ASTM A106/A106M-14

Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

ABSTRACT
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.
SCOPE
1.1 This specification2 covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1/8 to NPS 48 [DN 6 to DN 1200] (Note 2) inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.Note 1—It is suggested, consideration be given to possible graphitization. Note 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”  
1.2 Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order.  
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 31-May-2014
• ICS: 23.040.10 - Iron and steel pipes
• Technical Committee: A01 - Steel, Stainless Steel and Related Alloys
• Drafting Committee: A01.09 - Carbon Steel Tubular Products

Relations

• Replaces: ASTM A106/A106M-13 - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
• Effective Date: 01-Jun-2014
• Referred By: ASTM F2014-00(2019) - Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
• Effective Date: 01-Jun-2014
• Referred By: ASTM F721-18(2022) - Standard Specification for Gauge Piping Assemblies
• Effective Date: 01-Jun-2014
• Referred By: ASTM G189-07(2021)e1 - Standard Guide for Laboratory Simulation of Corrosion Under Insulation
• Effective Date: 01-Jun-2014
• Referred By: ASTM E2256-19 - Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
• Effective Date: 01-Jun-2014
• Referred By: ASTM A733-16(2022) - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
• Effective Date: 01-Jun-2014
• Referred By: ASTM F682-82a(2023) - Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
• Effective Date: 01-Jun-2014
• Referred By: ASTM F1387-23 - Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
• Effective Date: 01-Jun-2014
• Referred By: ASTM F987-04(2022) - Standard Specification for Portable Intermediate Flush Deck Stanchion
• Effective Date: 01-Jun-2014
• Referred By: ASTM C1847-21 - Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems
• Effective Date: 01-Jun-2014
• Referred By: ASTM F1545-15a(2021) - Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
• Effective Date: 01-Jun-2014
• Referred By: ASTM F1155-10(2019) - Standard Practice for Selection and Application of Piping System Materials
• Effective Date: 01-Jun-2014
• Referred By: ASTM A530/A530M-18 - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
• Effective Date: 01-Jun-2014
• Referred By: ASTM F2015-00(2019) - Standard Specification for Lap Joint Flange Pipe End Applications
• Effective Date: 01-Jun-2014
• Referred By: ASTM A694/A694M-16(2022) - Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
• Effective Date: 01-Jun-2014

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:A106/A106M −14 Usedin USDOE-NE standards
Standard Specification for
1
Seamless Carbon Steel Pipe for High-Temperature Service
This standard is issued under the fixed designationA106/A106M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* 2. Referenced Documents
2 3
1.1 This specification covers seamless carbon steel pipe for 2.1 ASTM Standards:
1
high-temperature service (Note 1)inNPS ⁄8 to NPS 48 [DN 6 A530/A530M Specification for General Requirements for
to DN 1200] (Note 2) inclusive, with nominal (average) wall Specialized Carbon and Alloy Steel Pipe
thickness as given inASME B 36.10M. It shall be permissible E213 Practice for Ultrasonic Testing of Metal Pipe and
to furnish pipe having other dimensions provided such pipe Tubing
complies with all other requirements of this specification. Pipe E309 Practice for Eddy-Current Examination of Steel Tubu-
ordered under this specification shall be suitable for bending, lar Products Using Magnetic Saturation
flanging, and similar forming operations, and for welding. E381 Method of Macroetch Testing Steel Bars, Billets,
Whenthesteelistobewelded,itispresupposedthatawelding Blooms, and Forgings
procedure suitable to the grade of steel and intended use or E570 Practice for Flux Leakage Examination of Ferromag-
service will be utilized. netic Steel Tubular Products
2.2 ASME Standard:
NOTE 1—It is suggested, consideration be given to possible graphitiza-
4
ASMEB 36.10M WeldedandSeamlessWroughtSteelPipe
tion.
NOTE 2—The dimensionless designator NPS (nominal pipe size) [DN
2.3 Military Standards:
5
(diameter nominal)] has been substituted in this standard for such
MIL-STD-129 Marking for Shipment and Storage
traditional terms as “nominal diameter,” “size,” and “nominal size.”
MIL-STD-163 Steel Mill Products, Preparation for Ship-
5
1.2 Supplementary requirements of an optional nature are
ment and Storage
provided for seamless pipe intended for use in applications
2.4 Federal Standard:
5
where a superior grade of pipe is required. These supplemen-
Fed. Std. No. 123 Marking for Shipments (Civil Agencies)
tary requirements call for additional tests to be made and when
Fed. Std. No. 183 Continuous Identification Marking of Iron
5
desired shall be so stated in the order.
and Steel Products
1.3 The values stated in either SI units or inch-pound units
2.5 Other Standards:
6
are to be regarded separately as standard. The values stated in
SSPC-SP 6 Surface Preparation Specification No. 6
each system may not be exact equivalents; therefore, each
3. Ordering Information
system shall be used independently of the other. Combining
values from the two systems may result in non-conformance
3.1 The inclusion of the following, as required will describe
with the standard.
the desired material adequately, when ordered under this
1.4 The following precautionary caveat pertains only to the specification:
3.1.1 Quantity (feet, metres, or number of lengths),
test method portion, Sections 11, 12, and 13 of this specifica-
tion: This standard does not purport to address all of the safety 3.1.2 Name of material (seamless carbon steel pipe),
3.1.3 Grade (Table 1),
concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and 3.1.4 Manufacture (hot-finished or cold-drawn),
health practices and determine the applicability of regulatory
limitations prior to use.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
1
This specification is under the jurisdiction of Committee A01 on Steel, the ASTM website.
4
Stainless Steel and Related Alloysand is the direct responsibility of Subcommittee Available from American Society of Mechanical Engineers (ASME), ASME
A01.09 on Carbon Steel Tubular Products. International Headquarters, Two Park Ave., New York, NY 10016-5990, http://
Current edition approved June 1, 2014. Published June 2014. Originally www.asme.org.
5
approved in 1926. Last previous edition in 2013 as A106/A106M–13. DOI: Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,
10.1520/A0106_A0106M-14. Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.
2 6
For ASME Boiler and Pressure Vessel Code applications see related Specifi- Available from Society for Protective Coatings (SSPC), 40 24th St., 6th Floor,
cations SA-106 in Section II of that Code. Pittsburgh, PA 15222-4656, http://www.sspc.org.
*A Summary of Changes s
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: A106/A106M − 13 A106/A106M − 14 Used in USDOE-NE standards
Standard Specification for
1
Seamless Carbon Steel Pipe for High-Temperature Service
This standard is issued under the fixed designation A106/A106M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
2
1
1.1 This specification covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS ⁄8 to NPS 48 [DN 6 to
DN 1200] (Note 2) inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. It shall be permissible to furnish
pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this
specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be
welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.
NOTE 1—It is suggested, consideration be given to possible graphitization.
NOTE 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional
terms as “nominal diameter,” “size,” and “nominal size.”
1.2 Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a
superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall
be so stated in the order.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each
system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the
two systems may result in non-conformance with the standard.
1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification:
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the
user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations
prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
A530/A530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
2.2 ASME Standard:
4
ASME B 36.10M Welded and Seamless Wrought Steel Pipe
2.3 Military Standards:
5
MIL-STD-129 Marking for Shipment and Storage
5
MIL-STD-163 Steel Mill Products, Preparation for Shipment and Storage
2.4 Federal Standard:
5
Fed. Std. No. 123 Marking for Shipments (Civil Agencies)
5
Fed. Std. No. 183 Continuous Identification Marking of Iron and Steel Products
1
This specification is under the jurisdiction of Committee A01 on Steel, Stainless Steel and Related Alloysand is the direct responsibility of Subcommittee A01.09 on
Carbon Steel Tubular Products.
Current edition approved Oct. 1, 2013June 1, 2014. Published October 2013June 2014. Originally approved in 1926. Last previous edition in 20112013 as
A106/A106M–11.–13. DOI: 10.1520/A0106_A0106M-13.10.1520/A0106_A0106M-14.
2
For ASME Boiler and Pressure Vessel Code applications see related Specifications SA-106 in Section II of that Code.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
4
Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, ThreeTwo Park Ave., New York, NY 10016-5990,
http://www.asme.org.
5
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

----
...