iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D4850-13e1

(Terminology)

Standard Terminology Relating to Fabrics and Fabric Test Methods

Standard Terminology Relating to Fabrics and Fabric Test Methods

SCOPE
1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms related to textile fabrics are shown in 2.1

General Information

Status
Historical
Publication Date
30-Jun-2013
ICS
01.040.59 - Textile and leather technology (Vocabularies)
59.080.30 - Textile fabrics
Technical Committee
D13 - Textiles
Drafting Committee
D13.59 - Fabric Physical Test Methods A
Current Stage
Ref Project

Relations

Replaces
ASTM D4850-13 - Standard Terminology Relating to Fabrics and Fabric Test Methods
Effective Date
01-Jul-2013
Replaced By
ASTM D4850-13(2017) - Standard Terminology Relating to Fabrics and Fabric Test Methods
Effective Date
15-Jul-2017
Referred By
ASTM D4970/D4970M-22 - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
Effective Date
01-Jul-2013
Referred By
ASTM D3773/D3773M-10(2019) - Standard Test Methods for Length of Woven Fabric
Effective Date
01-Jul-2013
Referred By
ASTM D5035-11(2019) - Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Effective Date
01-Jul-2013
Referred By
ASTM D3107-07(2019) - Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
Effective Date
01-Jul-2013
Referred By
ASTM D5430-13(2017) - Standard Test Methods for Visually Inspecting and Grading Fabrics
Effective Date
01-Jul-2013
Referred By
ASTM F2207-06(2023) - Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
Effective Date
01-Jul-2013
Referred By
ASTM D3886-22 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
Effective Date
01-Jul-2013
Referred By
ASTM D3775-17(2023) - Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
Effective Date
01-Jul-2013
Referred By
ASTM D6775-13(2017) - Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
Effective Date
01-Jul-2013
Referred By
ASTM D4685/D4685M-15(2020) - Standard Test Method for Pile Fabric Abrasion
Effective Date
01-Jul-2013
Referred By
ASTM D3884-22 - Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform Abrader Method)
Effective Date
01-Jul-2013
Referred By
ASTM D4851-07(2019)e1 - Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
Effective Date
01-Jul-2013
Referred By
ASTM C1835-16(2023) - Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
Effective Date
01-Jul-2013

Buy Standard

ASTM D4850-13e1 - Standard Terminology Relating to Fabrics and Fabric Test MethodsASTM D4850-13e1 - Standard Terminology Relating to Fabrics and Fabric Test Methods
PreviousNext
Standard
ASTM D4850-13e1 - Standard Terminology Relating to Fabrics and Fabric Test Methods
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM D4850-13e1 - Standard Terminology Relating to Fabrics and Fabric Test MethodsREDLINE ASTM D4850-13e1 - Standard Terminology Relating to Fabrics and Fabric Test Methods
PreviousNext
Standard
REDLINE ASTM D4850-13e1 - Standard Terminology Relating to Fabrics and Fabric Test Methods
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
´1
Designation: D4850 − 13
Standard Terminology Relating to
1
Fabrics and Fabric Test Methods
This standard is issued under the fixed designation D4850; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Terms were added editorially in September 2016.
1. Scope D3512TestMethodforPillingResistanceandOtherRelated
Surface Changes of Textile Fabrics: Random Tumble
1.1 This terminology covers definitions of technical terms
Pilling Tester
used in the industry related to textile fabrics. Terms that are
D3514TestMethodforPillingResistanceandOtherRelated
generally understood or adequately defined in other readily
Surface Changes of Textile Fabrics: Elastomeric Pad
available sources are not included. Other terminology stan-
D3773Test Methods for Length of Woven Fabric
dardsthathavetermsrelatedtotextilefabricsareshownin2.1
D3774Test Method for Width of Textile Fabric
2. Referenced Documents
D3775TestMethodforWarp(End)andFilling(Pick)Count
2
of Woven Fabrics
2.1 ASTM Standards:
D737Test Method for Air Permeability of Textile Fabrics D3776Test Methods for Mass Per Unit Area (Weight) of
D1230Test Method for Flammability of Apparel Textiles Fabric
D1336TestMethodforDistortionofYarninWovenFabrics
D3786 Test Method for Bursting Strength of Textile
D1388Test Method for Stiffness of Fabrics
Fabrics—Diaphragm Bursting Strength Tester Method
D1424Test Method for Tearing Strength of Fabrics by
D3787Test Method for Bursting Strength of Textiles—
Falling-Pendulum (Elmendorf-Type) Apparatus
Constant-Rate-of-Traverse (CRT) Ball Burst Test
D1775Test Method for Tension and Elongation of Wide
D3789Practice for Labeling Cans of Consumer Spray Paint
3
3
Elastic Fabrics (Withdrawn 2000)
(Withdrawn 1997)
D1777Test Method for Thickness of Textile Materials
D3882Test Method for Bow and Skew in Woven and
D2261Test Method for Tearing Strength of Fabrics by the
Knitted Fabrics
Tongue (Single Rip) Procedure (Constant-Rate-of-
D3883Test Method for Yarn Crimp and Yarn Take-up in
Extension Tensile Testing Machine)
Woven Fabrics
D2594TestMethodforStretchPropertiesofKnittedFabrics
D3884Guide for Abrasion Resistance of Textile Fabrics
Having Low Power
(Rotary Platform, Double-Head Method)
D2724Test Methods for Bonded, Fused, and Laminated
D3885Test Method for Abrasion Resistance of Textile
Apparel Fabrics
Fabrics (Flexing and Abrasion Method)
D2906Practice for Statements on Precision and Bias for
3 D3886Test Method for Abrasion Resistance of Textile
Textiles (Withdrawn 2008)
Fabrics (Inflated Diaphragm Apparatus)
D3107Test Methods for Stretch Properties of Fabrics Wo-
D3887Specification for Tolerances for Knitted Fabrics
ven from Stretch Yarns
D3939Test Method for Snagging Resistance of Fabrics
D3511TestMethodforPillingResistanceandOtherRelated
(Mace)
Surface Changes of Textile Fabrics: Brush Pilling Tester
D3990Terminology Relating to Fabric Defects
D4032Test Method for Stiffness of Fabric by the Circular
1
ThisterminologyisunderthejurisdictionofASTMCommitteeD13onTextiles
Bend Procedure
and is the direct responsibility of Subcommittee D13.59 on Fabric Test Methods,
D4033Test Method for Resistance to Yarn Slippage at the
General.
Current edition approved July 1, 2013. Published August 2013. Originally
Sewn Seam in Upholstery Fabrics (Dynamic Fatigue
approved in 1989. Last previous edition approved in 2012 as D4850–12. DOI: 3
Method) (Withdrawn 2001)
10.1520/D4850-13E01.
2 D4034Test Method for Resistance to Yarn Slippage at the
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Sewn Seam in Woven Upholstery Fabrics (Withdrawn
3
Standards volume information, refer to the standard’s Document Summary page on
2001)
the ASTM website.
3 D4157Test Method for Abrasion Resistance of Textile
The last approved version of this historical standard is referenced on
www.astm.org. Fabrics (Oscillatory Cylinder Method)
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
´1
D4850 − 13
D4158Guide for Abrasion Resistance of Textile Fabrics 3. Terminology
(Uniform Abrasion)
3.1 Definitions:
D4390Practice for Evaluation of the Performance of Terry
abrasion, n—the wearing away of any part of a material by
Bathroom Products for Household Use (Withdrawn
rubbing against another surface. D3884, D3885, D3886,
3
1994)
D4157, D4158, D4685, D4966
D4772Test Method for Surface Water Absorption of Terry
abrasion cycle, n—onecompletemovementacrossthesurface
Fabrics
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
´1
Designation: D4850 − 13 D4850 − 13
Standard Terminology Relating to
1
Fabrics and Fabric Test Methods
This standard is issued under the fixed designation D4850; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Terms were added editorially in September 2016.
1. Scope
1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally
understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms
related to textile fabrics are shown in 2.1
2. Referenced Documents
2
2.1 ASTM Standards:
D737 Test Method for Air Permeability of Textile Fabrics
D1230 Test Method for Flammability of Apparel Textiles
D1336 Test Method for Distortion of Yarn in Woven Fabrics
D1388 Test Method for Stiffness of Fabrics
D1424 Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
3
D1775 Test Method for Tension and Elongation of Wide Elastic Fabrics (Withdrawn 2000)
D1777 Test Method for Thickness of Textile Materials
D2261 Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile
Testing Machine)
D2594 Test Method for Stretch Properties of Knitted Fabrics Having Low Power
D2724 Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
3
D2906 Practice for Statements on Precision and Bias for Textiles (Withdrawn 2008)
D3107 Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
D3511 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
D3512 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
D3514 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
D3773 Test Methods for Length of Woven Fabric
D3774 Test Method for Width of Textile Fabric
D3775 Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
D3776 Test Methods for Mass Per Unit Area (Weight) of Fabric
D3786 Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
D3787 Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test
3
D3789 Practice for Labeling Cans of Consumer Spray Paint (Withdrawn 1997)
D3882 Test Method for Bow and Skew in Woven and Knitted Fabrics
D3883 Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
D3884 Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
D3885 Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
D3886 Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
D3887 Specification for Tolerances for Knitted Fabrics
D3939 Test Method for Snagging Resistance of Fabrics (Mace)
1
This terminology is under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.59 on Fabric Test Methods, General.
Current edition approved July 1, 2013. Published August 2013. Originally approved in 1989. Last previous edition approved in 2012 as D4850 – 12. DOI:
10.1520/D4850-13.10.1520/D4850-13E01.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
´1
D4850 − 13
D3990 Terminology Relating to Fabric Defects
D4032 Test Method for Stiffness of Fabric by the Circular Bend Procedure
D4033 Test Method for Resistance to Yarn Slippage at the Sewn Seam in Upholstery Fabrics (Dynamic Fatigue Method)
3
(Withdrawn 2001)
3
D4034 Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics (Withdrawn 2001)
D4157 Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)
D4158 Guide for Abrasion Resistance of Textile Fabrics (Uniform Ab
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D4850-23(Terminology)
Standard Terminology Relating to Fabrics and Fabric Test Methods

SCOPE
1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms related to textile fabrics are shown in 2.1  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
ASTM
ASTM D7722-22(Terminology)
Standard Terminology Relating to Assembly of Textile Structures

SCOPE
1.1 This terminology identifies industrial terms related to stitches and seams that are used for the assembly of textile structures.  
1.2 Section 3, Terminology, is categorized into two subsections, specific to the two areas of specialization under this document.  
1.2.1 Section 3.1 Relating to Seams.  
1.2.2 Section 3.2 Relating to Stitches.  
1.3 For other terms relating to textiles refer to Terminology D123.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D3990-12(2020)(Terminology)
Standard Terminology Relating to Fabric Defects

SCOPE
1.1 This terminology covers defects in both woven and knit fabrics. Descriptions of the defects, illustrations, and related material are given under the most frequently used terms; synonym(s) are listed in parentheses and cross referenced.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    8 pages
    English language
    sale 15% off
ASTM
ASTM D4850-23(Terminology)
Standard Terminology Relating to Fabrics and Fabric Test Methods

SCOPE
1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms related to textile fabrics are shown in 2.1  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
ASTM
ASTM D7722-22(Terminology)
Standard Terminology Relating to Assembly of Textile Structures

SCOPE
1.1 This terminology identifies industrial terms related to stitches and seams that are used for the assembly of textile structures.  
1.2 Section 3, Terminology, is categorized into two subsections, specific to the two areas of specialization under this document.  
1.2.1 Section 3.1 Relating to Seams.  
1.2.2 Section 3.2 Relating to Stitches.  
1.3 For other terms relating to textiles refer to Terminology D123.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D3990-12(2020)(Terminology)
Standard Terminology Relating to Fabric Defects

SCOPE
1.1 This terminology covers defects in both woven and knit fabrics. Descriptions of the defects, illustrations, and related material are given under the most frequently used terms; synonym(s) are listed in parentheses and cross referenced.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    8 pages
    English language
    sale 15% off
ASTM
ASTM F1210-23(Guide)
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

SIGNIFICANCE AND USE
3.1 This guide is meant to aid response teams who may use it during spill response planning and spill events.  
3.2 This guide should be adapted to site specific circumstance.
SCOPE
1.1 This guide covers the use of oil spill dispersants to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal is the basis on which the recommendations are made. Aesthetic and socioeconomic factors are not considered, although these and other factors are often important in spill response.  
1.2 Spill responders have available several means to control or clean up spilled oil. Chemical dispersants should be given equal consideration with other spill countermeasures.  
1.3 This is a general guide only. Oil, as used in this guide, includes crude oils and refined petroleum products. Differences between individual dispersants or between different oil products are not considered. The dispersibility of the oil with the chosen dispersant should be evaluated.  
1.4 The guide is organized by habitat type, for example, small ponds and lakes, rivers and streams, and land. It considers the use of dispersants primarily to protect habitats from impact (or to minimize impacts).  
1.5 This guide applies only to freshwater and other inland environments. It does not consider the direct application of dispersants to subsurface waters.  
1.6 In making dispersant use decisions, appropriate government authorities should be consulted as required by law.  
1.7 This guide does not address getting regulatory approval.  
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D1751-23(Specification)
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)

SCOPE
1.1 This specification covers preformed expansion joint filler having relatively little extrusion and substantial recovery after release from compression.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
Note 1: Attention is called to Specifications D1752 and D994/D994M.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off