Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation

SIGNIFICANCE AND USE
The testing and inspection of concrete and concrete aggregates are important elements in obtaining quality construction. A testing laboratory providing these services must be selected with care.
A testing laboratory shall be deemed qualified to perform and report the results of its tests if the laboratory meets the requirements of this practice. The testing laboratory services shall be provided under the technical direction of a registered professional engineer.
This practice establishes essential characteristics pertaining to the organization, personnel, facilities, and quality systems of the laboratory. This practice may be supplemented by more specific criteria and requirements for particular projects.
SCOPE
1.1 This practice identifies and defines the duties, responsibilities, and minimum technical requirements of testing laboratory personnel and the minimum technical requirements for laboratory equipment utilized in testing concrete and concrete aggregates for use in construction.  
1.2 This practice provides criteria for the evaluation of the capability of a testing laboratory to perform designated ASTM test methods on concrete and concrete aggregates. It can be used by an evaluation authority in the inspection or accreditation of a laboratory or by other parties to determine if the laboratory is qualified to conduct the specified tests.
Note 1—Specification E329 provides criteria for the evaluation of laboratories that perform the inspection of concrete during placement.
1.3 This practice provides criteria for Inspection Bodies and Accreditation Bodies that provide services for evaluation of testing laboratories in accordance with this practice.
1.4 If the laboratory requires external technical services to conduct tests, the external agency shall be subject to separate evaluation.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
14-Apr-2010
Current Stage
Ref Project

Relations

Buy Standard

Standard
ASTM C1077-10a - Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
REDLINE ASTM C1077-10a - Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information.
Designation:C1077–10a
Standard Practice for
Laboratories Testing Concrete and Concrete Aggregates for
1
Use in Construction and Criteria for Laboratory Evaluation
This standard is issued under the fixed designation C1077; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* C39/C39M Test Method for Compressive Strength of Cy-
lindrical Concrete Specimens
1.1 This practice identifies and defines the duties, responsi-
C40 Test Method for Organic Impurities in FineAggregates
bilities, and minimum technical requirements of testing labo-
for Concrete
ratory personnel and the minimum technical requirements for
C117 TestMethodforMaterialsFinerthan75-µm(No.200)
laboratory equipment utilized in testing concrete and concrete
Sieve in Mineral Aggregates by Washing
aggregates for use in construction.
C125 Terminology Relating to Concrete and Concrete Ag-
1.2 This practice provides criteria for the evaluation of the
gregates
capability of a testing laboratory to perform designatedASTM
C127 Test Method for Density, Relative Density (Specific
test methods on concrete and concrete aggregates. It can be
Gravity), and Absorption of Coarse Aggregate
used by an evaluation authority in the inspection or accredita-
C128 Test Method for Density, Relative Density (Specific
tion of a laboratory or by other parties to determine if the
Gravity), and Absorption of Fine Aggregate
laboratory is qualified to conduct the specified tests.
C136 Test Method for Sieve Analysis of Fine and Coarse
NOTE 1—Specification E329 provides criteria for the evaluation of
Aggregates
laboratories that perform the inspection of concrete during placement.
C138/C138M Test Method for Density (Unit Weight),
1.3 This practice provides criteria for Inspection Bodies and
Yield, and Air Content (Gravimetric) of Concrete
Accreditation Bodies that provide services for evaluation of
C143/C143M Test Method for Slump of Hydraulic-Cement
testing laboratories in accordance with this practice.
Concrete
1.4 If the laboratory requires external technical services to
C172 Practice for Sampling Freshly Mixed Concrete
conduct tests, the external agency shall be subject to separate
C173/C173M Test Method for Air Content of Freshly
evaluation.
Mixed Concrete by the Volumetric Method
1.5 This standard does not purport to address all of the
C231 Test Method for Air Content of Freshly Mixed Con-
safety concerns, if any, associated with its use. It is the
crete by the Pressure Method
responsibility of the user of this standard to establish appro-
C617 Practice for Capping Cylindrical Concrete Specimens
priate safety and health practices and determine the applica-
C802 Practice for Conducting an Interlaboratory Test Pro-
bility of regulatory limitations prior to use.
gram to Determine the Precision of Test Methods for
Construction Materials
2. Referenced Documents
C1064/C1064M Test Method for Temperature of Freshly
2
2.1 ASTM Standards:
Mixed Hydraulic-Cement Concrete
C31/C31M Practice for Making and Curing Concrete Test
C1231/C1231M Practice for Use of Unbonded Caps in
Specimens in the Field
Determination of Compressive Strength of Hardened Con-
crete Cylinders
D75 Practice for Sampling Aggregates
1
This practice is under the jurisdiction of ASTM Committee C09 on Concrete
D2419 Test Method for Sand Equivalent Value of Soils and
andConcreteAggregatesandisthedirectresponsibilityofSubcommitteeC09.98on
Fine Aggregate
Evaluation of Laboratories.
E4 Practices for Force Verification of Testing Machines
Current edition approved April 15, 2010. Published May 2010. Originally
E11 SpecificationforWovenWireTestSieveClothandTest
approved in 1987. Last previous edition approved in 2010 as C1077–10. DOI:
10.1520/C1077-10a.
Sieves
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
E329 Specification for Agencies Engaged in Construction
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Inspection and/or Testing
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
C1077–10a
5
E1301 Guide for Proficiency Testing by Interlaboratory Concrete Testing. The list is merely a collection of organiza-
Comparisons tions willing to provide this service and is not an endorsement
2.2 ACI Standards: of
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:C1077–10 Designation:C1077–10a
Standard Practice for
Laboratories Testing Concrete and Concrete Aggregates for
1
Use in Construction and Criteria for Laboratory Evaluation
This standard is issued under the fixed designation C1077; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
1.1 This practice identifies and defines the duties, responsibilities, and minimum technical requirements of testing laboratory
personnel and the minimum technical requirements for laboratory equipment utilized in testing concrete and concrete aggregates
for use in construction.
1.2 This practice provides criteria for the evaluation of the capability of a testing laboratory to perform designated ASTM test
methods on concrete and concrete aggregates. It can be used by an evaluation authority in the inspection or accreditation of a
laboratory or by other parties to determine if the laboratory is qualified to conduct the specified tests.
NOTE 1—Specification E329 provides criteria for the evaluation of laboratories that perform the inspection of concrete during placement.
1.3 This practice provides criteria for Inspection Bodies andAccreditation Bodies that provide services for evaluation of testing
laboratories in accordance with this practice.
1.4 If the laboratory requires external technical services to conduct tests, the external agency shall be subject to separate
evaluation.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2
2.1 ASTM Standards:
C31/C31M Practice for Making and Curing Concrete Test Specimens in the Field
C39/C39M Test Method for Compressive Strength of Cylindrical Concrete Specimens
C40 Test Method for Organic Impurities in Fine Aggregates for Concrete
C117 Test Method for Materials Finer than 75-m (No. 200) Sieve in Mineral Aggregates by Washing
C125 Terminology Relating to Concrete and Concrete Aggregates
C127 Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
C128 Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
C136 Test Method for Sieve Analysis of Fine and Coarse Aggregates
C138/C138M Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C143/C143M Test Method for Slump of Hydraulic-Cement Concrete
C172 Practice for Sampling Freshly Mixed Concrete
C173/C173M Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C231 Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C617 Practice for Capping Cylindrical Concrete Specimens
C802 Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction
Materials
C1064/C1064M Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
1
This practice is under the jurisdiction of ASTM Committee C09 on Concrete and Concrete Aggregates and is the direct responsibility of Subcommittee C09.98 on
Evaluation of Laboratories.
Current edition approved Feb. 1,April 15, 2010. Published MarchMay 2010. Originally approved in 1987. Last previous edition approved in 20092010 as
C1077–09b.C1077–10. DOI: 10.1520/C1077-10a.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
C1077–10a
C1231/C1231M Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete
Cylinders
D75 Practice for Sampling Aggregates
D2419 Test Method for Sand Equivalent Value of Soils and Fine Aggregate
E4 Practices for Force Verification of Testing Machines
E11 Specification for Woven Wire Tes
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.