iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F2266-03

(Specification)

Standard Specification for Masses Used in Testing Rescue Systems and Components

Standard Specification for Masses Used in Testing Rescue Systems and Components

ABSTRACT
This specification defines the masses to be used when testing rescue systems and components. The masses represent personnel and equipment that may be attached to a rescue system or components. However, the masses do not represent any particular type or kind of rescuer or equipment. The masses shall be classified as follows: Type I; Type II; Type III; Type IV; and Type V.
SCOPE
1.1 This specification defines the masses to be used when testing rescue systems and components.
1.2 The masses represent personnel and equipment that may be attached to a rescue system or components. However, the masses do not represent any particular type or kind of rescuer or equipment.
1.2.1 The masses chosen have been used in the past or are in current use in testing of rescue systems and components. Limiting testing to the masses listed in this specification allows meaningful comparisons between past, current, and future test results.
1.3 The user of this specification shall determine which mass(es) represent(s) the personnel and equipment attached to the system or component under test.
1.4 For the purposes of this specification, mass and weight are synonymous when the object(s) representing the mass(es) are weighed in air anywhere on Earth.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

General Information

Status
Historical
Publication Date
09-Apr-2003
ICS
11.160 - First aid
13.200 - Accident and disaster control
Technical Committee
F32 - Search and Rescue
Drafting Committee
F32.01 - Equipment, Testing, and Maintenance
Current Stage
Ref Project

Relations

Replaced By
ASTM F2266-03(2008)e1 - Standard Specification for Masses Used in Testing Rescue Systems and Components
Effective Date
01-Nov-2008
Referred By
ASTM F2436-14(2019) - Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
Effective Date
10-Apr-2003
Referred By
ASTM F2822-10(2016) - Standard Specification for Fixed Anchorages Installed on Structures used for Rope Rescue Training
Effective Date
10-Apr-2003

Buy Standard

ASTM F2266-03 - Standard Specification for Masses Used in Testing Rescue Systems and ComponentsASTM F2266-03 - Standard Specification for Masses Used in Testing Rescue Systems and Components
PreviousNext
Technical specification
ASTM F2266-03 - Standard Specification for Masses Used in Testing Rescue Systems and Components
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F 2266 – 03
Standard Specification for
Masses Used in Testing Rescue Systems and Components
This standard is issued under the fixed designation F 2266; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 2.3 European Committee for Standardization (CEN) Stan-
dard:
1.1 This specification defines the masses to be used when
EN1891 Personal Protective Equipment for the Prevention
testing rescue systems and components.
of Falls from a Height—Low Stretch Kernmantel Ropes
1.2 The masses represent personnel and equipment that may
be attached to a rescue system or components. However, the
3. Terminology
masses do not represent any particular type or kind of rescuer
3.1 Definitions of Terms Specific to This Standard:
or equipment.
3.1.1 rescue system, n—an assembly of ropes, cables, lines,
1.2.1 The masses chosen have been used in the past or are
and other components that may be used to raise, lower,
in current use in testing of rescue systems and components.
suspend, support, or traverse persons or equipment during a
Limiting testing to the masses listed in this specification allows
rescue.
meaningful comparisons between past, current, and future test
results.
4. Classification
1.3 The user of this specification shall determine which
4.1 Type I—80 6 1 kg.
mass(es) represent(s) the personnel and equipment attached to
4.1.1 ThesourceofthismassistheUnionInternationaledes
the system or component under test.
Associations d’Alpinisme (UIAA) and is the mass used in its
1.4 For the purposes of this specification, mass and weight
mountaineering equipment standards.
are synonymous when the object(s) representing the mass(es)
4.2 Type II—100 6 1 kg.
are weighed in air anywhere on Earth.
4.2.1 The sources of this mass are:
1.5 This standard does not purport to address all of the
4.2.1.1 ANSI standard Z359.1.
safety concerns, if any, associated with its use. It is the
4.2.1.2 CEN standard EN1891.
responsibility of the user of this standard to establish appro-
4.3 Type III—136 6 1 kg.
priate safety and health practices and determine the applica-
4.3.1 The source of this mass is NFPAstandard NFPA1983.
bility of regulatory requirements prior to use.
4.4 Type IV—200 kg 61%.
4.4.1 The source of this mass is testing performed by the
2. Referenced Documents
British Columbia Council of Technical Rescue (BCCTR).
2.1 National Fire Protection Association (NFPA) Stan-
2 4.5 Type V—280 kg 61%.
dard:
4.5.1 The source of this mass is testing performed by the
NFPA1983 Standard for Fire Service Life Safety Rope and
BCCTR. It is a metric conversion, rounded up, of the 272 kg
System Components
(600 lb) mass originally developed by the NFPA.
2.2 American National Standards Institute (ANSI) Stan-
dard:
5. Keywords
ANSI Z359.1 Safety Requirements for Personal Fall Arrest
5.1 component; mass; rescue; system; test
Systems, Sub-Systems and Components
This specification is under the jurisdiction ofASTM Committee F32 on Search
and Rescue and is the di
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F3144-15(2022)(Guide)
Standard Guide for Evaluating Trailing Search Dog Crews or Teams

SIGNIFICANCE AND USE
4.1 A trailing search dog crew or team is required to have, at a minimum, the knowledge, skills, and abilities outlined within this guide.  
4.1.1 A trailing search dog crew or team that meets the requirements of this guide is a Trailing Canine Search Resource, as defined in Classification F1848.  
4.2 Trailing search dogs that meet the requirements of this guide shall be tested by the AHJ using an aged trail of 6 to 12 h or as determined by the AHJ. Ages for competency trails shall take into consideration a minimum age, which should approximate the average response time for search dog crews.  
4.3 This guide only establishes the minimum knowledge, skills, and abilities required for a trailing search dog crew or team to perform trail searches. No other skills are included or implied.  
4.4 This guide is an outline of the topics required for training or evaluating a trailing search dog team or crew, and may be used to assist in the development of a training document or program.  
4.5 This guide can be used to evaluate a document to determine if its content includes the topics necessary for training trailing search dog crews or teams. Likewise, this guide can be used to evaluate an existing training program to see if it meets the requirements in this guide.  
4.6 The knowledge, skills, and abilities presented in this guide are not in any particular order and do not represent a training sequence.  
4.7 Though this guide establishes minimum training requirements, it does not imply that a trailing search dog team or crew is a “trainee,” “probationary,” or other similarly termed part of an organization.  
4.7.1 The AHJ is responsible for determining the requirements and qualifications for its member ratings.  
4.8 A trailing search dog crew or team shall document training by completion of a position task book, compliant with Guide F3068, or by field demonstration under qualified supervision. Where proficiency in a skill or ability must be demonstrated, unless oth...
SCOPE
1.1 This guide defines the knowledge, skills, and abilities required for a dog crew or team to perform a trailing search.  
1.2 Trailing search dog crews or teams perform searches on the surface of the land, including open urban or wilderness areas, as well as mountainous terrain and alpine environments.  
1.2.1 Additional training shall be required for trailing search dog crews or teams that search in mountainous terrain, alpine environments, and in caves, mines, and tunnels.  
1.3 This guide does not include the knowledge, skills, and abilities required to search in partially or fully collapsed structures, confined spaces, or on bodies of water, inland or oceanic.  
1.4 Trailing search dog crews or teams trained to meet the requirements of this guide may operate in urban and disaster areas that may be isolated or have lost their infrastructure.  
1.5 Trailing search dog crews or teams must work under qualified supervision deemed appropriate by the AHJ.  
1.6 Search dog crews or teams are eligible to be members of Type I and II SAR crews or teams of the following Kinds, as defined in Classification F1993:  
1.6.1 Kind A (Wilderness);  
1.6.2 Kind B (Urban);  
1.6.3 Kind C (Mountainous);  
1.6.4 Kind G (Cave);  
1.6.5 Kind H (Mine);  
1.6.6 Kind I (Avalanche);  
1.6.7 Kind K (Aircraft); and  
1.6.8 Kind L (Unclassified).  
1.7 Further training may be required before a trailing search dog crew or team can fully participate on a particular Type and Kind of team or crew, based on specific local needs, regulations, or policies.  
1.8 This guide does not provide a theoretical basis for how a trailing search dog crew or team functions.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory l...

  • Guide
    5 pages
    English language
    sale 15% off
ASTM
ASTM F3070-14(2022)(Guide)
Standard Guide for Evaluating Area Search Dog Crews or Teams

SIGNIFICANCE AND USE
4.1 An area search dog crew or team is required to have, at a minimum, the knowledge, skills, and abilities outlined within this document.  
4.1.1 An area search dog crew or team which meets the requirements in this guide is a Canine Search Resource of the category Area Search Dog as defined in Classification F1848 for Canine Search Resources.  
4.1.2 Additional differentiation of the specific Canine Search Resource is defined in Classification F1848 for Canine Search Resources.  
4.2 This guide only establishes the minimum knowledge, skills, and abilities required for an area search dog crew or team to perform area searches. No other skills are included or implied.  
4.3 This guide is an outline of the topics required for training or evaluating an area search dog team or crew, and may be used to assist in the development of a training document or program.  
4.4 This guide can be used to evaluate a document to determine if its content includes the topics necessary for training area search dog crews or teams. Likewise, this guide can be used to evaluate an existing training program to see if it meets the requirements in this guide.  
4.5 The knowledge, skills, and abilities presented in this guide are not in any particular order and do not represent a training sequence.  
4.6 Though this guide establishes minimum training requirements, it does not imply that an area search dog team or crew is a “trainee,” “probationary,” or other similarly termed part of an organization.  
4.6.1 The AHJ is responsible for determining the requirements and qualifications for its member ratings.  
4.7 An area search dog crew or team shall document training by completion of a position task book, compliant with Guide F3068, or by field demonstration under qualified supervision. Where proficiency in a skill or ability must be demonstrated, unless stated otherwise it shall be demonstrated for initial qualification, and then as often as required by the AHJ.
SCOPE
1.1 This guide defines the knowledge, skills, and abilities required for a dog crew or team to perform an area search.  
1.2 Area search dog crews or teams perform searches on the surface of the land, including open urban or wilderness areas, as well as mountainous terrain and alpine environments.  
1.2.1 Additional training shall be required for area search dog crews or teams that search in mountainous terrain, alpine environments, or underground.  
1.3 This guide does not include the knowledge, skills, and abilities required to search in partially or fully collapsed structures, confined spaces, or on bodies of water, inland or oceanic.  
1.4 Area search dog crews or teams trained to meet the requirements of this guide may operate in urban and disaster areas that may be isolated or have lost their infrastructure.  
1.5 Area search dog crews or teams must work under qualified supervision deemed appropriate by the AHJ.  
1.6 This guide does not provide a theoretical basis for how an area search dog crew or team functions.  
1.7 Search dog crews or teams are eligible to be members of Type I and II SAR crews or teams of the following Kinds, as defined in Classification F1993:  
1.7.1 Kind A (Wilderness),  
1.7.2 Kind B (Urban),  
1.7.3 Kind C (Mountainous),  
1.7.4 Kind G (Cave),  
1.7.5 Kind H (Mine),  
1.7.6 Kind I (Avalanche),  
1.7.7 Kind K (Aircraft), and  
1.7.8 Kind L (Unclassified).  
1.8 Further training may be required before an area search dog crew or team can fully participate on a particular Type and Kind of team or crew, based on specific local needs, regulations, or policies.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was develop...

  • Guide
    9 pages
    English language
    sale 15% off
ASTM
ASTM F3144-15(2022)(Guide)
Standard Guide for Evaluating Trailing Search Dog Crews or Teams

SIGNIFICANCE AND USE
4.1 A trailing search dog crew or team is required to have, at a minimum, the knowledge, skills, and abilities outlined within this guide.  
4.1.1 A trailing search dog crew or team that meets the requirements of this guide is a Trailing Canine Search Resource, as defined in Classification F1848.  
4.2 Trailing search dogs that meet the requirements of this guide shall be tested by the AHJ using an aged trail of 6 to 12 h or as determined by the AHJ. Ages for competency trails shall take into consideration a minimum age, which should approximate the average response time for search dog crews.  
4.3 This guide only establishes the minimum knowledge, skills, and abilities required for a trailing search dog crew or team to perform trail searches. No other skills are included or implied.  
4.4 This guide is an outline of the topics required for training or evaluating a trailing search dog team or crew, and may be used to assist in the development of a training document or program.  
4.5 This guide can be used to evaluate a document to determine if its content includes the topics necessary for training trailing search dog crews or teams. Likewise, this guide can be used to evaluate an existing training program to see if it meets the requirements in this guide.  
4.6 The knowledge, skills, and abilities presented in this guide are not in any particular order and do not represent a training sequence.  
4.7 Though this guide establishes minimum training requirements, it does not imply that a trailing search dog team or crew is a “trainee,” “probationary,” or other similarly termed part of an organization.  
4.7.1 The AHJ is responsible for determining the requirements and qualifications for its member ratings.  
4.8 A trailing search dog crew or team shall document training by completion of a position task book, compliant with Guide F3068, or by field demonstration under qualified supervision. Where proficiency in a skill or ability must be demonstrated, unless oth...
SCOPE
1.1 This guide defines the knowledge, skills, and abilities required for a dog crew or team to perform a trailing search.  
1.2 Trailing search dog crews or teams perform searches on the surface of the land, including open urban or wilderness areas, as well as mountainous terrain and alpine environments.  
1.2.1 Additional training shall be required for trailing search dog crews or teams that search in mountainous terrain, alpine environments, and in caves, mines, and tunnels.  
1.3 This guide does not include the knowledge, skills, and abilities required to search in partially or fully collapsed structures, confined spaces, or on bodies of water, inland or oceanic.  
1.4 Trailing search dog crews or teams trained to meet the requirements of this guide may operate in urban and disaster areas that may be isolated or have lost their infrastructure.  
1.5 Trailing search dog crews or teams must work under qualified supervision deemed appropriate by the AHJ.  
1.6 Search dog crews or teams are eligible to be members of Type I and II SAR crews or teams of the following Kinds, as defined in Classification F1993:  
1.6.1 Kind A (Wilderness);  
1.6.2 Kind B (Urban);  
1.6.3 Kind C (Mountainous);  
1.6.4 Kind G (Cave);  
1.6.5 Kind H (Mine);  
1.6.6 Kind I (Avalanche);  
1.6.7 Kind K (Aircraft); and  
1.6.8 Kind L (Unclassified).  
1.7 Further training may be required before a trailing search dog crew or team can fully participate on a particular Type and Kind of team or crew, based on specific local needs, regulations, or policies.  
1.8 This guide does not provide a theoretical basis for how a trailing search dog crew or team functions.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory l...

  • Guide
    5 pages
    English language
    sale 15% off
ASTM
ASTM F3070-14(2022)(Guide)
Standard Guide for Evaluating Area Search Dog Crews or Teams

SIGNIFICANCE AND USE
4.1 An area search dog crew or team is required to have, at a minimum, the knowledge, skills, and abilities outlined within this document.  
4.1.1 An area search dog crew or team which meets the requirements in this guide is a Canine Search Resource of the category Area Search Dog as defined in Classification F1848 for Canine Search Resources.  
4.1.2 Additional differentiation of the specific Canine Search Resource is defined in Classification F1848 for Canine Search Resources.  
4.2 This guide only establishes the minimum knowledge, skills, and abilities required for an area search dog crew or team to perform area searches. No other skills are included or implied.  
4.3 This guide is an outline of the topics required for training or evaluating an area search dog team or crew, and may be used to assist in the development of a training document or program.  
4.4 This guide can be used to evaluate a document to determine if its content includes the topics necessary for training area search dog crews or teams. Likewise, this guide can be used to evaluate an existing training program to see if it meets the requirements in this guide.  
4.5 The knowledge, skills, and abilities presented in this guide are not in any particular order and do not represent a training sequence.  
4.6 Though this guide establishes minimum training requirements, it does not imply that an area search dog team or crew is a “trainee,” “probationary,” or other similarly termed part of an organization.  
4.6.1 The AHJ is responsible for determining the requirements and qualifications for its member ratings.  
4.7 An area search dog crew or team shall document training by completion of a position task book, compliant with Guide F3068, or by field demonstration under qualified supervision. Where proficiency in a skill or ability must be demonstrated, unless stated otherwise it shall be demonstrated for initial qualification, and then as often as required by the AHJ.
SCOPE
1.1 This guide defines the knowledge, skills, and abilities required for a dog crew or team to perform an area search.  
1.2 Area search dog crews or teams perform searches on the surface of the land, including open urban or wilderness areas, as well as mountainous terrain and alpine environments.  
1.2.1 Additional training shall be required for area search dog crews or teams that search in mountainous terrain, alpine environments, or underground.  
1.3 This guide does not include the knowledge, skills, and abilities required to search in partially or fully collapsed structures, confined spaces, or on bodies of water, inland or oceanic.  
1.4 Area search dog crews or teams trained to meet the requirements of this guide may operate in urban and disaster areas that may be isolated or have lost their infrastructure.  
1.5 Area search dog crews or teams must work under qualified supervision deemed appropriate by the AHJ.  
1.6 This guide does not provide a theoretical basis for how an area search dog crew or team functions.  
1.7 Search dog crews or teams are eligible to be members of Type I and II SAR crews or teams of the following Kinds, as defined in Classification F1993:  
1.7.1 Kind A (Wilderness),  
1.7.2 Kind B (Urban),  
1.7.3 Kind C (Mountainous),  
1.7.4 Kind G (Cave),  
1.7.5 Kind H (Mine),  
1.7.6 Kind I (Avalanche),  
1.7.7 Kind K (Aircraft), and  
1.7.8 Kind L (Unclassified).  
1.8 Further training may be required before an area search dog crew or team can fully participate on a particular Type and Kind of team or crew, based on specific local needs, regulations, or policies.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was develop...

  • Guide
    9 pages
    English language
    sale 15% off
ASTM
ASTM D6511/D6511M-18(2024)(Test Method)
Standard Test Methods for Solvent Bearing Bituminous Compounds

SIGNIFICANCE AND USE
3.1 These tests are useful in sampling and testing solvent bearing bituminous compounds to establish uniformity of shipments.
SCOPE
1.1 These test methods cover procedures for sampling and testing solvent bearing bituminous compounds for use in roofing and waterproofing.  
1.2 The test methods appear in the following order:    
Section  
Sampling  
4  
Uniformity  
5  
Weight per gallon  
6  
Nonvolatile content  
7  
Solubility  
8  
Ash content  
9  
Water content  
10  
Consistency  
11  
Behavior at 60 °C [140 °F]  
12  
Pliability at –0 °C [32 °F]  
13  
Aluminum content  
14  
Reflectance of aluminum roof coatings  
15  
Strength of laps of rolled roofing adhered with roof adhesive  
16  
Adhesion to damp, wet, or underwater surfaces  
17  
Mineral stabilizers and bitumen  
18  
Mineral matter  
19  
Volatile organic content  
20  
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    9 pages
    English language
    sale 15% off
ASTM
ASTM C394/C394M-16(2024)(Test Method)
Standard Test Method for Shear Fatigue of Sandwich Core Materials

SIGNIFICANCE AND USE
5.1 Often the most critical stress to which a sandwich panel core is subjected is shear. The effect of repeated shear stresses on the core material can be very important, particularly in terms of durability under various environmental conditions.  
5.2 This test method provides a standard method of obtaining the sandwich core shear fatigue response. Uses include screening candidate core materials for a specific application, developing a design-specific core shear cyclic stress limit, and core material research and development.
Note 3: This test method may be used as a guide to conduct spectrum loading. This information can be useful in the understanding of fatigue behavior of core under spectrum loading conditions, but is not covered in this standard.  
5.3 Factors that influence core fatigue response and shall therefore be reported include the following: core material, core geometry (density, cell size, orientation, etc.), specimen geometry and associated measurement accuracy, specimen preparation, specimen conditioning, environment of testing, specimen alignment, loading procedure, loading frequency, force (stress) ratio and speed of testing (for residual strength tests).
Note 4: If a sandwich panel is tested using the guidance of this standard, the following may also influence the fatigue response and should be reported: facing material, adhesive material, methods of material fabrication, adhesive thickness and adhesive void content. Further, core-to-facing strength may be different between precured/bonded and co-cured facings in sandwich panels with the same core and facing materials.
SCOPE
1.1 This test method determines the effect of repeated shear forces on core material used in sandwich panels. Permissible core material forms include those with continuous bonding surfaces (such as balsa wood and foams) as well as those with discontinuous bonding surfaces (such as honeycomb).  
1.2 This test method is limited to test specimens subjected to constant amplitude uniaxial loading, where the machine is controlled so that the test specimen is subjected to repetitive constant amplitude force (stress) cycles. Either shear stress or applied force may be used as a constant amplitude fatigue variable.  
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. Within the text, the inch-pound units are shown in brackets.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM E1894-24(Guide)
Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources

SIGNIFICANCE AND USE
4.1 Flash X-ray facilities provide intense bremsstrahlung radiation environments, usually in a single sub-microsecond pulse, which often fluctuates in amplitude, shape, and spectrum from shot to shot. Therefore, appropriate dosimetry must be fielded on every exposure to characterize the environment, see ICRU Report 34. These intense bremsstrahlung sources have a variety of applications which include the following:
(1) Studies of the effects of X-rays and gamma rays on materials.
(2) Studies of the effects of radiation on electronic devices such as transistors, diodes, and capacitors.
(3) Computer code validation studies.  
4.2 This guide is written to assist the experimenter in selecting the needed dosimetry systems for use at pulsed X-ray facilities. This guide also provides a brief summary on how to use each of the dosimetry systems. Other guides (see Section 2) provide more detailed information on selected dosimetry systems in radiation environments and should be consulted after an initial decision is made on the appropriate dosimetry system to use. There are many key parameters which describe a flash X-ray source, such as dose, dose rate, spectrum, pulse width, etc., such that typically no single dosimetry system can measure all the parameters simultaneously. However, it is frequently the case that not all key parameters must be measured in a given experiment.
SCOPE
1.1 This guide provides assistance in selecting and using dosimetry systems in flash X-ray experiments. Both dose and dose rate techniques are described.  
1.2 Operating characteristics of flash X-ray sources are given, with emphasis on the spectrum of the photon output.  
1.3 Assistance is provided to relate the measured dose to the response of a device under test (DUT). The device is assumed to be a semiconductor electronic part or system.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    19 pages
    English language
    sale 15% off
  • Guide
    19 pages
    English language
    sale 15% off
ASTM
ASTM D1187/D1187M-97(2024)(Specification)
Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal

ABSTRACT
This specification establishes the manufacture, testing, and performance requirements of two types of asphalt-based emulsions for use in a relatively thick film as a protective coating for metal surfaces. Type I are quick-setting emulsified asphalt suitable for continuous exposure to water within a few days after application and drying. Type II, on the other hand, are emulsified asphalt suitable for continuous exposure to the weather, only after application and drying. Upon being sampled appropriately, the materials shall conform to composition requirements as to density, residue by evaporation, nonvolatile matter soluble in trichloroethylene, and ash and water content. They shall also adhere to performance requirements as to uniformity, consistency, stability, wet flow, firm set, heat test, flexibility, resistance to water, and loss of adhesion.
SCOPE
1.1 This specification covers emulsified asphalt suitable for application in a relatively thick film as a protective coating for metal surfaces.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D187-24(Test Method)
Standard Test Method for Burning Quality of Kerosene

SIGNIFICANCE AND USE
5.1 Since the information provided by this test method is largely qualitative in nature, specific limits covering the following characteristics are required in referring to this test method in specifications for kerosene:  
5.1.1 Duration of the test: 16 h is understood, if not otherwise specified;  
5.1.2 Permissible change in flame shape and dimensions during the test;  
5.1.3 Description of the acceptable appearance of the chimney deposit.
SCOPE
1.1 This test method covers the qualitative determination of the burning properties of kerosene to be used for illuminating purposes. (Warning—Combustible. Vapor harmful.)
Note 1: The corresponding Energy Institute (IP) test method is IP 10 which features a quantitative evaluation of the wick-char-forming tendencies of the kerosene, whereas Test Method D187 features a qualitative performance evaluation of the kerosene. Both test methods subject the kerosene to somewhat more severe operating conditions than would be experienced in typical designated applications.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning statements appear throughout the test method.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D88/D88M-07(2024)(Test Method)
Standard Test Method for Saybolt Viscosity

SIGNIFICANCE AND USE
5.1 This test method is useful in characterizing certain petroleum products, as one element in establishing uniformity of shipments and sources of supply.  
5.2 See Guide D117 for applicability to mineral oils used as electrical insulating oils.  
5.3 The Saybolt Furol viscosity is approximately one tenth the Saybolt Universal viscosity, and is recommended for characterization of petroleum products such as fuel oils and other residual materials having Saybolt Universal viscosities greater than 1000 s.  
5.4 Determination of the Saybolt Furol viscosity of bituminous materials at higher temperatures is covered by Test Method E102/E102M.
SCOPE
1.1 This test method covers the empirical procedures for determining the Saybolt Universal or Saybolt Furol viscosities of petroleum products at specified temperatures between 21 and 99 °C [70 and 210 °F]. A special procedure for waxy products is indicated.  
Note 1: Test Methods D445 and D2170/D2170M are preferred for the determination of kinematic viscosity. They require smaller samples and less time, and provide greater accuracy. Kinematic viscosities may be converted to Saybolt viscosities by use of the tables in Practice D2161. It is recommended that viscosity indexes be calculated from kinematic rather than Saybolt viscosities.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off