ASTM D2349-90(2020)
(Test Method)Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
SIGNIFICANCE AND USE
3.1 This test method provides a procedure for determining qualitatively the composition of solvent in paints containing only hydrocarbon solvents.
SCOPE
1.1 This test method covers the determination of the nature of solvent in solvent-reducible house paints containing only hydrocarbon solvents.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D2349 − 90 (Reapproved 2020)
Standard Test Method for Qualitative Determination of
Nature of Solvent Composition in Solvent-Reducible Paints
This standard is issued under the fixed designation D2349; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 4. Reagents
4.1 Purity of Reagents—Reagent grade chemicals shall be
1.1 This test method covers the determination of the nature
used in all tests. Unless otherwise indicated, it is intended that
of solvent in solvent-reducible house paints containing only
all reagents shall conform to the specifications of the Commit-
hydrocarbon solvents.
tee onAnalytical Reagents of theAmerican Chemical Society,
1.2 The values stated in SI units are to be regarded as
where such specifications are available. Other grades may be
standard. No other units of measurement are included in this
used, provided it is first ascertained that the reagent is of
standard.
sufficiently high purity to permit its use without lessening the
1.3 This standard does not purport to address all of the
accuracy of the determination.
safety concerns, if any, associated with its use. It is the
4.2 Purity of Water—Unless otherwise indicated, references
responsibility of the user of this standard to establish appro-
to water shall be understood to mean reagent water conforming
priate safety, health, and environmental practices and deter-
to Type IV of Specification D1193.
mine the applicability of regulatory limitations prior to use.
4.3 Antimony Pentachloride (SbCl ).
1.4 This international standard was developed in accor-
dance with internationally recognized principles on standard- 4.4 Chloroform.
ization established in the Decision on Principles for the
4.5 Nitric Acid (sp gr 1.42)—Concentrated nitric acid
Development of International Standards, Guides and Recom-
(HNO ).
mendations issued by the World Trade Organization Technical
4.6 Sulfuric Acid (sp gr 1.84)—Concentrated sulfuric acid
Barriers to Trade (TBT) Committee.
(H SO ).
2 4
2. Referenced Documents
5. Preparation of Sample
2.1 ASTM Standards:
5.1 Mix and prepare the sample in accordance with Practice
D215 Practice for the Chemical Analysis of White Linseed
D215.
Oil Paints (Withdrawn 2005)
6. Nature of Solvent
D233 Test Methods of Sampling and Testing Turpentine
D1193 Specification for Reagent Water
6.1 Transfer approximately 150 g of the paint to a 500-mL
flask fitted with a 2-hole cork stopper carrying a spray trap
3. Significance and Use
connected with a suitable condenser. Through the other hole in
the stopper pass an influx tube for steam. (This tube should dip
3.1 This test method provides a procedure for determining
below the surface of the paint.) Heat the flask in an oil or air
qualitatively the composition of solvent in paints containing
bath at 100°C and pass through it a current of steam; with the
only hydrocarbon solvents.
steam still passing through, raise the temperature of the bath to
130°C. Catch the distillate in a small separatory funnel;
continue distillation until 300 mLof water have been obtained.
This test method is under the jurisdiction of ASTM Committee D01 on Paint
Portions of this water may be drawn from the cock of the
and Related Coatings, Materials, andApplications and is the direct responsibility of
separatory funnel from time to time, but care must be taken not
Subcommittee D01.21 on Chemical Analysis of Paints and Paint Materials.
Current edition approved Feb. 1, 2020. Published February 2020. Originally
to draw out any of the volatile solvent.
approved in 1965. Last previous edition approved in 2014 as D2349 – 90 (2014).
DOI: 10.1520/D2349-90R20.
2 4
For referenc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.