ASTM D3105-08

Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

SIGNIFICANCE AND USE
Where more than one test method or testing condition is listed for the same characteristic in this index, selection of the methods and conditions to be followed must be governed by experience and the requirements in each individual case, together with agreement between the purchaser and seller. The user of this standard must be cautioned that results obtained by different test methods and different conditions of test are not directly comparable.
SCOPE
1.1 This index is provided for reference to aid in the selection of procedures and test methods used in the evaluation of sheet and liquid roofing materials, as appropriate. Composition specifications and analytical methods in general, as well as tests on raw materials, are not included, the scope being limited to procedures used in the evaluation of the materials as received or as finished materials or coatings.

General Information

• Status: Historical
• Publication Date: 31-Dec-2007
• ICS: 83.140.10 - Films and sheets
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: D08 - Roofing and Waterproofing
• Drafting Committee: D08.01 - Nomenclature, Definitions and Editorial

Relations

• Replaces: ASTM D3105-99 - Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
• Effective Date: 01-Jan-2008

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D3105 −08
Standard Index of Methods for
Testing Elastomeric and Plastomeric Roofing and
1
Waterproofing Materials
This standard is issued under the fixed designation D3105; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope together with agreement between the purchaser and seller. The
user of this standard must be cautioned that results obtained by
1.1 This index is provided for reference to aid in the
different test methods and different conditions of test are not
selection of procedures and test methods used in the evaluation
directly comparable.
of sheet and liquid roofing materials, as appropriate. Compo-
sition specifications and analytical methods in general, as well
3. Precision
as tests on raw materials, are not included, the scope being
3.1 Precision data for any procedure or test method selected
limited to procedures used in the evaluation of the materials as
are given in the latest issue of the subject test procedure.
received or as finished materials or coatings.
4. Categories
2. Significance and Use
2
4.1 For convenience in selection, the test methods are
2.1 Where more than one test method or testing condition is
indexed in three major groups, as follows:
listed for the same characteristic in this index, selection of the
4.1.1 Dimensions and Masses of Sheet Applied Products
methods and conditions to be followed must be governed by
(Section 5).
experience and the requirements in each individual case,
4.1.2 Film and Sheet Characteristics (Section 6).
4.1.3 Liquid Applied Systems (Section 7).
1
This index of methods is under the jurisdiction of ASTM Committee D08 on
Roofing and Waterproofingand is the direct responsibility of Subcommittee D08.01
2
on Nomenclature, Definitions and Editorial. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Jan. 1, 2008. Published February 2008. Originally contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
approved in 1972. Last previous edition approved in 1999 as D3105 – 99. DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/D3105-08. the ASTM website.
Copyright ©ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA19428-2959. United States
1

---------------------- Page: 1 ----------------------
D3105−08
TABLE 1 INDEX OF METHODS
ASTM
PHYSICALTEST ASTM TITLE DESIGNATION
5. Dimensions and Masses of Sheet Applied Products
5.1 Length Test Methods for Coated Fabrics D751
Test Methods for Sampling, Testing, andAnalysis ofAsphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and
Waterproofing (Section 7) D228
5.2 Thickness Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension (Measuring Thickness) D412
Test Method for Tensile Properties of Plastics (Measuring Thickness) D638
Test Methods of Testing Coated Fabrics (Section 6) D751
Test Methods for Sampling and Testing Modified Bituminous Sheet Material (Section 5) D5147
5.3 Mass Test Methods of Testing Coated Fabrics (Section 7) D751
Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing (Sec-
tion 5) D146
Test Methods for Sampling, Testing, andAnalysis ofAsphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and
Waterproofing (Section 7) D228
5.4 Width Test Methods of Testing Coated Fabrics (Section 5) D751
Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing (8.1) D146
Test Methods for Sampling, Testing, andAnalysis ofAsphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and
Waterproofing (7.4) D228
6. Film and Sheet Characteristics
6.1 Abrasion Resistance Test Method for Coated FabricsAbrasion Resistance (Rotary Platform Double-HeadAbrader) D3389
Test Method for GranuleAdhesion to Mineral Surfaced Roofing byAbrasion D4977
6.2 Artificial Weathering Test Method for Rubber Deterioration in Carbon-Arc WeatheringApparatus D750
Practice for Operating Light- and Water-ExposureApparatus (Carbon-Arc Type) for Exposure of Plastics D1499
Practice for Operating XenonArc-Type Light-ExposureApparatus With and Without Water for Exposure of Plastics D2565
Test Methods for Sampling and Testing Modified Bituminous Sheet Material (Section 13) D5147
Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials D5869
Practice for HeatAging of Plastics Without Load D3045
Test Method forAccelerated Weathering Test Conditions and Procedures for Bituminous Materials (Carbon-Arc Method) D529
Test Method forAccelerated Weathering Test Condi
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:D3105–99 Designation: D 3105 – 08
Standard Index of Methods for
Testing Elastomeric and Plastomeric Roofing and
1
Waterproofing Materials
This standard is issued under the fixed designation D 3105; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This index is provided for reference to aid in the selection of procedures and test methods used in the evaluation of
Sheetsheet and Liquid Roofing Materials,liquid roofing materials, as appropriate. Composition specifications and analytical
methods in general, as well as tests on raw materials, are not included, the scope being limited to procedures used in the evaluation
of the materials as received or as finished materials or coatings.
2. Significance and Use
2.1 Where more than one test method or testing condition is listed for the same characteristic in this index, selection of the
methods and conditions to be followed must be governed by experience and the requirements in each individual case, together with
agreement between the purchaser and seller. The user of this standard must be cautioned that results obtained by different test
methods and different conditions of test are not directly comparable.
3. Precision
3.1 Precision data for any procedure or test method selected are given in the latest issue of the subject test procedure.
4. Categories
2
4.1 For convenience in selection, the test methods are indexed in three major groups, as follows:
4.1.1 Dimensions and Masses of Sheet Applied Products (Section 5).
4.1.2 Film and Sheet Characteristics (Section 6).
4.1.3 Liquid Applied Systems (Section 7).
TABLE 1 INDEX OF METHODS
ASTM
PHYSICALTEST ASTM TITLE ASTM DESIGNATION
5. Dimensions and Masses of Sheet Applied Products
5.1 Length Test Methods for Coated Fabrics D751
Test Methods for Sampling, Testing, andAnalysis ofAsphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and
Waterproofing (Section 7) D228
5.2 Thickness Test Methods for Vulcanized Rubber and Thermoplastic Elastomers -Tension (Measuring Thickness) D412
5.2 Thickness Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension (Measuring Thickness) D412
Test Method for Tensile Properties of Plastics (Measuring Thickness) D638
Test Methods of Testing Coated Fabrics (Section 6) D751
Test Methods for Sampling and Testing Modified Bituminous Sheet Material (Section 5) D5147
5.3 Mass Test Methods of Testing Coated Fabrics (Section 7) D751
Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
(Section 5) D146
Test Methods forAsphalt Roll Roofing, Cap Sheets and Shingles (Section 7) D228
1
This index of methods is under the jurisdiction of ASTM Committee D-8 on Roofing, Waterproofing, and Bituminous Materials and is the direct responsibility of
Subcommittee D08.18 on Nonbituminous Organic Roof Coverings.
Current edition approved July 10, 1999. Published September 1999. Originally published as D3105–72. Last previous edition D3105–90.
1
This index of methods is under the jurisdiction of ASTM Committee D08 on Roofing and Waterproofing and is the direct responsibility of Subcommittee D08.01 on
Nomenclature, Definitions and Editorial.
Current edition approved Jan. 1, 2008. Published February 2008. Originally approved in 1972. Last previous edition approved in 1999 as D 3105 – 99.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book ofASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright ©ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D3105–08
ASTM
PHYSICALTEST ASTM TITLE ASTM DESIGNATION
Test Methods for Sampling, Testing, andAnalysis ofAsphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and
Waterproofing (Section 7) D228
5.4 Width Test Methods of Testing Coated Fabrics (Section 5) D751
Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing (8.1) D146
Test Methods forAsphalt Roll Roofing, Cap Sheets and Shingles (7.4) D228
Test Methods for Sampling, Testing, andAnalysis ofAsphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing
...