the effective management of the target pest. This test method is intended for use by producers and end-users of the specified biological control agent. It is complementary to the quality guidelines for Cryptolaemus montrouzieri .
SCOPE
1.1 This specification covers information on and the test method for determining purity, sex ratio, and number of adults in shipments of the predatory beetle Cryptolaemus montrouzieri.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
WITHDRAWN RATIONALE
This specification covers information on and the test method for determining purity, sex ratio, and number of adults in shipments of the predatory beetle Cryptolaemus montrouzieri.
Formerly under the jurisdiction of Committee E35 on Pesticides, Antimicrobials, and Alternative Control Agents, this specification was withdrawn in January 2019 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

General Information

Status
Withdrawn
Publication Date
30-Sep-2010
Withdrawal Date
10-Jan-2019
ICS
07.080 - Biology. Botany. Zoology
Technical Committee
E35 - Pesticides, Antimicrobials, and Alternative Control Agents
Current Stage
Ref Project

Relations

Replaces
ASTM E2360-04 - Specification for <i>Cryptolaemus montrouzieri</i> Mulsant (<i>Coleoptera: Coccinellidae</i>)
Effective Date
01-Oct-2010

Buy Standard

ASTM E2360-04(2010) - Specification for <i>Cryptolaemus montrouzieri</i> Mulsant (<i>Coleoptera: Coccinellidae</i>) (Withdrawn 2019)ASTM E2360-04(2010) - Specification for <i>Cryptolaemus montrouzieri</i> Mulsant (<i>Coleoptera: Coccinellidae</i>) (Withdrawn 2019)
PreviousNext
Technical specification
ASTM E2360-04(2010) - Specification for <i>Cryptolaemus montrouzieri</i> Mulsant (<i>Coleoptera: Coccinellidae</i>) (Withdrawn 2019)
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:E2360 −04 (Reapproved 2010)
Standard Specification for
Cryptolaemus montrouzieri Mulsant (Coleoptera:
Coccinellidae)
This standard is issued under the fixed designation E2360; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 4.5 Genus—Cryptolaemus.
1.1 This specification covers information on and the test 4.6 Species—montrouzieri.
method for determining purity, sex ratio, and number of adults
TEST METHOD—DETERMINING THE PURITY, SEX
in shipments of the predatory beetle Cryptolaemus montrouz-
RATIO, AND NUMBER OF ADULTS IN SHIPMENTS
ieri.
OF C. montrouzieri
1.2 The values stated in SI units are to be regarded as
standard. No other units of measurement are included in this
5. Summary of Test Method
standard.
5.1 This test method describes a method of counting the
number of C. montrouzieri beetles packaged in a carrier.
2. Referenced Documents
5.2 The number of C. montrouzieri will be determined by
2.1 ASTM Standards:
examiningaminimumofthreeunitsanddeterminingthemean
E2200Specification for Information Included with Packag-
value. In each container, live contaminants will be identified
ing of Multi-Cellular Biological Control Organisms
and recorded.
(Withdrawn 2010)
6. Significance and Use
3. Terminology
6.1 The efficacy of mealybug control by C. montrouzieri
3.1 Definitions of Terms Specific to This Standard:
depends on accurate release numbers of beetles, presence of
3.1.1 carrier—shredded paper.
male and female beetles, and absence of live product contami-
3.1.2 life stage when shipped—adult.
nants. Accurate packaging and maintenance of purity and
3.1.3 name of product—Cryptolaemus montrouzieri Mul-
viability of C. montrouzieri shipments is, therefore, essential
sant.
for the effective management of the target pest. This test
3.1.4 preferred host prey—mealybugs.
method is intended for use by producers and end-users of the
specified biological control agent. It is complementary to the
4. Classification
quality guidelines for Cryptolaemus montrouzieri .
4.1 Phylum—Arthropoda.
7. Materials
4.2 Class—Insecta.
7.1 Dissecting microscope or headband magnifier (7 to
4.3 Order—Coleoptera.
10×).
4.4 Family—Coccinellidae.
7.2 30 DR snap-top plastic vial.
7.3 Pharmaceutical pill counting tray.
This specification is under the jurisdiction of ASTM Committee E35 on
7.4 Fine-pointed No. 5/0 paint brush.
Pesticides, Antimicrobials, and Alternative Control Agentsand is the direct respon-
sibility of Subcommittee E35.30 on Natural Multi-Cellular (Metazoan) Biological
Control Organisms.
8. Test Unit
Current edition approved Oct. 1, 2010. Published November 2010. Originally
8.1 Asingle container with C. montrouzieri is considered a
approved in 2004. Last previous edition approved in 2004 as E2360–04. DOI:
10.1520/E2360-04R10.
test unit. A minimum of three containers per shipment will be
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
randomly selected from the shipping box.
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
3 4
The last approved version of this historical standard is referenced on Developed by the International Organization of Biological Control and pub-
www.astm.org. lished in Lenteren, J. C. van (ed.), 2003.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM E1705-23(Terminology)
Standard Terminology Relating to Bioenergy and Industrial Chemicals from Biomass

SCOPE
1.1 This document is composed of terms, definitions of terms, descriptions of terms, and acronyms used in ASTM documents related to the field of bioenergy and industrial chemicals from biomass. Terms that are adequately defined in a general dictionary are not defined in this terminology standard.  
1.2 This standard includes terminology used in areas related to bioenergy and industrial chemicals from biomass, such as, but not limited to: characterization and identification of biomass, aseptic sampling, preservation of biological samples, sustainability, denatured fuel ethanol, cooking fuels and biomass conversion.  
1.2.1 The bylaws for Committee E48 allow the definitions approved in current E48 standards to be added to this terminology standard editorially. The definitions will have an attribution to indicate the standard(s) containing the definition. Subcommittee E48.91 can also develop definitions for the terminology standard. Those definitions will be attributed to the subcommittee.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM E943-23(Terminology)
Standard Terminology Relating to Biological Effects and Environmental Fate

SCOPE
1.1 This terminology document defines terms commonly used in standards developed by ASTM Subcommittee E50.47 on Biological Effects and Environmental Fate. This terminology document is intended to be consistent with the use of terms in ASTM standards related to this field and, to the extent possible, with use by other organizations.  
1.1.1 If a specific Subcommittee E50.47 standard uses one of these terms in a different context, then the term should be defined in that standard. A term used only in a specific ASTM standard need not be included in this terminology document.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E1242-23(Practice)
Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis

SIGNIFICANCE AND USE
5.1 This procedure can be used to limit the need for screening tests prior to performing a test for estimating the LC50 of a non-reactive and non-electrolytic chemical to the fathead minnow. By eliminating the screening test, fewer fish need be tested. The time used for preparing and performing the screening test can also be saved. The value obtained in this procedure can be used as the preliminary estimate of the LC50 in a full-scale test.  
5.2 Estimates can be used to set testing priority of groups of non-reactive and non-electrolytic chemicals.  
5.3 If the estimated value is more than 0.3 times the experimental value, the mechanism of action is probably narcosis. If less, the effect concentration is considered to reflect a different mechanism of action.  
5.4 This practice estimates a maximum LC50, that is, non-reactive and non-electrolytic chemicals are at least as toxic as the practice predicts, but may have a lower LC50 if acting by a more specific mechanism. Data on a chemical indicating a lower toxicity than predicted should be considered suspect or an artifact because of limited solubility of the test material.
SCOPE
1.1 This practice covers a procedure for estimating the fathead minnow (Pimephales promelas) 96-h LC50 of nonreactive (that is, covalently bonded without unsaturated residues) and nonelectrolytic (that is, require vigorous reagents to facilitate substitution, addition, replacement reactions and are non-ionic, non-dissociating in aqueous solutions) organic chemicals acting solely by narcosis, also referred to as Meyer-Overton toxicity relationship.2  
1.2 This procedure is accurate for organic chemicals that are toxic due to narcosis and are non-reactive and non-electrolytic. Examples of appropriate chemicals are: alcohols, ketones, ethers, simple halogenated aliphatics, aromatics, and aliphatic substituted aromatics. It is not appropriate for chemicals whose structures include a potential toxiphore (that structural component of a chemical molecule that has been identified to show mammalian toxicity, for example CN is known to be reponsible for inactivation of enzymes, NO2 for decoupling of oxidative phosphorylation, both leading to mammalian toxicity). Examples of chemicals inappropriate for this practice are: carbamates, organophosphates, phenols, beta-gamma unsaturated alcohols, electrophiles, and quaternary ammonium salts.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM E729-23e1(Guide)
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians

SIGNIFICANCE AND USE
5.1 An acute toxicity test is conducted to obtain information concerning the immediate effects on test organisms of a short-term exposure to a test material under specific experimental conditions. An acute toxicity test does not provide information about whether delayed effects will occur, although a post-exposure observation period, with appropriate feeding, if necessary, might provide such information. Bioavailability of the test substance may also differ between real-world exposures and laboratory exposures due to site-specific water quality conditions (see Guides E1192, E1563, and E2455).  
5.2 Results of acute toxicity tests might be used to predict acute effects likely to occur on aquatic organisms in field situations as a result of exposure under comparable conditions, except that (1) motile organisms might avoid exposure when possible, and (2) toxicity to benthic organisms might be dependent on sorption or settling of the test material onto the substrate.  
5.3 Results of acute tests might be used to compare the acute sensitivities of different species and the acute toxicities of different test materials, and to study the effects of various environmental factors on results of such tests.  
5.4 Results of acute toxicity tests might be an important consideration when assessing the hazards of materials to aquatic organisms (see Guide E1023) or when deriving water quality criteria for aquatic organisms (3).  
5.5 Results of acute toxicity tests might be useful for studying the biological availability of, and structure-activity relationships between, test materials.  
5.6 Results of acute toxicity tests will depend on the temperature, composition of the dilution water, condition of the test organisms, exposure technique, and other factors.
SCOPE
1.1 This guide (1)2 describes procedures for obtaining laboratory data concerning the adverse effects (for example, lethality and immobility) of a test material added to dilution water, but not to food, on certain species of freshwater and saltwater fishes, macroinvertebrates, and amphibians, usually during 2 to 4-day exposures, depending on the species. These procedures will probably be useful for conducting acute toxicity tests with many other aquatic species, although modifications might be necessary.  
1.2 Other modifications of these procedures might be justified by special needs or circumstances such as meeting specific study goals, regulatory needs, or to accommodate specific test organism life stages. Although using appropriate procedures is more important than following prescribed procedures, results of tests conducted using unusual or novel procedures are not likely to be comparable to results of many other tests. Comparison of results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting acute tests.  
1.3 This guide describes tests using three basic exposure techniques: static, renewal, and flow-through. Selection of the technique to use in a specific situation will depend on the needs of the investigator and on available resources. Tests using the static technique provide the most easily obtained measure of acute toxicity, but conditions often change substantially during static tests; therefore, static tests should not last longer than 96 h, and test organisms should not be fed during such tests unless the test organisms are severely stressed without feeding over 48 h. Static tests should probably not be conducted on materials that have a high oxygen demand, are highly volatile, are rapidly transformed biologically or chemically in aqueous solution, or are removed from test solutions in substantial quantities by the test chambers or organisms during the test. Because the pH and concentrations of dissolved oxygen and test material are maintained at desired levels and degradation and metabolic products are removed, tests using ren...

  • Guide
    23 pages
    English language
    sale 15% off
ASTM
ASTM E3072-22a(Terminology)
Standard Terminology for Industrial Biotechnology and Synthetic Biology

SCOPE
1.1 This terminology is a repository for the terms, and their standardized definitions, as relates to the technical standards generated by Committee E62 on Industrial Biotechnology and Synthetic Biology. The meanings and explanations of the technical terms have been written for both the nonexpert and the expert user.  
1.2 At a minimum, this terminology is updated annually (at a time corresponding to the publication of the Annual Book of ASTM Standards containing this terminology standard) to include editorially any terms approved in the committee’s technical standards.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E3354-22(Guide)
Standard Guide for Application of Molecular Biological Tools to Assess Biological Processes at Contaminated Sites

SIGNIFICANCE AND USE
4.1 Contaminated sites subject to remediation are growing in complexity and associated remediation costs, presenting a challenge for managers of contaminated sites. The need to properly monitor, evaluate, and report remediation processes (including physical, chemical, and biological) characterizing site conditions and contaminant mass and attenuation is critical for the evaluation and selection of effective remediation strategies. Assessment and characterization of biological processes associated with contaminant attenuation is supported and improved by the accurate and consistent use of molecular biological tools (MBTs) including data acquisition, interpretation, and reporting.  
4.2 The development of this guide through ASTM International is designed to meet the needs of managers of contaminated sites within the United States and elsewhere. The variety of available MBTs and the complexity with which they are currently being applied are not addressed in existing ASTM International Standards. The principal users of this guide should be industry project managers, regulators, consultants, analytical laboratories, and community stakeholders.
SCOPE
1.1 This guide provides a framework for the application of molecular biological tools (MBTs) to assess and characterize in-situ biological processes to improve contaminated soil and groundwater management. While the focus of this guide is on in-situ biological processes, some concepts of how to apply MBTs can also be applied to ex-situ bioremediation approaches (for example, biopiles, bioreactors) to support design, operation, and troubleshooting. The intent of this guide is to develop a consistent way in which MBTs are applied at contaminated sites, not to develop expertise. Technical experts need to be engaged whenscoping, planning, executing, and interpreting data for MBTs. Lastly, there is a brief description of isotopic techniques within section 5.2; however, the scope and focus of this guide is the use of nucleic acid-based MBTs to assess biological processes at contaminated sites.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    24 pages
    English language
    sale 15% off
ASTM
ASTM F3570-22(Terminology)
Standard Terminology Relating to Microphysiological Systems

SCOPE
1.1 This terminology defines basic terms and presents the relationships of the scientific fields related to microphysiological systems (MPS). Committee F04 has defined these terms for the specific purpose of unifying the language used in standards for MPS.  
1.2 The terms and nomenclature presented in this standard are for the specific purpose of unifying the language used in MPS standards and are not intended for labeling of regulated medical products.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E1022-22(Guide)
Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks

SIGNIFICANCE AND USE
5.1 A bioconcentration test is conducted to obtain information concerning the ability of an aquatic species to accumulate a test material directly from water. This guide provides guidance for designing bioconcentration tests on the properties of the test material so that each material is tested in a cost-effective manner.  
5.2 Because steady-state is usually approached from the low side and the definition of apparent steady-state is based on a statistical hypothesis test, the apparent steady-state BCF will usually be lower than the steady-state BCF. With the variation and sample sizes commonly used in bioconcentration tests, the actual steady-state BCF will usually be no more than twice the apparent BCF.  
5.3 When both are determined in the same test, the projected steady-state BCF will usually be higher than the apparent steady-state BCF because the models used to calculate the projected BCF assume that the BCF steadily increases until infinite time.  
5.4 The BCFs and rates and extents of uptake and depuration will depend on temperature, water quality, the species and its size, physiological condition, age, and other factors (1).4 Although organisms are fed during tests, uptake by means of sorption onto food is probably negligible during tests.  
5.5 Results of bioconcentration tests are used to predict concentrations likely to occur in aquatic organisms in field situations as a result of exposure under comparable conditions, except that mobile organisms might avoid exposure when possible. Under the experimental conditions, particulate matter is deliberately minimized compared to natural water systems. Exposure conditions for the tests may therefore not be comparable for an organic chemical that has a high octanol-water partition coefficient or for an inorganic chemical that sorbs substantially onto particulate matter. The amount of the test substance in solution is thereby reduced in both cases, and therefore the material is less available to many organisms...
SCOPE
1.1 This guide describes procedures for obtaining laboratory data concerning bioconcentration of a test material added to dilution water—but not to food—by freshwater and saltwater fishes and saltwater bivalve mollusks using the flow-through technique. These procedures also should be useful for conducting bioconcentration tests with other aquatic species, although modifications might be necessary.  
1.2 Other modifications of these procedures might be justified by special needs or circumstances. Although using appropriate procedures is more important than following prescribed procedures, the results of tests conducted using unusual procedures are not likely to be comparable to those of many other tests. The comparison of results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting bioconcentration tests.  
1.3 These procedures are applicable to all chemicals that can be measured accurately at the necessary concentrations in water and in appropriate tissues. Bioconcentration tests are usually conducted on individual chemicals but can be conducted on mixtures if appropriate measurements can be made. Some techniques described in this guide were developed for tests on non-ionizable organic chemicals (see 11.1.2.1) and might not apply to ionizable or inorganic chemicals.  
1.4 Results of bioconcentration tests should usually be reported in terms of apparent steady-state and projected steady-state bioconcentration factors (BCFs) and uptake and depuration rate constants. Results should be reported in terms of whole body for fishes and in terms of total soft tissue for bivalve mollusks. For fishes and scallops consumed by humans, some results should also be reported in terms of the edible portion, especially if ingestion of the test material by humans is a major concern. For tests on organic and organometallic chemicals, the ...

  • Guide
    19 pages
    English language
    sale 15% off
ASTM
ASTM E1292-94(2022)(Specification)
Standard Specification for Gravity Convection and Forced Ventilation Incubators

ABSTRACT
This specification covers the performance requirements for general-purpose air incubators ordinarily used for incubating procedures. It is applicable to gravity and forced ventilation incubators designed to operate over a specified range of temperature. This specification does not include any requirements for the safe handling of harmful or disease bearing organisms. Temperature uniformity within a specified period of time shall be tested using several thermocouples.
SCOPE
1.1 This specification covers the performance requirements for general purpose air incubators ordinarily used for incubating procedures, which have an incubating chamber up to 0.6 m3 (25 ft3) in volume. It is applicable to gravity and forced ventilation incubators designed to operate over all or part of the temperature range from 5 °C above ambient to 75 °C.  
1.2 This specification does not include any requirements for the safe handling of harmful or disease bearing organisms.  
1.3 The following precautionary caveat pertains only to the test method portions, Sections 4, 5, and 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM E1563-21a(Guide)
Standard Guide for Conducting Short-Term Chronic Toxicity Tests with Echinoid Embryos

SIGNIFICANCE AND USE
5.1 An acute toxicity test is conducted to assess effects of a short-term exposure of organisms to a test material under specific experimental conditions. An acute toxicity test does not provide information concerning whether delayed effects will occur and typically evaluates effects on survival. A chronic test is typically longer in duration and includes a sublethal endpoint to assess effects on a population that might occur beyond the exposure period. Because the echinoderm embryo development test includes a sublethal endpoint, but is also short in duration, these tests are considered to be short-term chronic tests, consistent with EPA guidance.  
5.2 Because embryos and larvae are usually assumed to be the most sensitive life stages of these echinoid species, and because some of these species are commercially and recreationally important, the results of these tests are often considered to be a good indication of the acceptability of pollutant concentrations to saltwater species in general. The results of these toxicity tests are often assumed to be an important consideration when assessing the hazard of materials to other saltwater organisms (see Guides E724 and E1023) or when deriving water quality criteria for saltwater organisms  (7).  
5.3 The results of short-term chronic toxicity tests might be used to predict effects likely to occur to aquatic organisms in field situations as a result of exposure under comparable conditions, except that toxicity to benthic species might depend on sorption or settling of the test material onto the substrate.  
5.4 The results of short-term chronic tests might be used to compare the sensitivities of different species and the acute toxicities of different test materials, and to determine the effects of various environmental factors on the results of such tests.  
5.5 The results of short-term chronic toxicity tests might be useful for studying the biological availability of, and structure-activity relationships between, t...
SCOPE
1.1 This guide covers procedures for obtaining laboratory data concerning the short-term chronic effects of a test material on echinoderm embryos and the resulting larvae (sea urchins and sand dollars) during static 48- to 96-h exposures. These procedures have generally been used with U.S. East Coast (Arbacia punctulata and  Strongylocentrotus droebachiensis ) (1)3 and West Coast species (Strongylocentrotus purpuratus, S. droebachiensis, and Dendraster excentricus) (2). The basic procedures described in this guide first originated in Japan and Scandanavia  (3), and parallel procedures have been used with foreign species, especially in Japan and the Mediterranean  (4). These procedures will probably be useful for conducting static toxicity tests with embryos of other echinoid species, although modifications might be necessary.  
1.2 Other modifications of these procedures might be justified by special needs or circumstances. Although using procedures appropriate to a particular species or special needs and circumstances is more important than following prescribed procedures, the results of tests conducted by using unusual procedures are not likely to be comparable with those of many other tests. The comparison of results obtained by using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting tests starting with embryos of echinoids.  
1.3 These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications, these procedures can be used to conduct tests on temperature, dissolved oxygen, and pH and on such materials as aqueous effluents (see also Guide E1192), leachates, oils, particulate matter, surface waters, effluents, and sediments (Annex A1). Renewal tests might be preferable to static tests for materials that have a high oxygen demand, are...

  • Guide
    23 pages
    English language
    sale 15% off
  • Guide
    23 pages
    English language
    sale 15% off